The issue in question is caused when rebalance / replication call `FullShardPlacementList` which returns all shard placements (including those in disabled nodes with `citus_disable_node`). Eventually, `FindFillStateForPlacement` looks for the state across active workers and fails to find a state for the placements which are in the disabled workers causing a seg fault shortly after.
Approach:
* `ActivePlacementHash` was not using the status of the shard placement's node to determine if the node it is active. Initially, I just fixed that.
* Additionally, I refactored the code which handles active shards in replication / rebalance to:
* use a single function to determine if a shard placement is active.
* do the shard active shard filtering before calling `RebalancePlacementUpdates` and `ReplicationPlacementUpdates`, so test methods like `shard_placement_rebalance_array` and `shard_placement_replication_array` which have different shard placement active requirements can do their own filtering while using the same rebalance / replicate logic that `rebalance_table_shards` and `replicate_table_shards` use.
Fix#5664
#5685 introduced the resolution of dependencies for indices. This missed support for indices on partitioned tables. This change adds support for partitioned indices to the dependency resolution code.
CREATE FUNCTION command together with it's dependencies.
If the function depends on any nondistributable object,
function will be created only locally. Parameterless
version of create_distributed_function becomes obsolete
with this change, it will deprecated from the code with a subsequent PR.
* When a worker tried to create a collation which had a dependency in the same worker node,
it would cause a deadlock, now it throws the correct "not a coordinator" error.
DESCRIPTION: Implement TEXT SEARCH CONFIGURATION propagation
The change adds support to Citus for propagating TEXT SEARCH CONFIGURATION objects. TSConfig objects cannot always be created in one create statement, and instead require a create statement followed by many alter statements to get turned into the object they should represent.
To support this we add functionality to the worker to create or replace objects based on a list of statements. When the lists of the local object and the remote object correspond 1:1 we skip the creation of the object and simply mark it distributed. This is especially important for TSConfig objects as initdb pre-populates databases with a dozen configurations (for many different languages).
When the user creates a new TSConfig based on the copy of an existing configuration there is no direct link to the object copied from. Since there is no link we can't simply rely on propagating the dependencies to the worker and send a qualified
DESCRIPTION: Prevent Citus table functions from being called on shards
The operations that guard against using shards are:
* Create Local Table
* Create distributed table (which affects reference table creation as well).
* I used a `ErrorIfRaltionIsKnownShard` instead of `ErrorIfIllegallyChangingKnownShard`.
`ErrorIfIllegallyChangingKnownShard` allows the operation if `citus.enable_manual_changes_to_shards`,
but I am not sure if it ever makes sense to create a distributed, reference, or citus local table out of a shard.
I tried to go over the code to identify other UDF-s where shards could be illegaly changed, but I could not find any other.
My knowledge of the codebase is not solid enough for me to say for sure.
Fixes#5610
With https://github.com/citusdata/citus/pull/5657, Citus uses
a fixed application_name while connecting to remote nodes
for internal purposes.
It means that we cannot allow users to override it via
citus.node_conninfo.
Implement #5649
Allow create_distributed_function() on functions owned by extensions
1) Only update pg_dist_object, and do not propagate CREATE FUNCTION.
2) Ensure corresponding extension is in pg_dist_object.
3) Verify if dependencies exist on the function they should resolve to the extension.
4) Impact on node-scaling: We build a list of ddl commands based on all objects in
pg_dist_object. We need to omit the ddl's for the extension-function, as it
will get propagated by the virtue of the extension creation.
5) Extra checks for functions coming from extensions, to not propagate changes
via ddl commands, even though the function is marked as distributed in pg_dist_object
If the expression is simple, such as, SELECT function() or PEFORM function()
in PL/PgSQL code, PL engine does a simple expression evaluation which can't
interpret the Citus CustomScan Node. Code checks for simple expressions when
executing an UDF but missed the DO-Block scenario, this commit fixes it.
Removed dependency for EnsureTableOwner. Also removed pg_fini() and columnar_tableam_finish() Still need to remove CheckCitusVersion dependency to make Columnar_tableam.h dependency free from Citus.
Previously, we were wrapping targetlist nodes with Vars that reference
to the result of the worker query, if the node itself is not `Const` or
not a `Param`. Indeed, we should not do that unless the node itself is
a `Var` node or contains a `Var` within it (e.g.: `OpExpr(Var(column_a) > 2)`).
