DESCRIPTION: Implement TEXT SEARCH CONFIGURATION propagation
The change adds support to Citus for propagating TEXT SEARCH CONFIGURATION objects. TSConfig objects cannot always be created in one create statement, and instead require a create statement followed by many alter statements to get turned into the object they should represent.
To support this we add functionality to the worker to create or replace objects based on a list of statements. When the lists of the local object and the remote object correspond 1:1 we skip the creation of the object and simply mark it distributed. This is especially important for TSConfig objects as initdb pre-populates databases with a dozen configurations (for many different languages).
When the user creates a new TSConfig based on the copy of an existing configuration there is no direct link to the object copied from. Since there is no link we can't simply rely on propagating the dependencies to the worker and send a qualified
We check for metadata consistency across the cluster in the test
isolation_metadata_sync_vs_all. However, some earlier tests in
enterprise repo leave invalid pg_dist_node entries in the worker nodes
that have Oid values for already dropped role objects.
To remedy that, I suggest that we move the test to earlier in the
schedule, thereby making the tests pass for the time being. We should
later introduce metadata checking either in a new isolation test or by
moving this test later in the schedule. However, we should do that after
we fix the underlying issue.
The low-level StoreAllActiveTransactions() function filters out
backends that exited.
Before this commit, if you run a pgbench, after that you'd still
see the backends show up:
```SQL
select count(*) from get_global_active_transactions();
┌───────┐
│ count │
├───────┤
│ 538 │
└───────┘
```
After this patch, only active backends show-up:
```SQL
select count(*) from get_global_active_transactions();
┌───────┐
│ count │
├───────┤
│ 72 │
└───────┘
```
DESCRIPTION: Prevent Citus table functions from being called on shards
The operations that guard against using shards are:
* Create Local Table
* Create distributed table (which affects reference table creation as well).
* I used a `ErrorIfRaltionIsKnownShard` instead of `ErrorIfIllegallyChangingKnownShard`.
`ErrorIfIllegallyChangingKnownShard` allows the operation if `citus.enable_manual_changes_to_shards`,
but I am not sure if it ever makes sense to create a distributed, reference, or citus local table out of a shard.
I tried to go over the code to identify other UDF-s where shards could be illegaly changed, but I could not find any other.
My knowledge of the codebase is not solid enough for me to say for sure.
Fixes#5610
This commit introduces several test cases for concurrent operations that
change metadata, and a concurrent metadata sync operation.
The overall structure is as follows:
- Session#1 starts metadata syncing in a transaction block
- Session#2 does an operation that change metadata
- Both sessions are committed
- Another session checks whether the metadata are the same accross all
nodes in the cluster.
* Break the dependency to CitusInitiatedBackend infrastructure
With this change, we start to show non-distributed backends as well
in citus_dist_stat_activity. I think that
(a) it is essential for making citus_lock_waits to work for blocked
on DDL commands.
(b) it is more expected from the user's perspective. The name of
the view is a little inconsistent now (e.g., citus_dist_stat_activity)
but we are already planning to improve the names with followup
PRs.
Also, we have global pids assigned, the CitusInitiatedBackend
becomes obsolete.
With https://github.com/citusdata/citus/pull/5657, Citus uses
a fixed application_name while connecting to remote nodes
for internal purposes.
It means that we cannot allow users to override it via
citus.node_conninfo.
Implement #5649
Allow create_distributed_function() on functions owned by extensions
1) Only update pg_dist_object, and do not propagate CREATE FUNCTION.
2) Ensure corresponding extension is in pg_dist_object.
3) Verify if dependencies exist on the function they should resolve to the extension.
4) Impact on node-scaling: We build a list of ddl commands based on all objects in
pg_dist_object. We need to omit the ddl's for the extension-function, as it
will get propagated by the virtue of the extension creation.
5) Extra checks for functions coming from extensions, to not propagate changes
via ddl commands, even though the function is marked as distributed in pg_dist_object
If the expression is simple, such as, SELECT function() or PEFORM function()
in PL/PgSQL code, PL engine does a simple expression evaluation which can't
interpret the Citus CustomScan Node. Code checks for simple expressions when
executing an UDF but missed the DO-Block scenario, this commit fixes it.
Removed dependency for EnsureTableOwner. Also removed pg_fini() and columnar_tableam_finish() Still need to remove CheckCitusVersion dependency to make Columnar_tableam.h dependency free from Citus.
Previously, we were wrapping targetlist nodes with Vars that reference
to the result of the worker query, if the node itself is not `Const` or
not a `Param`. Indeed, we should not do that unless the node itself is
a `Var` node or contains a `Var` within it (e.g.: `OpExpr(Var(column_a) > 2)`).
Otherwise, when worker query returns empty result set, then combine
query exec would crash since the `Var` would be pointing to an empty
tuple slot, which is not desirable for the node-executor methods.
Replaces citus.enable_object_propagation with citus.enable_metadata_sync
Also, within Citus 11 release cycle, we added citus.enable_metadata_sync_by_default,
that is also replaced with citus.enable_metadata_sync.
In essence, when citus.enable_metadata_sync is set to true, all the objects
and the metadata is send to the remote node.
We strongly advice that the users never changes the value of
this GUC.
With this commit, rebalancer backends are identified by application_name = citus_rebalancer
and the regular internal backends are identified by application_name = citus_internal
With this commit we've started to propagate sequences and shell
tables within the object dependency resolution. So, ensuring any
dependencies for any object will consider shell tables and sequences
as well. Separate logics for both shell tables and sequences have
been removed.
Since both shell tables and sequences logic were implemented as a
part of the metadata handling before that logic, we were propagating
them while syncing table metadata. With this commit we've divided
metadata (which means anything except shards thereafter) syncing
logic into multiple parts and implemented it either as a part of
ActivateNode. You can check the functions called in ActivateNode
to check definition of different metadata.
