When using `citus.replicate_reference_tables_on_activate = off`,
reference tables need to be replicated later. This can be done using the
`replicate_reference_tables()` UDF. However, this function only allowed
blocking replication. This changes the function to default to logical
replication instead, and allows choosing any of our existing shard
transfer modes.
DESCRIPTION: Use faster custom copy logic for non-blocking shard moves
Non-blocking shard moves consist of two main phases:
1. Initial data copy
2. Catchup phase
This changes the first of these phases significantly. Previously we used the
copy logic provided by postgres subscriptions. This meant we didn't have
to implement it ourselves, but it came with the downside of little control.
When implementing shard splits we needed more control to even make it
work, so we implemented our own logic for copying data between nodes.
This PR starts using that logic for non-blocking shard moves. Doing so
has four main advantages:
1. It uses COPY in binary format when possible, which is cheaper to encode
and decode. Furthermore it very often results in less data that needs to
be sent over the network.
2. It allows us to create the primary key (or other replica identity) after doing
the initial data copy. This should give some speed up over the total run,
because creating an index is bulk is much faster than incrementally building it.
3. It doesn't require a replication slot per parallel copy. Increasing the maximum
number of replication slots uses resources in postgres, even if they are not used.
So reducing the number of replication slots that shard moves need is nice.
4. Logical replication table_sync workers are slow to start up, so if lots of shards
need to be copied that can make it quite slow. This can happen easily when
combining Postgres partitioning with Citus.
The new shard copy code that was created for shard splits has some
advantages over the old shard copy code. The old code was using
worker_append_table_to_shard, which wrote to disk twice. And it also
didn't use binary copy when that was possible. Both of these issues
were fixed in the new copy code. This PR starts using this new copy
logic also for shard moves, not just for shard splits.
On my local machine I created a single shard table like this.
```sql
set citus.shard_count = 1;
create table t(id bigint, a bigint);
select create_distributed_table('t', 'id');
INSERT into t(id, a) SELECT i, i from generate_series(1, 100000000) i;
```
I then turned `fsync` off to make sure I wasn't bottlenecked by disk.
Finally I moved this shard between nodes with `citus_move_shard_placement`
with `block_writes`.
Before this PR a move took ~127s, after this PR it took only ~38s. So for this
small test this resulted in spending ~70% less time.
And I also tried the same test for a table that contained large strings:
```sql
set citus.shard_count = 1;
create table t(id bigint, a bigint, content text);
select create_distributed_table('t', 'id');
INSERT into t(id, a, content) SELECT i, i, 'aunethautnehoautnheaotnuhetnohueoutnehotnuhetncouhaeohuaeochgrhgd.athbetndairgexdbuhaobulrhdbaetoausnetohuracehousncaoehuesousnaceohuenacouhancoexdaseohusnaetobuetnoduhasneouhaceohusnaoetcuhmsnaetohuacoeuhebtokteaoshetouhsanetouhaoug.lcuahesonuthaseauhcoerhuaoecuh.lg;rcydabsnetabuesabhenth' from generate_series(1, 20000000) i;
```
citus_locks combines the pg_locks views from all nodes and adds
global_pid, nodeid, and relation_name. The columns of citus_locks don't
change based on the Postgres version, however the pg_locks's columns do.
Postgres 14 added one more column to pg_locks (waitstart timestamptz).