Otherwise, when worker query returns empty result set, then combine
query exec would crash since the `Var` would be pointing to an empty
tuple slot, which is not desirable for the node-executor methods.
Replaces citus.enable_object_propagation with citus.enable_metadata_sync
Also, within Citus 11 release cycle, we added citus.enable_metadata_sync_by_default,
that is also replaced with citus.enable_metadata_sync.
In essence, when citus.enable_metadata_sync is set to true, all the objects
and the metadata is send to the remote node.
We strongly advice that the users never changes the value of
this GUC.
With this commit, rebalancer backends are identified by application_name = citus_rebalancer
and the regular internal backends are identified by application_name = citus_internal
With this commit we've started to propagate sequences and shell
tables within the object dependency resolution. So, ensuring any
dependencies for any object will consider shell tables and sequences
as well. Separate logics for both shell tables and sequences have
been removed.
Since both shell tables and sequences logic were implemented as a
part of the metadata handling before that logic, we were propagating
them while syncing table metadata. With this commit we've divided
metadata (which means anything except shards thereafter) syncing
logic into multiple parts and implemented it either as a part of
ActivateNode. You can check the functions called in ActivateNode
to check definition of different metadata.
Definitions of start_metadata_sync_to_node and citus_activate_node
have also been updated. citus_activate_node will basically create
an active node with all metadata and reference table shards.
start_metadata_sync_to_node will be same with citus_activate_node
except replicating reference tables. stop_metadata_sync_to_node
will remove all the metadata. All of those UDFs need to be called
by superuser.
With https://github.com/citusdata/citus/pull/2780, we allow
COPY to use any number of connections that the executor used
in a tx block.
Meaning that, while COPYing data to the shards, create_distributed_table
could allow sequential mode.
We fall back to local execution if we cannot establish any more
connections to local node. However, we should not do that for the
commands that we don't know how to execute locally (or we know we
shouldn't execute locally). To fix that, we take localExecutionSupported
take into account in CanFailoverPlacementExecutionToLocalExecution too.
Moreover, we also prompt a more accurate hint message to inform user
about whether the execution is failed because local execution is
disabled by them, or because local execution wasn't possible for given
command.
BEGIN/COMMIT transaction block or in a UDF calling another UDF.
(2) Prohibit/Limit the delegated function not to do a 2PC (or any work on a
remote connection).
(3) Have a safety net to ensure the (2) i.e. we should block the connections
from the delegated procedure or make sure that no 2PC happens on the node.
(4) Such delegated functions are restricted to use only the distributed argument
value.
Note: To limit the scope of the project we are considering only Functions(not
procedures) for the initial work.
DESCRIPTION: Introduce a new flag "force_delegation" in create_distributed_function(),
which will allow a function to be delegated in an explicit transaction block.
Fixes#3265
Once the function is delegated to the worker, on that node during the planning
distributed_planner()
TryToDelegateFunctionCall()
CheckDelegatedFunctionExecution()
EnableInForceDelegatedFuncExecution()
Save the distribution argument (Constant)
ExecutorStart()
CitusBeginScan()
IsShardKeyValueAllowed()
Ensure to not use non-distribution argument.
ExecutorRun()
AdaptiveExecutor()
StartDistributedExecution()
EnsureNoRemoteExecutionFromWorkers()
Ensure all the shards are local to the node in the remoteTaskList.
NonPushableInsertSelectExecScan()
InitializeCopyShardState()
EnsureNoRemoteExecutionFromWorkers()
Ensure all the shards are local to the node in the placementList.
This also fixes a minor issue: Properly handle expressions+parameters in distribution arguments
* Removed distributed dependency in columnar_metadata.c
* Changed columnar_debug.c so that it no longer needed distributed/tuplestore and made it return a record instead of a tuplestore
* removed distributed/commands.h dependency
* Made columnar_tableam.c dependency-free
* Fixed spacing for columnar_store_memory_stats function
* indentation fix
* fixed test failures
* Require superuser while activating a node
With this change, we require ActiveNode() (hence citus_add_node(),
citus_activate_node()) explicitly require for a superuser.
Before this commit, these functions were designed to work with
non-superuser roles with the relevent GRANTs given.
However, that is not a widely used way for calling the functions
above.