Definitions of start_metadata_sync_to_node and citus_activate_node
have also been updated. citus_activate_node will basically create
an active node with all metadata and reference table shards.
start_metadata_sync_to_node will be same with citus_activate_node
except replicating reference tables. stop_metadata_sync_to_node
will remove all the metadata. All of those UDFs need to be called
by superuser.
When creating a new table, we bypass the buffer cache and write the
initial pages directly with smgrwrite(). However, you're supposed to
use smgrextend() when extending a relation, rather than smgrwrite().
There isn't much difference between them, but smgrextend() updates the
relation size cache, which seems important, although I haven't seen
any real bugs caused by that.
Also, write the block to disk only after WAL-logging it, so that we
can include the LSN of the WAL record in the version that we write
out. Currently, the page as written to disk has LSN 0. That doesn't
cause any user-visible issues either, at worst it could make us
WAL-log a full page image of the page earlier than necessary, but that
doesn't matter currently because we WAL-log full page images of all
changes anyway.
I bumped into that issue with LSN 0 in the page header when testing
Citus with Zenith (https://github.com/zenithdb/zenith/issues/1176).
Zenith contains a check that PANICs if you write a block to disk
without WAL-logging it, and it works by checking the LSN of the page
that's written out. In this case, we are WAL-logging the page even
though the LSN on the page is 0, so it was a false alarm, but I'd love
to get this changed in Citus to keep the check in Zenith simple.
A downside of WAL-logging the page first is that if you run out of
disk space, you have already created the WAL record. So if you then
crash and restart, WAL recovery will likely run out of disk space,
too, which is bad. In practice, we have the same problem in other
places, like rewriteheap.c. Also, if you are on the brink of running
out of disk space, you will probably run out at WAL replay anyway,
regardless of which order we write these few pages. But if we wanted
to fix that, we could first extend the relation with zeros, and then
WAL-log the pages. That's how heap extension works.
It would be even nicer to use the buffer cache for this, and skip the
smgrimmedsync() on the relation. However, that would require more
work, because we don't have the Relation struct for the relation here.
We could use ReadBufferWithoutRelcache(), but that doesn't work for
unlogged tables. Unlogged tables are currently not supported
(https://github.com/citusdata/citus/issues/4742), but that would
become a problem if we want to support them in the future.
CreateFakeRelcacheEntry() also doesn't work with unlogged tables. We
could do things differently for logged and unlogged tables, but that
complicates the code further.
Co-authored-by: jeff-davis <Jeffrey.Davis@microsoft.com>
Citus heavily relies on application_name, see
`IsCitusInitiatedRemoteBackend()`.
But if the user set the application name, such as export PGAPPNAME=test_name,
Citus uses that name while connecting to the remote node.
With this commit, we ensure that Citus always connects with
the "citus" user name to the remote nodes.
With https://github.com/citusdata/citus/pull/2780, we allow
COPY to use any number of connections that the executor used
in a tx block.
Meaning that, while COPYing data to the shards, create_distributed_table
could allow sequential mode.
We fall back to local execution if we cannot establish any more
connections to local node. However, we should not do that for the
commands that we don't know how to execute locally (or we know we
shouldn't execute locally). To fix that, we take localExecutionSupported
take into account in CanFailoverPlacementExecutionToLocalExecution too.
Moreover, we also prompt a more accurate hint message to inform user
about whether the execution is failed because local execution is
disabled by them, or because local execution wasn't possible for given
command.
multi_log_hook() hook is called by EmitErrorReport() when emitting the
ereport either to frontend or to the server logs. And some callers of
EmitErrorReport() (e.g.: errfinish()) seems to assume that string fields
of given ErrorData object needs to be freed. For this reason, we copy the
message into heap here.
I don't think we have faced with such a problem before but it seems worth
fixing as it is theoretically possible due to the reasoning above.
BEGIN/COMMIT transaction block or in a UDF calling another UDF.
(2) Prohibit/Limit the delegated function not to do a 2PC (or any work on a
remote connection).
(3) Have a safety net to ensure the (2) i.e. we should block the connections
from the delegated procedure or make sure that no 2PC happens on the node.
(4) Such delegated functions are restricted to use only the distributed argument
value.
Note: To limit the scope of the project we are considering only Functions(not
procedures) for the initial work.
DESCRIPTION: Introduce a new flag "force_delegation" in create_distributed_function(),
which will allow a function to be delegated in an explicit transaction block.
Fixes#3265
Once the function is delegated to the worker, on that node during the planning
distributed_planner()
TryToDelegateFunctionCall()
CheckDelegatedFunctionExecution()
EnableInForceDelegatedFuncExecution()
Save the distribution argument (Constant)
ExecutorStart()
CitusBeginScan()
IsShardKeyValueAllowed()
Ensure to not use non-distribution argument.
ExecutorRun()
AdaptiveExecutor()
StartDistributedExecution()
EnsureNoRemoteExecutionFromWorkers()
Ensure all the shards are local to the node in the remoteTaskList.
NonPushableInsertSelectExecScan()
InitializeCopyShardState()
EnsureNoRemoteExecutionFromWorkers()
Ensure all the shards are local to the node in the placementList.
This also fixes a minor issue: Properly handle expressions+parameters in distribution arguments
Nils Dijk
Hanefi Onaldi
Ahmet Gedemenli
Onder Kalaci
Gledis Zeneli
Marco Slot
Teja Mupparti
Halil Ozan Akgul
Burak Velioglu
Ying Xu
Onur Tirtir
jeff-davis
Önder Kalacı
Heikki Linnakangas