citus_locks has the most expansive column set, including the newly added
column. If citus_locks is queried in a Postgres version where pg_locks
doesn't have some columns, the values for those columns in citus_locks
will be NULL
* Blocking split setup
* Add missing type
* Missing API from Metadata Sync
* Shard Split e2e code
* Worker Split Copy DestReceiver skeleton
* Basic destreceiver code
* worker_split_copy UDF
* UDF calling
* Split points are text
* Isolate Tenant and Split Shard Unification
* Fixing executor and misc
* Reindent code
* Fixing UDF definitions
* Hello World Local Copy works
* Remote copy hello world works
* Local and Remote binary test
* Fixing text local copy and adding tests
* Hello World shard split works
* Negative tests
* Blocking Split workflow works
* Refactor
* Bug fix
* Reindent
* Cleaning up and adding comments
* Basic test for shard split workflow
* ReIndent
* Circle CI integration
* Removing include causing circle-ci build failure
* Remove SplitCopyDestReceiver and use PartitionedResultDestReceiver
* Add support for citus.enable_binary_protocol
* Reindent
* Fix build break
* Update Test
* Cleanup on catch
* Addressing open comments
* Update downgrade script and quote schema/table in COPY statement
* Fix metadata sync issue. Update regression test
* Isolation test and bug fix
* Add Isolation test, fix foreign constraint deadlock issue
* Misc code review comments
* Test name needing to be quoted
* Refactor code from review comments
* Explaining shardGroupSplitIntervalListList
* Fix upgrade & downgrade
* Fix broken test
* Test fix Round 2
* Fixing bug and modifying test appropriately
* Fully qualify copy udf name. Run Reindent
* Address PR comments
* Fix null handling when creating AuxiliaryStructures
* Ensure local copy is triggered in tests
* Limit max shards that can be created with split
* Test failure fix
* Remove split_mode and use shard_transfer_mode instead'
* Fix test failure
* Fix test failure
* Fixing permission issue when splitting non-superuser owned tables
* Fix test expected output
* Remove extra space
* Fix test
* attempt to fix test
* Addressing Marco's PR comment
* Only clean shards created by workflow
* Remove from merge
* Update test
* Support upgrade and downgrade and separate columnar as citus_columnar extension
Co-authored-by: Yanwen Jin <yanwjin@microsoft.com>
Co-authored-by: Jeff Davis <jeff@j-davis.com>
This PR makes all of the features open source that were previously only
available in Citus Enterprise.
Features that this adds:
1. Non blocking shard moves/shard rebalancer
(`citus.logical_replication_timeout`)
2. Propagation of CREATE/DROP/ALTER ROLE statements
3. Propagation of GRANT statements
4. Propagation of CLUSTER statements
5. Propagation of ALTER DATABASE ... OWNER TO ...
6. Optimization for COPY when loading JSON to avoid double parsing of
the JSON object (`citus.skip_jsonb_validation_in_copy`)
7. Support for row level security
8. Support for `pg_dist_authinfo`, which allows storing different
authentication options for different users, e.g. you can store
passwords or certificates here.
9. Support for `pg_dist_poolinfo`, which allows using connection poolers
in between coordinator and workers
10. Tracking distributed query execution times using
citus_stat_statements (`citus.stat_statements_max`,
`citus.stat_statements_purge_interval`,
`citus.stat_statements_track`). This is disabled by default.
11. Blocking tenant_isolation
12. Support for `sslkey` and `sslcert` in `citus.node_conninfo`
It is often useful to be able to sync the metadata in parallel
across nodes.
Also citus_finalize_upgrade_to_citus11() uses
start_metadata_sync_to_primary_nodes() after this commit.
Note that this commit does not parallelize all pieces of node
activation or metadata syncing. Instead, it tries to parallelize
potenially large parts of metadata, which is the objects and
distributed tables (in general Citus tables).
In the future, it would be nice to sync the reference tables
in parallel across nodes.
