What we do to collect foreign key constraint commands in
WorkerCreateShardCommandList is quite similar to what we do in
CopyShardForeignConstraintCommandList. Plus, the code that we used
in WorkerCreateShardCommandList before was not able to properly handle
foreign key constraints between Citus local tables --when creating a
reference table from the referencing one.
With a few slight modifications made to
CopyShardForeignConstraintCommandList, we can use the same logic in
WorkerCreateShardCommandList too.
With this PR, we allow creating distributed tables with without
specifying a shard key via create_distributed_table(). Here are the
the important details about those tables:
* Specifying `shard_count` is not allowed because it is assumed to be 1.
* We mostly call such tables as "null shard-key" table in code /
comments.
* To avoid doing a breaking layout change in create_distributed_table();
instead of throwing an error, it will inform the user that
`distribution_type`
param is ignored unless it's explicitly set to NULL or 'h'.
* `colocate_with` param allows colocating such null shard-key tables to
each other.
* We define this table type, i.e., NULL_SHARD_KEY_TABLE, as a subclass
of
DISTRIBUTED_TABLE because we mostly want to treat them as distributed
tables in terms of SQL / DDL / operation support.
* Metadata for such tables look like:
- distribution method => DISTRIBUTE_BY_NONE
- replication model => REPLICATION_MODEL_STREAMING
- colocation id => **!=** INVALID_COLOCATION_ID (distinguishes from
Citus local tables)
* We assign colocation groups for such tables to different nodes in a
round-robin fashion based on the modulo of "colocation id".
Note that this PR doesn't care about DDL (except CREATE TABLE) / SQL /
operation (i.e., Citus UDFs) support for such tables but adds a
preliminary
API.
DESCRIPTION: Refactor and unify shard move and copy functions
Shard move and copy functions share a lot of code in common. This PR
unifies these functions into one, along with some helper functions. To
preserve the current behavior, we'll introduce and use an enum
parameter, and hardcoded strings for producing error/warning messages.
This pull request proposes a change to the logic used for propagating
identity columns to worker nodes in citus. Instead of creating a
dependent sequence for each identity column and changing its default
value to `nextval(seq)/worker_nextval(seq)`, this update will pass the
identity columns as-is to the worker nodes.
Please note that there are a few limitations to this change.
1. Only bigint identity columns will be allowed in distributed tables to
ensure compatibility with the DDL from any node functionality. Our
current distributed sequence implementation only allows insert
statements from all nodes for bigint sequences.
2. `alter_distributed_table` and `undistribute_table` operations will
not be allowed for tables with identity columns. This is because we do
not have a proper way of keeping sequence states consistent across the
cluster.
DESCRIPTION: Prevents using identity columns on data types other than
`bigint` on distributed tables
DESCRIPTION: Prevents using `alter_distributed_table` and
`undistribute_table` UDFs when a table has identity columns
DESCRIPTION: Fixes a bug that prevents enforcing identity column
restrictions on worker nodes
Depends on #6740Fixes#6694
Previously we would create foreign keys to reference table in an extra
fast way at the end of a shard move. This uses that same logic to also
do it for foreign keys between distributed tables.
Fixes#6141
* Blocking split setup
* Add missing type
* Missing API from Metadata Sync
* Shard Split e2e code
* Worker Split Copy DestReceiver skeleton
* Basic destreceiver code
* worker_split_copy UDF
* UDF calling
* Split points are text
* Isolate Tenant and Split Shard Unification
* Fixing executor and misc
* Reindent code
* Fixing UDF definitions
* Hello World Local Copy works
* Remote copy hello world works
* Local and Remote binary test
* Fixing text local copy and adding tests
* Hello World shard split works
* Negative tests
* Blocking Split workflow works
* Refactor
* Bug fix
* Reindent
* Cleaning up and adding comments
* Basic test for shard split workflow
* ReIndent
* Circle CI integration
* Removing include causing circle-ci build failure
* Remove SplitCopyDestReceiver and use PartitionedResultDestReceiver
* Add support for citus.enable_binary_protocol
* Reindent
* Fix build break
* Update Test
* Cleanup on catch
* Addressing open comments
* Update downgrade script and quote schema/table in COPY statement
* Fix metadata sync issue. Update regression test
* Isolation test and bug fix
* Add Isolation test, fix foreign constraint deadlock issue
* Misc code review comments
* Test name needing to be quoted
* Refactor code from review comments
* Explaining shardGroupSplitIntervalListList
* Fix upgrade & downgrade
* Fix broken test
* Test fix Round 2
* Fixing bug and modifying test appropriately
* Fully qualify copy udf name. Run Reindent
* Address PR comments
* Fix null handling when creating AuxiliaryStructures
* Ensure local copy is triggered in tests
* Limit max shards that can be created with split
* Test failure fix
* Remove split_mode and use shard_transfer_mode instead'
* Fix test failure
* Fix test failure
* Fixing permission issue when splitting non-superuser owned tables
* Fix test expected output
* Remove extra space
* Fix test
* attempt to fix test
* Addressing Marco's PR comment
* Only clean shards created by workflow
* Remove from merge
* Update test
This PR makes all of the features open source that were previously only
available in Citus Enterprise.
