When there are multiple localhost entries in /etc/hosts like following
/etc/hosts:
```
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
127.0.0.1 localhost
```
multi_cluster_management check will failed:
```
@@ -857,20 +857,21 @@
ERROR: group 14 already has a primary node
-- check that you can add secondaries and unavailable nodes to a group
SELECT groupid AS worker_2_group FROM pg_dist_node WHERE nodeport = :worker_2_port \gset
SELECT 1 FROM master_add_node('localhost', 9998, groupid => :worker_1_group, noderole => 'secondary');
?column?
----------
1
(1 row)
SELECT 1 FROM master_add_node('localhost', 9997, groupid => :worker_1_group, noderole => 'unavailable');
+WARNING: could not establish connection after 5000 ms
?column?
----------
1
(1 row)
```
This actually isn't just a problem in test environments, but could occur
as well during actual usage when a hostname in pg_dist_node
resolves to multiple IPs and one of those IPs is unreachable.
Postgres will then automatically continue with the next IP, but
Citus should listen for events on the new socket. Not on the
old one.
Co-authored-by: chuhx43211 <chuhx43211@hundsun.com>
This change adds a script to programatically group all includes in a
specific order. The script was used as a one time invocation to group
and sort all includes throught our formatted code. The grouping is as
follows:
- System includes (eg. `#include<...>`)
- Postgres.h (eg. `#include "postgres.h"`)
- Toplevel imports from postgres, not contained in a directory (eg.
`#include "miscadmin.h"`)
- General postgres includes (eg . `#include "nodes/..."`)
- Toplevel citus includes, not contained in a directory (eg. `#include
"citus_verion.h"`)
- Columnar includes (eg. `#include "columnar/..."`)
- Distributed includes (eg. `#include "distributed/..."`)
Because it is quite hard to understand the difference between toplevel
citus includes and toplevel postgres includes it hardcodes the list of
toplevel citus includes. In the same manner it assumes anything not
prefixed with `columnar/` or `distributed/` as a postgres include.
The sorting/grouping is enforced by CI. Since we do so with our own
script there are not changes required in our uncrustify configuration.
This commit is the second and last phase of dropping PG13 support.
It consists of the following:
- Removes all PG_VERSION_13 & PG_VERSION_14 from codepaths
- Removes pg_version_compat entries and columnar_version_compat entries
specific for PG13
- Removes alternative pg13 test outputs
- Removes PG13 normalize lines and fix the test outputs based on that
It is a continuation of 5bf163a27d
Description:
Implementing CDC changes using Logical Replication to avoid
re-publishing events multiple times by setting up replication origin
session, which will add "DoNotReplicateId" to every WAL entry.
- shard splits
- shard moves
- create distributed table
- undistribute table
- alter distributed tables (for some cases)
- reference table operations
The citus decoder which will be decoding WAL events for CDC clients,
ignores any WAL entry with replication origin that is not zero.
It also maps the shard names to distributed table names.
In #6314 I refactored the connection cleanup to be simpler to
understand and use. However, by doing so I introduced a use-after-free
possibility (that valgrind luckily picked up):
In the `ShouldShutdownConnection` path of
`AfterXactHostConnectionHandling`
we free connections without removing the `transactionNode` from the
dlist that it might be part of. Before the refactoring this wasn't a
problem, because the dlist would be completely reset quickly after in
`ResetGlobalVariables` (without reading or writing the dlist entries).
The refactoring changed this by moving the `dlist_delete` call to
`ResetRemoteTransaction`, which in turn was called in the
`!ShouldShutdownConnection` path of `AfterXactHostConnectionHandling`.
Thus this `!ShouldShutdownConnection` path would now delete from the
`dlist`, but the `ShouldShutdownConnection` path would not. Thus to
remove itself the deleting path would sometimes update nodes in the list
that were freed right before.
There's two ways of fixing this:
1. Call `dlist_delete` from **both** of paths.
2. Call `dlist_delete` from **neither** of the paths.
This commit implements the second approach, and #6684 implements the
first. We need to choose which approach we prefer.
To make calling `dlist_delete` from both paths actually work, we also need
to use a slightly different check to determine if we need to call dlist_delete.