Create ~720 distributed tables / ~23450 shards
```SQL
-- declaratively partitioned table
CREATE TABLE github_events_looooooooooooooong_name (
event_id bigint,
event_type text,
event_public boolean,
repo_id bigint,
payload jsonb,
repo jsonb,
actor jsonb,
org jsonb,
created_at timestamp
) PARTITION BY RANGE (created_at);
SELECT create_time_partitions(
table_name := 'github_events_looooooooooooooong_name',
partition_interval := '1 day',
end_at := now() + '24 months'
);
CREATE INDEX ON github_events_looooooooooooooong_name USING btree (event_id, event_type, event_public, repo_id);
SELECT create_distributed_table('github_events_looooooooooooooong_name', 'repo_id');
SET client_min_messages TO ERROR;
```
across 1 node: almost same as expected
```SQL
SELECT start_metadata_sync_to_primary_nodes();
Time: 15664.418 ms (00:15.664)
select start_metadata_sync_to_node(nodename,nodeport) from pg_dist_node;
Time: 14284.069 ms (00:14.284)
```
across 7 nodes: ~3.5x improvement
```SQL
SELECT start_metadata_sync_to_primary_nodes();
┌──────────────────────────────────────┐
│ start_metadata_sync_to_primary_nodes │
├──────────────────────────────────────┤
│ t │
└──────────────────────────────────────┘
(1 row)
Time: 25711.192 ms (00:25.711)
-- across 7 nodes
select start_metadata_sync_to_node(nodename,nodeport) from pg_dist_node;
Time: 82126.075 ms (01:22.126)
```
In the past (pre-11), we allowed removing worker nodes
that had active placements for replicated distributed
table, without even checking if there are any other
replicas of the same placement.
However, with #5469, we prevent disabling nodes via a hard
error when there is the last active placement of shard, as we
do for reference tables. Note that otherwise, we'd allow
users to lose data.
As of today, the NOTICE is completely irrelevant.
Before this commit, we had:
```SQL
SELECT citus_disable_node(nodename, nodeport, force boolean DEFAULT false)
```
Where, we allow forcing to disable first worker node with
`force:=true`. However, it entails the risk for losing
data / diverging placement data etc.
With `force` flag, we control disabling the first worker node,
and with `async` flag we control whether the changes are done
via bg worker or immediately.
```SQL
SELECT citus_disable_node(nodename, nodeport, force boolean DEFAULT false, sync boolean DEFAULT false)
```
Where we can achieve all the following:
| Mode | Data loss possibility | Can run in 2PC | Handle multiple node failures | Immediately effective |
| --- |--- |--- |--- |--- |
| force:false, sync: false | false | true | true | false |
| force:false, sync: true | false | false | false | true |
| force:true, sync: false | true | true | true | false |
| force:true, sync: true | false | false | false | true |
1) Remove useless columns
2) Show backends that are blocked on a DDL even before
gpid is assigned
3) One minor bugfix, where we clear distributedCommandOriginator
properly.
DESCRIPTION: Move pg_dist_object to pg_catalog
Historically `pg_dist_object` had been created in the `citus` schema as an experiment to understand if we could move our catalog tables to a branded schema. We quickly realised that this interfered with the UX on our managed services and other environments, where users connected via a user with the name of `citus`.
By default postgres put the username on the search_path. To be able to read the catalog in the `citus` schema we would need to grant access permissions to the schema. This caused newly created objects like tables etc, to default to this schema for creation. This failed due to the write permissions to that schema.
With this change we move the `pg_dist_object` catalog table to the `pg_catalog` schema, where our other schema's are also located. This makes the catalog table visible and readable by any user, like our other catalog tables, for debugging purposes.
Note: due to the change of schema, we had to disable 1 test that was running into a discrepancy between the schema and binary. Secondly, we needed to make the lookup functions for the `pg_dist_object` relation and their indexes less strict on the fallback of the naming due to an other test that, due to an unfortunate cache invalidation, needed to lookup the relation again. This makes that we won't default to _only_ resolving from `pg_catalog` outside of upgrades.
And also citus_calculate_gpid(nodeId,pid). These UDFs are just
wrappers for the existing functions. Useful for testing and simple
manipulation of citus_stat_activity.
Clusters created pre-Citus 11 mostly didn't have metadata sync enabled.
For those clusters, we add a utility UDF which fixes some minor issues
and sync the necessary objects to the workers.
Before this commit, dumping wait edges can only be used for
distributed deadlock detection purposes. With this commit,
we open the possibility that we can use it for any backend.