Due to possibility of non-super user calling the UDFs, they were
designed in a way that some commands were using some additional
short-lived superuser connections. That is:
(a) breaking transactional behavior (e.g., ROLLBACK
wouldn't fully rollback the whole transaction)
(b) Making it very complicated to reason about which
parts of the node activation goes over which connections,
and becoming vulnerable to deadlocks / visibility issues.
We prefer the background daemon to only sync node metadata. That's
why we move placement metadata changes from disable node to
activate node. With that, we can make sure that disable node
only changes node metadata, whereas activate node syncs all
the metadata changes. In essence, we already expect all
nodes to be up when a node is activated. So, this does not change
the behavior much.
Dropping sequences means we need to recreate
and hence losing the sequence.
With this commit, we keep the existing sequences
such that resyncing wouldn't drop the sequence.
We do that by breaking the dependency of the sequence
from the table.
Before this commit, Citus was triggering metadata syncing
in the background when a function is distributed. However,
with Citus 11, we expect all clusters to have metadata synced
enabled. So, we do not expect any nodes not to have the metadata.
This change:
(a) pro: simplifies the code and opens up possibilities
to simplify futher by reducing the scope of
bg worker to only sync node metadata
(b) pro: explicitly asks users to sync the metadata such that
any unforseen impact can be easily detected
(c) con: For distributed functions without distribution
argument, we do not necessarily require the metadata
sycned. However, for completeness and simplicity, we
do so.
With Citus 11, the default behavior is to sync the metadata.
However, partitioned tables created pre-Citus 11 might have
index names that are not compatiable with metadata syncing.
See https://github.com/citusdata/citus/issues/4962 for the
details.
With this commit, we record the existence of partitioned tables
such that we can fix it later if any exists.
With this commit, fix_partition_shard_index_names()
works significantly faster.
For example,
32 shards, 365 partitions, 5 indexes drop from ~120 seconds to ~44 seconds
32 shards, 1095 partitions, 5 indexes drop from ~600 seconds to ~265 seconds
`queryStringList` can be really long, because it may contain #partitions * #indexes entries.
Before this change, we were actually going through the executor where each command
in the query string triggers 1 round trip per entry in queryStringList.
The aim of this commit is to avoid the round-trips by creating a single query string.
I first simply tried sending `q1;q2;..;qn` . However, the executor is designed to
handle `q1;q2;..;qn` type of query executions via the infrastructure mentioned
above (e.g., by tracking the query indexes in the list and doing 1 statement
per round trip).
One another option could have been to change the executor such that only track
the query index when `queryStringList` is provided not with queryString
including multiple `;`s . That is (a) more work (b) could cause weird edge
cases with failure handling (c) felt like coding a special case in to the executor
(cherry picked from commit 90928cfd74)
Fix function signature generation
Fix comment typo
Add test for worker_create_or_replace_object
Add test for recreating distributed functions with OUT/TABLE params
Add test for recreating distributed function that returns setof int
Fix test output
Fix comment
Simply applies
```SQL
SELECT textlike(command, citus.grep_remote_commands)
```
And, if returns true, the command is logged. Else, the log is ignored.
When citus.grep_remote_commands is empty string, all commands are
logged.
This UDF coordinates connectivity checks accross the whole cluster.
This UDF gets the list of active readable nodes in the cluster, and
coordinates all connectivity checks in sequential order.
The algorithm is:
for sourceNode in activeReadableWorkerList:
c = connectToNode(sourceNode)
for targetNode in activeReadableWorkerList:
result = c.execute(
"SELECT citus_check_connection_to_node(targetNode.name,
targetNode.port")
emit sourceNode.name,
sourceNode.port,
targetNode.name,
targetNode.port,
result
- result -> true -> connection attempt from source to target succeeded
- result -> false -> connection attempt from source to target failed
- result -> NULL -> connection attempt from the current node to source node failed
I suggest you use the following query to get an overview on the connectivity:
SELECT bool_and(COALESCE(result, false))
FROM citus_check_cluster_node_health();
Whenever this query returns false, there is a connectivity issue, check in detail.
Before that PR we were updating citus.pg_dist_object metadata, which keeps
the metadata related to objects on Citus, only on the coordinator node. In
order to allow using those object from worker nodes (or erroring out with
proper error message) we've started to propagate that metedata to worker
nodes as well.
citus_check_connection_to_node runs a simple query on a remote node and
reports whether this attempt was successful.
