This commit by default enables hiding shard names on MX workers
by simple replacing `pg_table_is_visible()` calls with
`citus_table_is_visible()` calls on the MX worker nodes. The latter
function filters out tables that are known to be shards.
The main motivation of this change is a better UX. The functionality
can be opted out via a GUC.
We also added two views, namely citus_shards_on_worker and
citus_shard_indexes_on_worker such that users can query
them to see the shards and their corresponding indexes.
We also added debug messages such that the filtered tables can
be interactively seen by setting the level to DEBUG1.
Add ability to understand whether a table is a
known shard on MX workers. Note that this is only useful
and applicable for hiding shards on MX worker nodes given
that we can have metadata only there.
When a hash distributed table have a foreign key to a reference
table, there are few restrictions we have to apply in order to
prevent distributed deadlocks or reading wrong results.
The necessity to apply the restrictions arise from cascading
nature of foreign keys. When a foreign key on a reference table
cascades to a distributed table, a single operation over a single
connection can acquire locks on multiple shards of the distributed
table. Thus, any parallel operation on that distributed table, in the
same transaction should not open parallel connections to the shards.
Otherwise, we'd either end-up with a self-distributed deadlock or
read wrong results.
As briefly described above, the restrictions that we apply is done
by tracking the distributed/reference relation accesses inside
transaction blocks, and act accordingly when necessary.
The two main rules are as follows:
- Whenever a parallel distributed relation access conflicts
with a consecutive reference relation access, Citus errors
out
- Whenever a reference relation access is followed by a
conflicting parallel relation access, the execution mode
is switched to sequential mode.
There are also some other notes to mention:
- If the user does SET LOCAL citus.multi_shard_modify_mode
TO 'sequential';, all the queries should simply work with
using one connection per worker and sequentially executing
the commands. That's obviously a slower approach than Citus'
usual parallel execution. However, we've at least have a way
to run all commands successfully.
- If an unrelated parallel query executed on any distributed
table, we cannot switch to sequential mode. Because, the essense
of sequential mode is using one connection per worker. However,
in the presence of a parallel connection, the connection manager
picks those connections to execute the commands. That contradicts
with our purpose, thus we error out.
- COPY to a distributed table cannot be executed in sequential mode.
Thus, if we switch to sequential mode and COPY is executed, the
operation fails and there is currently no way of implementing that.
Note that, when the local table is not empty and create_distributed_table
is used, citus uses COPY internally. Thus, in those cases,
create_distributed_table() will also fail.
- There is a GUC called citus.enforce_foreign_key_restrictions
to disable all the checks. We added that GUC since the restrictions
we apply is sometimes a bit more restrictive than its necessary.
The user might want to relax those. Similarly, if you don't have
CASCADEing reference tables, you might consider disabling all the
checks.
-[x] drop constraint
-[x] drop column
-[x] alter column type
-[x] truncate
are sequentialized if there is a foreign constraint from
a distributed table to a reference table on the affected relations
by the above commands.
Make sure that intermediate results use a connection that is
not associated with any placement. That is useful in two ways:
- More complex queries can be executed with CTEs
- Safely use the same connections when there is a foreign key
to reference table from a distributed table, which needs to
use the same connection for modifications since the reference
table might cascade to the distributed table.
To support more flexible (i.e. not at compile-time) specification of
libpq connection parameters, this change adds a new GUC, node_conninfo,
which must be a space-separated string of key-value pairs suitable for
parsing by libpq's connection establishment methods.
To avoid rebuilding and parsing these values at connection time, this
change also adds a cache in front of the configuration params to permit
immediate use of any previously-calculated parameters.
After this commit DDL commands honour `citus.multi_shard_modify_mode`.
We preferred using the code-path that executes single task router
queries (e.g., ExecuteSingleModifyTask()) in order not to invent
a new executor that is only applicable for DDL commands that require
sequential execution.
* Change worker_hash_partition_table() such that the
divergence between Citus planner's hashing and
worker_hash_partition_table() becomes the same.
* Rename single partitioning to single range partitioning.
* Add single hash repartitioning. Basically, logical planner
treats single hash and range partitioning almost equally.
Physical planner, on the other hand, treats single hash and
dual hash repartitioning almost equally (except for JoinPruning).
* Add a new GUC to enable this feature
- changes in ruleutils_11.c is reflected
- vacuum statement api change is handled. We now allow
multi-table vacuum commands.
- some other function header changes are reflected
- api conflicts between PG11 and earlier versions
are handled by adding shims in version_compat.h
- various regression tests are fixed due output and
functionality in PG1
- no change is made to support new features in PG11
they need to be handled by new commit
Before this commit, we had a divergence among
the creation of master/worker extended op nodes.
This commit moves the related parts into a single place
and allows the creation of master/extended op nodes to
share a common data structure.
After this commit large_table_shard_count wont be used to
check whether broadcast join, which is renamed as reference
join, can be applied. Reference join can only be applied over
reference tables.
Previously, we prevented creation of partitioned tables on Citus MX.