DESCRIPTION: Implement TEXT SEARCH CONFIGURATION propagation
The change adds support to Citus for propagating TEXT SEARCH CONFIGURATION objects. TSConfig objects cannot always be created in one create statement, and instead require a create statement followed by many alter statements to get turned into the object they should represent.
To support this we add functionality to the worker to create or replace objects based on a list of statements. When the lists of the local object and the remote object correspond 1:1 we skip the creation of the object and simply mark it distributed. This is especially important for TSConfig objects as initdb pre-populates databases with a dozen configurations (for many different languages).
When the user creates a new TSConfig based on the copy of an existing configuration there is no direct link to the object copied from. Since there is no link we can't simply rely on propagating the dependencies to the worker and send a qualified
With this commit we've started to propagate sequences and shell
tables within the object dependency resolution. So, ensuring any
dependencies for any object will consider shell tables and sequences
as well. Separate logics for both shell tables and sequences have
been removed.
Since both shell tables and sequences logic were implemented as a
part of the metadata handling before that logic, we were propagating
them while syncing table metadata. With this commit we've divided
metadata (which means anything except shards thereafter) syncing
logic into multiple parts and implemented it either as a part of
ActivateNode. You can check the functions called in ActivateNode
to check definition of different metadata.
Definitions of start_metadata_sync_to_node and citus_activate_node
have also been updated. citus_activate_node will basically create
an active node with all metadata and reference table shards.
start_metadata_sync_to_node will be same with citus_activate_node
except replicating reference tables. stop_metadata_sync_to_node
will remove all the metadata. All of those UDFs need to be called
by superuser.
BEGIN/COMMIT transaction block or in a UDF calling another UDF.
(2) Prohibit/Limit the delegated function not to do a 2PC (or any work on a
remote connection).
(3) Have a safety net to ensure the (2) i.e. we should block the connections
from the delegated procedure or make sure that no 2PC happens on the node.
(4) Such delegated functions are restricted to use only the distributed argument
value.
Note: To limit the scope of the project we are considering only Functions(not
procedures) for the initial work.
DESCRIPTION: Introduce a new flag "force_delegation" in create_distributed_function(),
which will allow a function to be delegated in an explicit transaction block.
Fixes#3265
Once the function is delegated to the worker, on that node during the planning
distributed_planner()
TryToDelegateFunctionCall()
CheckDelegatedFunctionExecution()
EnableInForceDelegatedFuncExecution()
Save the distribution argument (Constant)
ExecutorStart()
CitusBeginScan()
IsShardKeyValueAllowed()
Ensure to not use non-distribution argument.
ExecutorRun()
AdaptiveExecutor()
StartDistributedExecution()
EnsureNoRemoteExecutionFromWorkers()
Ensure all the shards are local to the node in the remoteTaskList.
NonPushableInsertSelectExecScan()
InitializeCopyShardState()
EnsureNoRemoteExecutionFromWorkers()
Ensure all the shards are local to the node in the placementList.
This also fixes a minor issue: Properly handle expressions+parameters in distribution arguments
Dropping sequences means we need to recreate
and hence losing the sequence.
With this commit, we keep the existing sequences
such that resyncing wouldn't drop the sequence.
We do that by breaking the dependency of the sequence
from the table.
With this commit, fix_partition_shard_index_names()
works significantly faster.
For example,
32 shards, 365 partitions, 5 indexes drop from ~120 seconds to ~44 seconds
32 shards, 1095 partitions, 5 indexes drop from ~600 seconds to ~265 seconds
`queryStringList` can be really long, because it may contain #partitions * #indexes entries.
Before this change, we were actually going through the executor where each command
in the query string triggers 1 round trip per entry in queryStringList.
The aim of this commit is to avoid the round-trips by creating a single query string.
I first simply tried sending `q1;q2;..;qn` . However, the executor is designed to
handle `q1;q2;..;qn` type of query executions via the infrastructure mentioned
above (e.g., by tracking the query indexes in the list and doing 1 statement
per round trip).