This UDF will be used to make sure each worker node can connect to all
the worker nodes in the cluster.
parameters:
nodename: required
nodeport: optional (default: 5432)
return value:
boolean success
As of master branch, Citus does all the modifications to replicated tables
(e.g., reference tables and distributed tables with replication factor > 1),
via 2PC and avoids any shardstate=3. As a side-effect of those changes,
handling node failures for replicated tables change.
With this PR, when one (or multiple) node failures happen, the users would
see query errors on modifications. If the problem is intermitant, that's OK,
once the node failure(s) recover by themselves, the modification queries would
succeed. If the node failure(s) are permenant, the users should call
`SELECT citus_disable_node(...)` to disable the node. As soon as the node is
disabled, modification would start to succeed. However, now the old node gets
behind. It means that, when the node is up again, the placements should be
re-created on the node. First, use `SELECT citus_activate_node()`. Then, use
`SELECT replicate_table_shards(...)` to replicate the missing placements on
the re-activated node.
The checks for preventing to remove a node are very much reference
table centric. We are soon going to add the same checks for replicated
tables. So, make the checks generic such that:
(a) replicated tables fit naturally
(b) we can the same checks in `citus_disable_node`.
Before this commit, we acquire the metadata locks on the reference
tables while removing/disabling a node on all the MX nodes.
Although it has some marginal benefits, such as a concurrent
modification during remove/disable node blocks, instead of erroring
out, the drawbacks seems worse. Both citus_remove_node and citus_disable_node
are not tolerant to multiple node failures.
With this commit, we relax the locks. The implication is that while
a node is removed/disabled, users might see query errors. On the
other hand, this change becomes removing/disabling nodes more
tolerant to multiple node failures.
When refactoring storage layer in #4907, we deleted the code that allows
overwriting a disk page previously written but not known by metadata.
Readers can see the change that introduced the code allows doing so in
commit a8da9acc63.
The reasoning was that; as of 10.2, we started aligning page
reservations (`AlignReservation`) for subsequent writes right after
allocating pages from disk. That means, even if writer transaction
fails, subsequent writes are guaranteed to allocate a new page and write
to there. For this reason, attempting to write to a page allocated
before is not possible for a columnar table that user created when using
v10.2.x.
However, since the older versions of columnar doesn't do that, following
example scenario can still result in writing to such disk page, even if
user now upgraded to v10.2.x. This is because, when upgrading storage to
2.0 (`ColumnarStorageUpdateIfNeeded`), we calculate `reservedOffset` of
the metapage based on the highest used address known by stripe
metadata (`GetHighestUsedAddressAndId`). However, stripe metadata
doesn't have entries for aborted writes. As a result, highest used
address would be computed by ignoring pages that are allocated but not
used.
- User attempts writing to columnar table on Citus v10.0x/v10.1x.
- Write operation fails for some reason.
- User upgrades Citus to v10.2.x.
- When attempting to write to same columnar table, they hit to "attempt
to write columnar data .." error since write operation done in the
older version of columnar already allocated that page, and now we are
overwriting it.
For this reason, with this commit, we re-do the change done in
a8da9acc63.
And for the reasons given above, it wasn't possible to add a test for
this commit via usual code-paths. For this reason, added a UDF only for
testing purposes so that we can reproduce the exact scenario in our
regression test suite.
During pg upgrades, we have seen that it is not guaranteed that a
columnar table will be created after metadata objects got created.
Prior to changes done in this commit, we had such a dependency
relationship in `pg_depend`:
```
columnar_table ----> columnarAM ----> citus extension
^ ^
| |
columnar.storage_id_seq -------------------- |
|
columnar.stripe -------------------------------
```
Since `pg_upgrade` just knows to follow topological sort of the objects
when creating database dump, above dependency graph doesn't imply that
`columnar_table` should be created before metadata objects such as
`columnar.storage_id_seq` and `columnar.stripe` are created.
For this reason, with this commit we add new records to `pg_depend` to
make columnarAM depending on all rel objects living in `columnar`
schema. That way, `pg_upgrade` will know it needs to create those before
creating `columnarAM`, and similarly, before creating any tables using
`columnarAM`.
Note that in addition to inserting those records via installation script,
we also do the same in `citus_finish_pg_upgrade()`. This is because,
`pg_upgrade` rebuilds catalog tables in the new cluster and that means,
we must insert them in the new cluster too.