Features that this adds:
1. Non blocking shard moves/shard rebalancer
(`citus.logical_replication_timeout`)
2. Propagation of CREATE/DROP/ALTER ROLE statements
3. Propagation of GRANT statements
4. Propagation of CLUSTER statements
5. Propagation of ALTER DATABASE ... OWNER TO ...
6. Optimization for COPY when loading JSON to avoid double parsing of
the JSON object (`citus.skip_jsonb_validation_in_copy`)
7. Support for row level security
8. Support for `pg_dist_authinfo`, which allows storing different
authentication options for different users, e.g. you can store
passwords or certificates here.
9. Support for `pg_dist_poolinfo`, which allows using connection poolers
in between coordinator and workers
10. Tracking distributed query execution times using
citus_stat_statements (`citus.stat_statements_max`,
`citus.stat_statements_purge_interval`,
`citus.stat_statements_track`). This is disabled by default.
11. Blocking tenant_isolation
12. Support for `sslkey` and `sslcert` in `citus.node_conninfo`
With this commit we've started to propagate sequences and shell
tables within the object dependency resolution. So, ensuring any
dependencies for any object will consider shell tables and sequences
as well. Separate logics for both shell tables and sequences have
been removed.
Since both shell tables and sequences logic were implemented as a
part of the metadata handling before that logic, we were propagating
them while syncing table metadata. With this commit we've divided
metadata (which means anything except shards thereafter) syncing
logic into multiple parts and implemented it either as a part of
ActivateNode. You can check the functions called in ActivateNode
to check definition of different metadata.
Definitions of start_metadata_sync_to_node and citus_activate_node
have also been updated. citus_activate_node will basically create
an active node with all metadata and reference table shards.
start_metadata_sync_to_node will be same with citus_activate_node
except replicating reference tables. stop_metadata_sync_to_node
will remove all the metadata. All of those UDFs need to be called
by superuser.
Moving shards of reference tables was possible in at least one case:
```sql
select citus_disable_node('localhost', 9702);
create table r(x int);
select create_reference_table('r');
set citus.replicate_reference_tables_on_activate = off;
select citus_activate_node('localhost', 9702);
select citus_move_shard_placement(102008, 'localhost', 9701, 'localhost', 9702);
```
This would then remove the reference table shard on the source, causing
all kinds of issues. This fixes that by disallowing all shard moves
except for shards of distributed tables.
Co-authored-by: Onur Tirtir <onurcantirtir@gmail.com>
* Replace master_add_node with citus_add_node
* Replace master_activate_node with citus_activate_node
* Replace master_add_inactive_node with citus_add_inactive_node
* Use master udfs in old scripts
* Replace master_add_secondary_node with citus_add_secondary_node
* Replace master_disable_node with citus_disable_node
* Replace master_drain_node with citus_drain_node
* Replace master_remove_node with citus_remove_node
* Replace master_set_node_property with citus_set_node_property
* Replace master_unmark_object_distributed with citus_unmark_object_distributed
* Replace master_update_node with citus_update_node
* Replace master_update_shard_statistics with citus_update_shard_statistics
* Replace master_update_table_statistics with citus_update_table_statistics
* Rename master_conninfo_cache_invalidate to citus_conninfo_cache_invalidate
Rename master_dist_local_group_cache_invalidate to citus_dist_local_group_cache_invalidate
* Replace master_copy_shard_placement with citus_copy_shard_placement
* Replace master_move_shard_placement with citus_move_shard_placement
* Rename master_dist_node_cache_invalidate to citus_dist_node_cache_invalidate
* Rename master_dist_object_cache_invalidate to citus_dist_object_cache_invalidate
* Rename master_dist_partition_cache_invalidate to citus_dist_partition_cache_invalidate
* Rename master_dist_placement_cache_invalidate to citus_dist_placement_cache_invalidate
* Rename master_dist_shard_cache_invalidate to citus_dist_shard_cache_invalidate
* Drop master_modify_multiple_shards
* Rename master_drop_all_shards to citus_drop_all_shards
* Drop master_create_distributed_table
* Drop master_create_worker_shards
* Revert old function definitions
* Add missing revoke statement for citus_disable_node
When distributing a columnar table, as well as changing options on a distributed columnar table, this patch will forward the settings from the coordinator to the workers.