Various regression tests showed that there can be cases where the
`transactionState` is something else than `REMOTE_TRANS_NOT_STARTED`
but the connection was not added to the `InProgressTransactions` list
One example of such a case is when running `TransactionStateMachine`
without calling `StartRemoteTransactionBegin` beforehand. In those
cases the connection won't be added to `InProgressTransactions`, but
the `transactionState` is changed to `REMOTE_TRANS_SENT_COMMAND`.
Sidenote: This bug already existed in 11.1, but valgrind didn't catch it
back then. My guess is that this happened because #6314 was merged after
the initial release branch was cut.
Fixes#6638
PostgreSQL 15 exposes WL_SOCKET_CLOSED in WaitEventSet API, which is
useful for detecting closed remote sockets. In this patch, we use this
new event and try to detect closed remote sockets in the executor.
When a closed socket is detected, the executor now has the ability to
retry the connection establishment. Note that, the executor can retry
connection establishments only for the connection that has not been
used. Basically, this patch is mostly useful for preventing the executor
to fail if a cached connection is closed because of the worker node
restart (or worker failover).
In other words, the executor cannot retry connection establishment if we
are in a distributed transaction AND any command has been sent over the
connection. That requires more sophisticated retry mechanisms. For now,
fixing the above use case is enough.
Fixes#5538
Earlier discussions: #5908, #6259 and #6283
### Summary of the current approach regards to earlier trials
As noted, we explored some alternatives before getting into this.
https://github.com/citusdata/citus/pull/6283 is simple, but lacks an
important property. We should be checking for `WL_SOCKET_CLOSED`
_before_ sending anything over the wire. Otherwise, it becomes very
tricky to understand which connection is actually safe to retry. For
example, in the current patch, we can safely check
`transaction->transactionState == REMOTE_TRANS_NOT_STARTED` before
restarting a connection.
#6259 does what we intent here (e.g., check for sending any command).
However, as @marcocitus noted, it is very tricky to handle
`WaitEventSets` in multiple places. And, the executor is designed such
that it reacts to the events. So, adding anything `pre-executor` seemed
too ugly.
In the end, I converged into this patch. This patch relies on the
simplicity of #6283 and also does a very limited handling of
`WaitEventSets`, just for our purpose. Just before we add any connection
to the execution, we check if the remote session has already closed.
With that, we do a brief interaction of multiple wait event processing,
but with different purposes. The new wait event processing we added does
not even consider cancellations. We let that handled by the main event
processing loop.
Co-authored-by: Marco Slot <marco.slot@gmail.com>
In Split, Logical replication logic and ShardCleaner we call
`SendCommandListToWorkerOutsideTransaction` and
`SendOptionalCommandListToWorkerOutsideTransaction` frequently. This
opens new connection for each of those calls, even though we already
have a perfectly good connection lying around.
This PR adds two new APIs
`SendCommandListToWorkerOutsideTransactionWithConnection` and
`SendOptionalCommandListToWorkerOutsideTransactionWithConnection` that
allow sending a list of queries in a transaction over an existing
connection. We also update the callers (Split, ShardCleaner, Logical
Replication) to use these new APIs instead.
Co-authored-by: Nitish Upreti <niupre@microsoft.com>
Co-authored-by: Onder Kalaci <onderkalaci@gmail.com>
With this commit, rebalancer backends are identified by application_name = citus_rebalancer
and the regular internal backends are identified by application_name = citus_internal
In addition to starting a new transaction, we also need to tell other
backends --including the ones spawned for connections opened to
localhost to build indexes on shards of this relation-- that concurrent
index builds can safely ignore us.
Normally, DefineIndex() only does that if index doesn't have any
predicates (i.e.: where clause) and no index expressions at all.
However, now that we already called standard process utility, index
build on the shell table is finished anyway.
The reason behind doing so is that we cannot guarantee not grabbing any
snapshots via adaptive executor, and the backends creating indexes on
local shards (if any) might block on waiting for current xact of the
current backend to finish, which would cause self deadlocks that are not
detectable.
With https://github.com/citusdata/citus/pull/5493 we introduced
metadata specific connections.
With this connection we guarantee that there is a single metadata connection.
But note that this connection can be used for any other operation.