- [x] Add some more regression test coverage
- [x] Make sure returning works fine in case of
local execution + remote execution
(task->partiallyLocalOrRemote works as expected, already added tests)
- [x] Implement locking properly (and add isolation tests)
- [x] We do #shardcount round-trips on `SerializeNonCommutativeWrites`.
We made it a single round-trip.
- [x] Acquire locks for subselects on the workers & add isolation tests
- [x] Add a GUC to prevent modification from the workers, hence increase the
coordinator-only throughput
- The performance slightly drops (~%15), unless
`citus.allow_modifications_from_workers_to_replicated_tables`
is set to false
Drop extension might cascade to columnar.options before dropping a
columnar table. In that case, we were getting below error when opening
columnar.options to delete records for the columnar table that we are
about to drop.: "ERROR: could not open relation with OID 0".
I somehow reproduced this bug easily when upgrading pg, that is why
adding added the test to after_pg_upgrade_schedule.
We recently introduced a set of patches to 10.2, and introduced 10.2-4
migration version. This migration version only resides on `release-10.2`
branch, and is missing on our default branch. This creates a problem
because we do not have a valid migration path from 10.2 to latest 11.0.
To remedy this issue, I copied the relevant migration files from
`release-10.2` branch, and renamed some of our migration files on
default branch to make sure we have a linear upgrade path.
Before this commit, we required the user to be owner of the shard/table
in order to call lock_shard_resources.
However, that is too restrictive. We can have users with GRANTS
to the table who are not owners of the tables/shards.
With this commit, we allow such patterns.
This PR is fixing 2 separate issues related to the local run of citus upgrade tests.
d3e7c825ab fixes the issue that, with our new testing infrastructure, we moved/renamed some of existing folders. This created a problem for local runs of citus upgrade tests since some paths were sensitive to such changes. This commit tries to make it more generic so that this issue is less likely to happen in the future, while also fixing the current issue.
93de6b60c3 we are fixing an issue that a new environment variable was added for citus upgrade tests, which is defined in the CI. 0cb51f8c37/.circleci/config.yml (L294)
This environment variable wasn't set in our local runs hence it would create problems. Instead of defining this environment variable in the local run, we change the citus_upgrade run command to use an existing env variable, which is now also set in the CI.
We fixed some crashes a while back that would only occur in cases where
the value of a distribution column would have result in a high or a very
low hash value. This adds a regression test for those crashes.
This test starts passing because of PR #4508, to be precise commit:
24e60b44a1
When I undo that commit this newly added test starts failing. This adds
this test to make sure we don't regress on this again.
There is a vulnerability in mitmproxy with the version we are using.
It would be hard to exploit anything with regards to the artifacts we ship as its only used in our test suite. Still its good hygiene to _not_ use software with known vulnerabilities.
This PR updates the version of python, mitmproxy and the crypto libraries used.
The latest version of mitmproxy for python 3.6 is not patched, hence the upgrade of python.
For our CI images this cascades into upgrading debian as well :)
For CI we bake these versions in our images so we need to update them as well.
Changes to the CI images: https://github.com/citusdata/the-process/pull/65
In the past, we allowed users to manually switch to 1PC
(e.g., one phase commit). However, with this commit, we
don't. All multi-shard modifications are done via 2PC.
With Citus 9.0, we introduced `citus.single_shard_commit_protocol` which
defaults to 2PC.
With this commit, we prevent any user to set it to 1PC and drop support
for `citus.single_shard_commit_protocol`.
Although this might add some overhead for users, it is already the default
behaviour (so less likely) and marking placements as INVALID is much
worse.
- citus_get_all_dependencies_for_object: emulate what Citus
would qualify as
dependency when adding
a new node
- citus_get_dependencies_for_object: emulate what Citus would qualify
as dependency when creating an
object
Example use:
```SQL
-- find all the depedencies of table test
SELECT
pg_identify_object(t.classid, t.objid, t.objsubid)
FROM
(SELECT * FROM pg_get_object_address('table', '{test}', '{}')) as addr
JOIN LATERAL
citus_get_all_dependencies_for_object(addr.classid, addr.objid, addr.objsubid) as t(classid oid, objid oid, objsubid int)
ON TRUE
ORDER BY 1;
```
To run tests in parallel use:
```bash
make check-arbitrary-configs parallel=4
```
To run tests sequentially use:
```bash
make check-arbitrary-configs parallel=1
```
To run only some configs:
```bash
make check-arbitrary-base CONFIGS=CitusSingleNodeClusterConfig,CitusSmallSharedPoolSizeConfig
```
To run only some test files with some config:
```bash
make check-arbitrary-base CONFIGS=CitusSingleNodeClusterConfig EXTRA_TESTS=dropped_columns_1
```
To get a deterministic run, you can give the random's seed:
```bash
make check-arbitrary-configs parallel=4 seed=12312
```
The `seed` will be in the output of the run.