One another option could have been to change the executor such that only track
the query index when `queryStringList` is provided not with queryString
including multiple `;`s . That is (a) more work (b) could cause weird edge
cases with failure handling (c) felt like coding a special case in to the executor
This UDF coordinates connectivity checks accross the whole cluster.
This UDF gets the list of active readable nodes in the cluster, and
coordinates all connectivity checks in sequential order.
The algorithm is:
for sourceNode in activeReadableWorkerList:
c = connectToNode(sourceNode)
for targetNode in activeReadableWorkerList:
result = c.execute(
"SELECT citus_check_connection_to_node(targetNode.name,
targetNode.port")
emit sourceNode.name,
sourceNode.port,
targetNode.name,
targetNode.port,
result
- result -> true -> connection attempt from source to target succeeded
- result -> false -> connection attempt from source to target failed
- result -> NULL -> connection attempt from the current node to source node failed
I suggest you use the following query to get an overview on the connectivity:
SELECT bool_and(COALESCE(result, false))
FROM citus_check_cluster_node_health();
Whenever this query returns false, there is a connectivity issue, check in detail.
Before that PR we were updating citus.pg_dist_object metadata, which keeps
the metadata related to objects on Citus, only on the coordinator node. In
order to allow using those object from worker nodes (or erroring out with
proper error message) we've started to propagate that metedata to worker
nodes as well.
citus_check_connection_to_node runs a simple query on a remote node and
reports whether this attempt was successful.
This UDF will be used to make sure each worker node can connect to all
the worker nodes in the cluster.
parameters:
nodename: required
nodeport: optional (default: 5432)
return value:
boolean success
As of master branch, Citus does all the modifications to replicated tables
(e.g., reference tables and distributed tables with replication factor > 1),
via 2PC and avoids any shardstate=3. As a side-effect of those changes,
handling node failures for replicated tables change.
With this PR, when one (or multiple) node failures happen, the users would
see query errors on modifications. If the problem is intermitant, that's OK,
once the node failure(s) recover by themselves, the modification queries would
succeed. If the node failure(s) are permenant, the users should call
`SELECT citus_disable_node(...)` to disable the node. As soon as the node is
disabled, modification would start to succeed. However, now the old node gets
behind. It means that, when the node is up again, the placements should be
re-created on the node. First, use `SELECT citus_activate_node()`. Then, use
`SELECT replicate_table_shards(...)` to replicate the missing placements on
the re-activated node.
During pg upgrades, we have seen that it is not guaranteed that a
columnar table will be created after metadata objects got created.
Prior to changes done in this commit, we had such a dependency
relationship in `pg_depend`:
```
columnar_table ----> columnarAM ----> citus extension
^ ^
| |
columnar.storage_id_seq -------------------- |
|
columnar.stripe -------------------------------
```
Since `pg_upgrade` just knows to follow topological sort of the objects
when creating database dump, above dependency graph doesn't imply that
`columnar_table` should be created before metadata objects such as
`columnar.storage_id_seq` and `columnar.stripe` are created.
For this reason, with this commit we add new records to `pg_depend` to
make columnarAM depending on all rel objects living in `columnar`
schema. That way, `pg_upgrade` will know it needs to create those before
creating `columnarAM`, and similarly, before creating any tables using
`columnarAM`.
Note that in addition to inserting those records via installation script,
we also do the same in `citus_finish_pg_upgrade()`. This is because,
`pg_upgrade` rebuilds catalog tables in the new cluster and that means,
we must insert them in the new cluster too.
We recently introduced a set of patches to 10.2, and introduced 10.2-4
migration version. This migration version only resides on `release-10.2`
branch, and is missing on our default branch. This creates a problem
because we do not have a valid migration path from 10.2 to latest 11.0.
To remedy this issue, I copied the relevant migration files from
`release-10.2` branch, and renamed some of our migration files on
default branch to make sure we have a linear upgrade path.
* Add udf to include shardId in broken partition shard index names
* Address reviews: rename index such that operations can be done on it
* More comprehensive index tests
* Final touches and formatting
- get_missing_time_partition_ranges: Gets the ranges of missing partitions for the given table, interval and range unless any existing partition conflicts with calculated missing ranges.