For propagating options changes on an already distributed table this change is pretty straight forward. Before applying the change in options locally we will create a `DDLJob` that contains a call to `alter_columnar_table_set(...)` for every shard placement with all settings of the current table. This goes both for setting an option as well as resetting. This will reset the values to the defaults configured on the coordinator. Having the effect that the coordinator is authoritative on the settings and makes sure the shards have the same settings set as the table on the coordinator.
When a columnar table is distributed it is using the `TableDDLCommand` infra structure to create a new kind of `TableDDLCommand`. This new type, called a `TableDDLCommandFunction` contains a context and 2 function pointers to execute. One function returns the command as applied on the table, the second function will return the sql command to apply to a shard with a given shard id. The schema name is ignored as it will use the fully qualified name of the shard in the same schema as the base table.
Refactor internals on how Citus creates the SQL commands it sends to recreate shards.
Before Citus collected solely ddl commands as `char *`'s to recreate a table. If they were used to create a shard they were wrapped with `worker_apply_shard_ddl_command` and send to the workers. On the workers the UDF wrapping the ddl command would rewrite the parsetree to replace tables names with their shard name equivalent.
This worked well, but poses an issue when adding columnar. Due to limitations in Postgres on creating custom options on table access methods we need to fall back on a UDF to set columnar specific options. Now, to recreate the table, we can not longer rely on having solely DDL statements to recreate a table.
A prototype was made to run this UDF wrapped in `worker_apply_shard_ddl_command`. This became pretty messy, hard to understand and subsequently hard to maintain.
This PR proposes a refactor of the internal representation of table ddl commands into a `TableDDLCommand` structure. The current implementation only supports a `char *` as its contents. Based on the use of the DDL statement (eg. creating the table -mx- or creating a shard) one of two different functions can be called to get the statement to send to the worker:
- `GetTableDDLCommand(TableDDLCommand *command)`: This function returns that ddl command to create the table. In this implementation it will just return the `char *`. This has the same functionality as getting the old list and not wrapping it.
- `GetShardedTableDDLCommand(TableDDLCommand *command, uint64 shardId, char *schemaName)`: This function returns the ddl command wrapped in `worker_apply_shard_ddl_command` with the `shardId` as an argument. Due to backwards compatibility it also accepts a. `schemaName`. The exact purpose is not directly clear. Ideally new implementations would work with fully qualified statements and ignore the `schemaName`.
A future implementation could accept 2.function pointers and a `void *` for context to let the two pointers work on. This gives greater flexibility in controlling what commands get send in which situations. Also, in a future, we could implement the intermediate step of creating the `parsetree` datastructure of statements based on the contents in the catalog with a corresponding deparser. For sharded queries a mutator could be ran over the parsetree to rewrite the tablenames to the names with the shard identifier. This will completely omit the requirement for `worker_apply_shard_ddl_command`.
This commit brings following features:
Foreign key support from citus local tables to reference tables
* Foreign key support from reference tables to citus local tables
(only with RESTRICT & NO ACTION behavior)
* ALTER TABLE ENABLE/DISABLE trigger command support
* CREATE/DROP/ALTER trigger command support
and disallows:
* ALTER TABLE ATTACH/DETACH PARTITION commands
* CREATE TABLE <postgres table> ATTACH PARTITION <citus local table>
commands
* Foreign keys from postgres tables to citus local tables
(the other way was already disallowed)
for citus local tables.
Onur Tirtir
zhjwpku
Ahmet Gedemenli
Gokhan Gulbiz
Marco Slot
Jelte Fennema
Nitish Upreti
Marco Slot
Burak Velioglu
jeff-davis
Naisila Puka
Onder Kalaci
Halil Ozan Akgul
Nils Dijk
citus bot