In our regular regression tests, we can see all the details about either planning or execution but this means
we need to run the same query under different configs/cluster setups again and again, which is not really maintanable.
When we don't care about the internals of how planning/execution is done but the correctness, especially with different configs
this infrastructure can be used.
With `check-arbitrary-configs` target, the following happens:
- a bunch of configs are loaded, which are defined in `config.py`. These configs have different settings such as different shard count, different citus settings, postgres settings, worker amount, or different metadata.
- For each config, a separate data directory is created for tests in `tmp_citus_test` with the config's name.
- For each config, `create_schedule` is run on the coordinator to setup the necessary tables.
- For each config, `sql_schedule` is run. `sql_schedule` is run on the coordinator if it is a non-mx cluster. And if it is mx, it is either run on the coordinator or a random worker.
- Tests results are checked if they match with the expected.
When tests results don't match, you can see the regression diffs in a config's datadir, such as `tmp_citus_tests/dataCitusSingleNodeClusterConfig`.
We also have a PostgresConfig which runs all the test suite with Postgres.
By default configs use regular user, but we have a config to run as a superuser as well.
So the infrastructure tests:
- Postgres vs Citus
- Mx vs Non-Mx
- Superuser vs regular user
- Arbitrary Citus configs
When you want to add a new test, you can add the create statements to `create_schedule` and add the sql queries to `sql_schedule`.
If you are adding Citus UDFs that should be a NO-OP for Postgres, make sure to override the UDFs in `postgres.sql`.
You can add your new config to `config.py`. Make sure to extend either `CitusDefaultClusterConfig` or `CitusMXBaseClusterConfig`.
On the CI, upon a failure, all logfiles will be uploaded as artifacts, so you can check the artifacts tab.
All the regressions will be shown as part of the job on CI.
In your local, you can check the regression diffs in config's datadirs as in `tmp_citus_tests/dataCitusSingleNodeClusterConfig`.
Add/fix tests
Fix creating partitions
Add test for mx - partition creating case
Enable cascading to partitioned tables
Fix mx partition adding test
Fix cascading through fkeys
Style
Disable converting with non-inherited fkeys
Fix detach bug
Early return in case of cascade & Add tests
Style
Fix undistribute_table bug & Fix test outputs
Remove RemovePartitionRelationIds
Test with undistribute_table
Add test for mx+convert+undistribute
Remove redundant usage of CreatePartitionedCitusLocalTable
Add some comments
Introduce bulk functions for generating attach/detach partition commands
Fix: Convert partitioned tables after adding fkey
Change the error message for partitions
Introduce function ErrorIfPartitionTableAddedToMetadata
Polish attach/detach command generation functions
Use time_partitions for testing
Move mx tests to citus_local_tables_mx
Add new partitioned table to cascade test
Add test with time series management UDFs
Fix test output
Fix: Assertion fail on relation access tracking
Style
Refactor creating partitioned citus local tables
Remove CreatePartitionedCitusLocalTable
Style
Error out if converting multi-level table
Revert some old tests
Error out adding partitioned partition
Polish
Polish/address
Fix create table partition of case
Use CascadeOperationForRelationIdList if no cascade needed
Fix create partition bug
Revert / Add new tests to mx
Style
Fix dropping fkey bug
Add test with IF NOT EXISTS
Convert to CLT when doing ATTACH PARTITION
Add comments
Add more tests with time series management
Edit the error message for converting the child
Use OR instead of AND in ErrorIfUnsupportedAlterTableStmt
Edit/improve tests
Disable ddl prop when dropping default column definitions
Disable/enable ddl prop just before/after the command
Add comment
Add sequence test
Add trigger test
Remove NeedCascadeViaForeignKeys
Add one more insert to sequence test
Add comment
Style
Fix test output shard ids
Update comments
Disable creating fkey on partitions
Move partition check to CreateCitusLocalTable
Add comment
Add check for attachingmulti-level partition
Add test for pg_constraint
Check pg_dist_partition in tests
Add test inserting on the worker
* Add udf to include shardId in broken partition shard index names
* Address reviews: rename index such that operations can be done on it
* More comprehensive index tests
* Final touches and formatting
A write operation might trigger index deletion if index already had
dead entries for the key we are about to insert.