In other words, this connection is not only reserved for metadata
operations.
However, as https://github.com/citusdata/citus-enterprise/issues/715 showed
us that the logic has a flaw. We allowed ineligible connections to be
picked as metadata connections: such as exclusively claimed connections
or not fully initialized connections.
With this commit, we make sure that we only consider eligable connections
for metadata operations.
With this commit, we make sure to use a dedicated connection per
node for all the metadata operations within the same transaction.
This is needed because the same metadata (e.g., metadata includes
the distributed table on the workers) can be modified accross
multiple connections.
With this connection we guarantee that there is a single metadata connection.
But note that this connection can be used for any other operation.
In other words, this connection is not only reserved for metadata
operations.
ConnParams(AuthInfo and PoolInfo) gets a snapshot, which will block the
remote connectinos to localhost. And the release of snapshot will be
blocked by the snapshot. This leads to a deadlock.
We warm up the conn params hash before starting a new transaction so
that the entries will already be there when we start a new transaction.
Hence GetConnParams will not get a snapshot.
If MemoryContextAlloc errors out -e.g. during an OOM-, ConnectionHashEntry->connections
stays as NULL.
With this commit, we add isValid flag to ConnectionHashEntry that should be set to true
right after we allocate & initialize ConnectionHashEntry->connections list properly, and we
check it before accesing to ConnectionHashEntry->connections.
With this patch, we introduce `locally_reserved_shared_connections.c/h` files
which are responsible for reserving some space in shared memory counters
upfront.
We sometimes need to reserve connections, but not necessarily
establish them. For example:
- COPY command should reserve connections as it cannot know which
connections it needs in which order. COPY establishes connections
as any input data hits the workers. For example, for router COPY
command, it only establishes 1 connection.
As discussed here (https://github.com/citusdata/citus/pull/3849#pullrequestreview-431792473),
COPY needs to reserve connections up-front, otherwise we can end
up with resource starvation/un-detected deadlocks.
With adaptive connection management, we might have some connections
which are not fully initialized. Those connections should not be
qualified as available.
The previous default was 5 seconds, and we change it to 30 seconds.
The main motivation for this is that for busy clusters, 5 seconds
can be too aggressive. Especially with connection throttling, the servers
might be kept busy for a really long time, and users may see the
connection errors more frequently.
We've done some sanity checks, for really quick queries (like
`SELECT count(*) from table`), 30 seconds is a decent value even
if users execute 300 distributed queries on the coordinator. We've
verified this on Hyperscale(Citus).
With this commit, we're introducing a new infrastructure to throttle
connections to the worker nodes. This infrastructure is useful for
multi-shard queries, router queries are have not been affected by this.
The goal is to prevent establishing more than citus.max_shared_pool_size
number of connections per worker node in total, across sessions.
To do that, we've introduced a new connection flag OPTIONAL_CONNECTION.
The idea is that some connections are optional such as the second
(and further connections) for the adaptive executor. A single connection
is enough to finish the distributed execution, the others are useful to
execute the query faster. Thus, they can be consider as optional connections.
When an optional connection is not allowed to the adaptive executor, it
simply skips it and continues the execution with the already established
connections. However, it'll keep retrying to establish optional
connections, in case some slots are open again.
We don't need any side channel connections. That is actually
problematic in the sense that it creates extra connections.
Say, citus.max_adaptive_executor_pool_size equals to 1, Citus
ends up using one extra connection for the intermediate results.
Thus, not obeying citus.max_adaptive_executor_pool_size.
In this PR, we remove the following entities from the codebase
to allow further commits to implement not requiring extra connection
for the intermediate results:
- The connection flag REQUIRE_SIDECHANNEL
- The function GivePurposeToConnection
- The ConnectionPurpose struct and related fields
ivyazmitinov
Jelte Fennema-Nio
LightDB Enterprise Postgres
Nils Dijk
zhjwpku
Naisila Puka
aykutbozkurt
rajeshkt78
Jelte Fennema
Önder Kalacı
Sameer Awasekar
Marco Slot
Halil Ozan Akgul
Teja Mupparti
Onur Tirtir
Philip Dubé
SaitTalhaNisanci
Philip Dubé