To run tests in parallel use:
```bash
make check-arbitrary-configs parallel=4
```
To run tests sequentially use:
```bash
make check-arbitrary-configs parallel=1
```
To run only some configs:
```bash
make check-arbitrary-base CONFIGS=CitusSingleNodeClusterConfig,CitusSmallSharedPoolSizeConfig
```
To run only some test files with some config:
```bash
make check-arbitrary-base CONFIGS=CitusSingleNodeClusterConfig EXTRA_TESTS=dropped_columns_1
```
To get a deterministic run, you can give the random's seed:
```bash
make check-arbitrary-configs parallel=4 seed=12312
```
The `seed` will be in the output of the run.
In our regular regression tests, we can see all the details about either planning or execution but this means
we need to run the same query under different configs/cluster setups again and again, which is not really maintanable.
When we don't care about the internals of how planning/execution is done but the correctness, especially with different configs
this infrastructure can be used.
With `check-arbitrary-configs` target, the following happens:
- a bunch of configs are loaded, which are defined in `config.py`. These configs have different settings such as different shard count, different citus settings, postgres settings, worker amount, or different metadata.
- For each config, a separate data directory is created for tests in `tmp_citus_test` with the config's name.
- For each config, `create_schedule` is run on the coordinator to setup the necessary tables.
- For each config, `sql_schedule` is run. `sql_schedule` is run on the coordinator if it is a non-mx cluster. And if it is mx, it is either run on the coordinator or a random worker.
- Tests results are checked if they match with the expected.
When tests results don't match, you can see the regression diffs in a config's datadir, such as `tmp_citus_tests/dataCitusSingleNodeClusterConfig`.
We also have a PostgresConfig which runs all the test suite with Postgres.
By default configs use regular user, but we have a config to run as a superuser as well.
So the infrastructure tests:
- Postgres vs Citus
- Mx vs Non-Mx
- Superuser vs regular user
- Arbitrary Citus configs
When you want to add a new test, you can add the create statements to `create_schedule` and add the sql queries to `sql_schedule`.
If you are adding Citus UDFs that should be a NO-OP for Postgres, make sure to override the UDFs in `postgres.sql`.
You can add your new config to `config.py`. Make sure to extend either `CitusDefaultClusterConfig` or `CitusMXBaseClusterConfig`.
On the CI, upon a failure, all logfiles will be uploaded as artifacts, so you can check the artifacts tab.
All the regressions will be shown as part of the job on CI.
In your local, you can check the regression diffs in config's datadirs as in `tmp_citus_tests/dataCitusSingleNodeClusterConfig`.
Add/fix tests
Fix creating partitions
Add test for mx - partition creating case
Enable cascading to partitioned tables
Fix mx partition adding test
Fix cascading through fkeys
Style
Disable converting with non-inherited fkeys
Fix detach bug
Early return in case of cascade & Add tests
Style
Fix undistribute_table bug & Fix test outputs
Remove RemovePartitionRelationIds
Test with undistribute_table
Add test for mx+convert+undistribute
Remove redundant usage of CreatePartitionedCitusLocalTable
Add some comments
Introduce bulk functions for generating attach/detach partition commands
Fix: Convert partitioned tables after adding fkey
Change the error message for partitions
Introduce function ErrorIfPartitionTableAddedToMetadata
Polish attach/detach command generation functions
Use time_partitions for testing
Move mx tests to citus_local_tables_mx
Add new partitioned table to cascade test
Add test with time series management UDFs
Fix test output
Fix: Assertion fail on relation access tracking
Style
Refactor creating partitioned citus local tables
Remove CreatePartitionedCitusLocalTable
Style
Error out if converting multi-level table
Revert some old tests
Error out adding partitioned partition
Polish
Polish/address
Fix create table partition of case
Use CascadeOperationForRelationIdList if no cascade needed
Fix create partition bug
Revert / Add new tests to mx
Style
Fix dropping fkey bug
Add test with IF NOT EXISTS
Convert to CLT when doing ATTACH PARTITION
Add comments
Add more tests with time series management
Edit the error message for converting the child
Use OR instead of AND in ErrorIfUnsupportedAlterTableStmt
Edit/improve tests
Disable ddl prop when dropping default column definitions
Disable/enable ddl prop just before/after the command
Add comment
Add sequence test
Add trigger test
Remove NeedCascadeViaForeignKeys
Add one more insert to sequence test
Add comment
Style
Fix test output shard ids
Update comments
Disable creating fkey on partitions
Move partition check to CreateCitusLocalTable
Add comment
Add check for attachingmulti-level partition
Add test for pg_constraint
Check pg_dist_partition in tests
Add test inserting on the worker
* Add udf to include shardId in broken partition shard index names
* Address reviews: rename index such that operations can be done on it
* More comprehensive index tests
* Final touches and formatting
Under high write concurrency, we were sometimes reading columnar
metapage as all zeros.