There are two ways of index deletion:
a) simple deletion
b) bottom-up deletion (>= pg14)
Since columnar_index_fetch_tuple never sets all_dead to true,
columnarAM doesn't ever expect to receive simple deletion requests
(columnar_index_delete_tuples) as we don't mark any index entries
as dead.
However, since columnarAM doesn't delete any dead entries via simple
deletion, postgres might ask for a more comprehensive deletion
(i.e.: bottom-up) at some point when pg >= 14.
So with this commit, we start gracefully ignoring bottom-up deletion
requests made to columnar_index_delete_tuples.
Given that users can anyway "VACUUM FULL" their columnar tables,
we don't see any problem in ignoring deletion requests.
* Make (columnar.stripe) first_row_number index a unique constraint
Since stripe_first_row_number_idx is required to scan a columnar
table, we need to make sure that it is created before doing anything
with columnar tables during pg upgrades.
However, a plain btree index is not a dependency of a table, so
pg_upgrade cannot guarantee that stripe_first_row_number_idx gets
created when creating columnar.stripe, unless we make it a unique
"constraint".
To do that, drop stripe_first_row_number_idx and create a unique
constraint with the same name to keep the code change at minimum.
* Add more pg upgrade tests for columnar
* Fix a logic error in uprade_columnar_after test
Co-authored-by: Onur Tirtir <onurcantirtir@gmail.com>
Considering all code-paths that we might interact with a columnar table,
add `CheckCitusVersion` calls to tableAM callbacks:
- initializing table scan (`columnar_beginscan` & `columnar_index_fetch_begin`)
- setting a new filenode for a relation (storage initializiation or a table rewrite)
- truncating the storage
- inserting tuple (single and multi)
Also add `CheckCitusVersion` call to:
- drop hook (`ColumnarTableDropHook`)
- `alter_columnar_table_set` & `alter_columnar_table_reset` UDFs
* Columnar: separate plain and exec quals.
Make a clear separation between plain quals, which contain constants
or extern params; and exec quals, which contain exec params and can't
be evaluated until a rescan.
Fixes#5258.
* more vanilla tests
Co-authored-by: Onur Tirtir <onurcantirtir@gmail.com>
When performing a partition-wise join, the planner will adjust paths
parameterized by the parent rel to instead parameterize by the child
rel directly. When this reparameterization happens, we also need to
adjust the join quals to reference the child rather than the parent.
Fixes#5257.
Not flush pending writes if given tid belongs to a "flushed" or
"aborted" stripe write, or to an "in-progress" stripe write of
another backend.
That way, we would reduce the cases where we flush single-tuple
stripes during index scan.
To do that, we follow below steps for index look-up's:
- Do not flush any pending writes and do stripe metadata look-up for
given tid.
If tuple with tid is found, then no need to do another look-up
since we already found the tuple without needing to flush pending
writes.
- If tuple is not found without flushing pending writes, then we have two
scenarios:
- If given tid belongs to a pending write of my backend, then do stripe
metadata look-up for given tid. But this time first **flush any pending
writes**.
- Otherwise, just return false from `index_fetch_tuple` since flushing
pending writes wouldn't help.
With 5825c44d5f, we made the changes to
skip aborted writes when scanning a columnar table.
However, looks like we forgot to handle such cases for the very first
call made to columnar_getnextslot. That means, that commit only
considered the intermediate stripe read operations.
However, functions called by columnar_getnextslot to find first stripe
to read (ColumnarBeginRead & ColumnarRescan) were not caring about
those aborted writes.
To fix that, we teach AdvanceStripeRead to find the very first stripe
to read, and then start using it where were blindly calling
FindNextStripeByRowNumber.
Gledis Zeneli
Marco Slot
Nils Dijk
Teja Mupparti
Halil Ozan Akgul
Ahmet Gedemenli
yxu2162
Burak Velioglu
gledis69
Onder Kalaci
Ying Xu
Onur Tirtir
Önder Kalacı
Hanefi Onaldi
naisila
Sait Talha Nisanci
Jelte Fennema
Philip Dubé
Teja Mupparti
Naisila Puka
jeff-davis