- create_time_partitions: Creates partitions by getting range values from get_missing_time_partition_ranges.
- drop_old_time_partitions: Drops partitions of the table older than given threshold.
Relevant PG commit:
9e38c2bb5093ceb0c04d6315ccd8975bd17add66
fix array_cat_agg for pg upgrades
array_cat_agg now needs to take anycompatiblearray instead of anyarray
because array_cat changed its type from anyarray to anycompatiblearray
with pg14.
To handle upgrades correctly, we drop the aggregate in
citus_pg_prepare_upgrade. To be able to drop it, we first remove the
dependency from pg_depend.
Then we create the right aggregate in citus_finish_pg_upgrade and we
also add the dependency back to pg_depend.
update_distributed_table_colocation can be called by the relation
owner, and internally it updates pg_dist_partition. With this
commit, update_distributed_table_colocation uses an internal
UDF to access pg_dist_partition.
As a result, this operation can now be done by regular users
on MX.
Before this commit, we always synced the metadata with superuser.
However, that creates various edge cases such as visibility errors
or self distributed deadlocks or complicates user access checks.
Instead, with this commit, we use the current user to sync the metadata.
Note that, `start_metadata_sync_to_node` still requires super user
because accessing certain metadata (like pg_dist_node) always require
superuser (e.g., the current user should be a superuser).
However, metadata syncing operations regarding the distributed
tables can now be done with regular users, as long as the user
is the owner of the table. A table owner can still insert non-sense
metadata, however it'd only affect its own table. So, we cannot do
anything about that.
* Add parameter to cleanup metadata
* Set clear metadata default to true
* Add test for clearing metadata
* Separate test file for start/stop metadata syncing
* Fix stop_sync bug for secondary nodes
* Use PreventInTransactionBlock
* DRemovedebuggiing logs
* Remove relation not found logs from mx test
* Revert localGroupId when doing stop_sync
* Move metadata sync test to mx schedule
* Add test with name that needs to be quoted
* Add test for views and matviews
* Add test for distributed table with custom type
* Add comments to test
* Add test with stats, indexes and constraints
* Fix matview test
* Add test for dropped column
* Add notice messages to stop_metadata_sync
* Add coordinator check to stop metadat sync
* Revert local_group_id only if clearMetadata is true
* Add a final check to see the metadata is sane
* Remove the drop verbosity in test
* Remove table description tests from sync test
* Add stop sync to coordinator test
* Change the order in stop_sync
* Add test for hybrid (columnar+heap) partitioned table
* Change error to notice for stop sync to coordinator
* Sync at the end of the test to prevent any failures
* Add test case in a transaction block
* Remove relation not found tests
Sometimes the background daemon doesn't cleanup orphaned shards quickly
enough. It's useful to have a UDF to trigger this removal when needed.
We already had a UDF like this but it was only used during testing. This
exposes that UDF to users. As a safety measure it cannot be run in a
transaction, because that would cause the background daemon to stop
cleaning up shards while this transaction is running.
Without this change the rebalancer progress monitor gets the shard sizes
from the `shardlength` column in `pg_dist_placement`. This column needs to
be updated manually by calling `citus_update_table_statistics`.
However, `citus_update_table_statistics` could lead to distributed
deadlocks while database traffic is on-going (see #4752).
To work around this we don't use `shardlength` column anymore. Instead
for every rebalance we now fetch all shard sizes on the fly.
Two additional things this does are:
1. It adds tests for the rebalance progress function.
2. If a shard move cannot be done because a source or target node is
unreachable, then we error in stop the rebalance, instead of showing
a warning and continuing. When using the by_disk_size rebalance
strategy it's not safe to continue with other moves if a specific
move failed. It's possible that the failed move made space for the
next move, and because the failed move never happened this space now
does not exist.
3. Adds two new columns to the result of `get_rebalancer_progress` which
shows the size of the shard on the source and target node.