In `WriteToBlock()`, if `clear == true`, then it will clear the page before
writing the new one, rather than just adding data to the page. That
means any concurrent connection that is holding only a pin will be
able to see the all-zero state between the `InitPage()` and the
`memcpy_s()`.
Moreover, postgres/storage/buffer/README states that:
> Buffer access rules:
>
> 1. To scan a page for tuples, one must hold a pin and either shared or
> exclusive content lock. To examine the commit status (XIDs and status bits)
> of a tuple in a shared buffer, one must likewise hold a pin and either shared
> or exclusive lock.
For those reasons, we have to make sure to never keep a pin on the
page without (at least) the shared lock, to avoid having such problems.
A write operation might trigger index deletion if index already had
dead entries for the key we are about to insert.
There are two ways of index deletion:
a) simple deletion
b) bottom-up deletion (>= pg14)
Since columnar_index_fetch_tuple never sets all_dead to true,
columnarAM doesn't ever expect to receive simple deletion requests
(columnar_index_delete_tuples) as we don't mark any index entries
as dead.
However, since columnarAM doesn't delete any dead entries via simple
deletion, postgres might ask for a more comprehensive deletion
(i.e.: bottom-up) at some point when pg >= 14.
So with this commit, we start gracefully ignoring bottom-up deletion
requests made to columnar_index_delete_tuples.
Given that users can anyway "VACUUM FULL" their columnar tables,
we don't see any problem in ignoring deletion requests.
* Make (columnar.stripe) first_row_number index a unique constraint
Since stripe_first_row_number_idx is required to scan a columnar
table, we need to make sure that it is created before doing anything
with columnar tables during pg upgrades.
However, a plain btree index is not a dependency of a table, so
pg_upgrade cannot guarantee that stripe_first_row_number_idx gets
created when creating columnar.stripe, unless we make it a unique
"constraint".
To do that, drop stripe_first_row_number_idx and create a unique
constraint with the same name to keep the code change at minimum.
* Add more pg upgrade tests for columnar
* Fix a logic error in uprade_columnar_after test
Co-authored-by: Onur Tirtir <onurcantirtir@gmail.com>
We were trying to find the cause for a strange update bug. We thought
`pg_upgrade` succeeded and then were surprised that certain data was not
in the database after the upgrade. Instead `pg_upgrade` had failed
halfway through with an actionable error. It took us pretty long to
realise this.
This commit adds checking of exit codes to a lot more subprocess
executions. That should make debugging in the future much easier.
BuildStripeMetadata() calls HeapTupleHeaderGetXmin(), which must only
be called on a proper heap tuple with MVCC information. Make sure the
caller passes the heap tuple, and not a datum tuple.
BuildStripeMetadata() calls HeapTupleHeaderGetXmin(), which must only
be called on a proper heap tuple with MVCC information. Make sure the
caller passes the heap tuple, and not a datum tuple.
Fixes#5318.
Considering all code-paths that we might interact with a columnar table,
add `CheckCitusVersion` calls to tableAM callbacks:
- initializing table scan (`columnar_beginscan` & `columnar_index_fetch_begin`)
- setting a new filenode for a relation (storage initializiation or a table rewrite)
- truncating the storage
- inserting tuple (single and multi)
Also add `CheckCitusVersion` call to:
- drop hook (`ColumnarTableDropHook`)
- `alter_columnar_table_set` & `alter_columnar_table_reset` UDFs
Onur Tirtir
Ahmet Gedemenli
SaitTalhaNisanci
Hanefi Onaldi
Önder Kalacı
Teja Mupparti
Marco Slot
Marco Slot
Halil Ozan Akgül
Naisila Puka
Onder Kalaci
Jelte Fennema
Jeff Davis
tejeswarm