We decided to not focus on this feature until there is a need. Since
now there are requests for this feature, we are implementing support
for partitioned tables on Citus MX.
After this change all the logic related to shard data fetch logic
will be removed. Planner won't plan any ShardFetchTask anymore.
Shard fetch related steps in real time executor and task-tracker
executor have been removed.
Pushing down limit and order by into workers may produce
wrong output when distinct on() clause has expressions,
aggregates, or window functions.
This checking allows pushing down of limits only if
distinct clause is a superset of group by clause. i.e. it contains all clauses in group by.
This is the first of series of window function work.
We can now support window functions that can be pushed down to workers.
Window function must have distribution column in the partition clause
to be pushed down.
With #1804 (and related PRs), Citus gained the ability to
plan subqueries that are not safe to pushdown.
There are two high-level requirements for pushing down subqueries:
* Individual subqueries that require a merge step (i.e., GROUP BY
on non-distribution key, or LIMIT in the subquery etc). We've
handled such subqueries via #1876.
* Combination of subqueries that are not joined on distribution keys.
This commit aims to recursively plan some of such subqueries to make
the whole query safe to pushdown.
The main logic behind non colocated subquery joins is that we pick
an anchor range table entry and check for distribution key equality
of any other subqueries in the given query. If for a given subquery,
we cannot find distribution key equality with the anchor rte, we
recursively plan that subquery.
We also used a hacky solution for picking relations as the anchor range
table entries. The hack is that we wrap them into a subquery. This is only
necessary since some of the attribute equivalance checks are based on
queries rather than range table entries.
We use PostgreSQL hooks to accumulate the join restrictions
and PostgreSQL gives us all the join paths it tries while
deciding on the join order. Thus, for queries that have many
joins, this function is likely to remove lots of duplicate join
restrictions. This becomes relevant for Citus on query pushdown
check peformance.
VLAs aren't supported by Visual Studio.
- Remove all existing instances of VLAs.
- Add a flag, -Werror=vla, which makes gcc refuse to compile if we add
VLAs in the future.
* Don't use expressions inside compound statements
* Don't depend on __builtin_constant_p
* Remove reliance on S_ISLNK
* Replace use of __func__: older mcvs doesn't support this builtin
This commit introduces a new GUC to limit the intermediate
result size which we handle when we use read_intermediate_result
function for CTEs and complex subqueries.
With this commit, Citus recursively plans subqueries that
are not safe to pushdown, in other words, requires a merge
step.
The algorithm is simple: Recursively traverse the query from bottom
up (i.e., bottom meaning the leaf queries). On each level, check
whether the query is safe to pushdown (or a single repartition
subquery). If the answer is yes, do not touch that subquery. If the
answer is no, plan the subquery seperately (i.e., create a subPlan
for it) and replace the subquery with a call to
`read_intermediate_results(planId, subPlanId)`. During the the
execution, run the subPlans first, and make them avaliable to the
next query executions.
Some of the queries hat this change allows us:
* Subqueries with LIMIT
* Subqueries with GROUP BY/DISTINCT on non-partition keys
* Subqueries involving re-partition joins, router queries
* Mixed usage of subqueries and CTEs (i.e., use CTEs in
subqueries as well). Nested subqueries as long as we
support the subquery inside the nested subquery.
* Subqueries with local tables (i.e., those subqueries
has the limitation that they have to be leaf subqueries)
* VIEWs on the distributed tables just works (i.e., the
limitations mentioned below still applies to views)
Some of the queries that is still NOT supported:
* Corrolated subqueries that are not safe to pushdown
* Window function on non-partition keys
* Recursively planned subqueries or CTEs on the outer
side of an outer join
* Only recursively planned subqueries and CTEs in the FROM
(i.e., not any distributed tables in the FROM) and subqueries
in WHERE clause
* Subquery joins that are not on the partition columns (i.e., each
subquery is individually joined on partition keys but not the upper
level subquery.)
* Any limitation that logical planner applies such as aggregate
distincts (except for count) when GROUP BY is on non-partition key,
or array_agg with ORDER BY
Postgres provides OS agnosting formatting macros for
formatting 64 bit numbers. Replaced %ld %lu with
INT64_FORMAT and UINT64_FORMAT respectively.
Also found some incorrect usages of formatting
flags and fixed them.
In subquery pushdown, we first ensure that each relation is joined with at least
on another relation on the partition keys. That's fine given that the decision
is binary: pushdown the query at all or not.
With recursive planning, we'd want to check whether any specific part
of the query can be pushded down or not. Thus, we need the ability to
understand which part(s) of the subquery is safe to pushdown. This commit
adds the infrastructure for doing that.
Onder Kalaci
mehmet furkan şahin
Nils Dijk
Jason Petersen
Marco Slot
velioglu
Murat Tuncer
Dimitri Fontaine
Burak Yucesoy
Metin Doslu
Murat Tuncer
Markus Sintonen
Brian Cloutier
Brian Cloutier
Marco Slot