Fixes#4930
Every move in the rebalancer algorithm results in an improvement in the
balance. However, even if the improvement in the balance was very small
the move was still chosen. This is especially problematic if the shard
itself is very big and the move will take a long time.
This changes the rebalancer algorithm to take the relative size of the
balance improvement into account when choosing moves. By default a move
will not be chosen if it improves the balance by less than half of the
size of the shard. An extra argument is added to the rebalancer
functions so that the user can decide to lower the default threshold if
the ignored move is wanted anyway.
* When moving a shard to a new node ensure there is enough space
* Add WairForMiliseconds time utility
* Add more tests and increase readability
* Remove the retry loop and use a single udf for disk stats
* Address review
* address review
Co-authored-by: Jelte Fennema <github-tech@jeltef.nl>
* Introduce 3 partitioned size udfs
* Add tests for new partition size udfs
* Fix type incompatibilities
* Convert UDFs into pure sql functions
* Fix function comment
* Reimplement citus_update_table_statistics
* Update stats for the given table not colocation group
* Add tests for reimplemented citus_update_table_statistics
* Use coordinated transaction, merge with citus_shard_sizes functions
* Update the old master_update_table_statistics as well
* Sort results in citus_shards and give raw size
Sort results so that it is consistent and also similar to citus_tables.
Use raw size in the output so that doing operations on the size is
easier.
* Change column ordering
With citus shard helper view, we can easily see:
- where each shard is, which node, which port
- what kind of table it belongs to
- its size
With such a view, we can see shards that have a size bigger than some
value, which could be useful. Also debugging can be easier in production
as well with this view.
Fetch shards in one go per node
The previous implementation was slow because it would do a lot of round
trips, one per shard to be exact. Hence it is improved so that we fetch
all the shard_name, shard-size pairs per node in one go.
Construct shards_names, sizes query on coordinator
* Replace master_add_node with citus_add_node
* Replace master_activate_node with citus_activate_node
* Replace master_add_inactive_node with citus_add_inactive_node
* Use master udfs in old scripts
* Replace master_add_secondary_node with citus_add_secondary_node
* Replace master_disable_node with citus_disable_node
* Replace master_drain_node with citus_drain_node
* Replace master_remove_node with citus_remove_node
* Replace master_set_node_property with citus_set_node_property
* Replace master_unmark_object_distributed with citus_unmark_object_distributed
* Replace master_update_node with citus_update_node
* Replace master_update_shard_statistics with citus_update_shard_statistics
* Replace master_update_table_statistics with citus_update_table_statistics
* Rename master_conninfo_cache_invalidate to citus_conninfo_cache_invalidate
Rename master_dist_local_group_cache_invalidate to citus_dist_local_group_cache_invalidate
* Replace master_copy_shard_placement with citus_copy_shard_placement
* Replace master_move_shard_placement with citus_move_shard_placement
* Rename master_dist_node_cache_invalidate to citus_dist_node_cache_invalidate
* Rename master_dist_object_cache_invalidate to citus_dist_object_cache_invalidate
* Rename master_dist_partition_cache_invalidate to citus_dist_partition_cache_invalidate
* Rename master_dist_placement_cache_invalidate to citus_dist_placement_cache_invalidate
* Rename master_dist_shard_cache_invalidate to citus_dist_shard_cache_invalidate
* Drop master_modify_multiple_shards
* Rename master_drop_all_shards to citus_drop_all_shards
* Drop master_create_distributed_table
* Drop master_create_worker_shards
* Revert old function definitions
* Add missing revoke statement for citus_disable_node
Jelte Fennema
Ahmet Gedemenli
Sameer Awasekar
Hanefi Onaldi
Nitish Upreti
ywj
Halil Ozan Akgul
Onder Kalaci
Marco Slot
Nils Dijk
Burak Velioglu
Teja Mupparti
Önder Kalacı
Onur Tirtir
Philip Dubé
Naisila Puka
Sait Talha Nisanci