DESCRIPTION: Drops PG13 Support
This commit is the first phase of dropping PG13 support.
It consists of the following:
- Removes pg13 from CI tests
Among other things, Citus upgrade tests should now use PG14.
Earliest Citus version supporting PG14 is 10.2.
We also pick 11.3 version for upgrade_pg_dist_cleanup tests.
Therefore, we run the citus upgrade tests with versions 10.2 and 11.3.
- Removes pg13 from configure script
- Remove upgrade_columnar_metapage upgrade tests
We populate first_row_number column of columnar.stripe table
during citus 10.1-10.2 upgrade. Given that we start from citus 10.2.0,
which is the oldest version supporting PG14, we don't have that
upgrade path anymore. Hence we remove these tests.
- Removes upgrade_pg_dist_object_test and upgrade_partition_constraints tests
These upgrade tests require the citus old version to be less than 10.0.
Given that we drop support for PG13, we run upgrade tests with PG14,
which starts with 10.2.
So we remove these upgrade tests.
- Documents that upgrade_post_11 should upgrade from version less than 11
In this way we make sure we run
citus_finalize_upgrade_to_citus11 script
- Adds needed alternative output for upgrade_citus_finish_citus_upgrade
Given that we use 11.3 as the citus old version as well,
we add this alternative output because pg_catalog.citus_finish_citus_upgrade()
makes sense if last_upgrade_major_version < 11. See below for reference:
pg_catalog.citus_finish_citus_upgrade():
...
IF last_upgrade_major_version < 11 THEN
PERFORM citus_finalize_upgrade_to_citus11();
performed_upgrade := true;
END IF;
IF NOT performed_upgrade THEN
RAISE NOTICE 'already at the latest distributed
schema version (%)', last_upgrade_version_string;
RETURN;
END IF;
...
And that's it :)
The second phase of dropping PG13 support will consist in removing
all the PG13 specific compilation paths/tests in the Citus repo.
Will be done soon.
DESCRIPTION: Adds citus.enable_schema_based_sharding GUC that allows
sharding the database based on schemas when enabled.
* Refactor the logic that automatically creates Citus managed tables
* Refactor CreateSingleShardTable() to allow specifying colocation id
instead
* Add support for schema-based-sharding via a GUC
### What this PR is about:
Add **citus.enable_schema_based_sharding GUC** to enable schema-based
sharding. Each schema created while this GUC is ON will be considered
as a tenant schema. Later on, regardless of whether the GUC is ON or
OFF, any table created in a tenant schema will be converted to a
single shard distributed table (without a shard key). All the tenant
tables that belong to a particular schema will be co-located with each
other and will have a shard count of 1.
We introduce a new metadata table --pg_dist_tenant_schema-- to do the
bookkeeping for tenant schemas:
```sql
psql> \d pg_dist_tenant_schema
Table "pg_catalog.pg_dist_tenant_schema"
┌───────────────┬─────────┬───────────┬──────────┬─────────┐
│ Column │ Type │ Collation │ Nullable │ Default │
├───────────────┼─────────┼───────────┼──────────┼─────────┤
│ schemaid │ oid │ │ not null │ │
│ colocationid │ integer │ │ not null │ │
└───────────────┴─────────┴───────────┴──────────┴─────────┘
Indexes:
"pg_dist_tenant_schema_pkey" PRIMARY KEY, btree (schemaid)
"pg_dist_tenant_schema_unique_colocationid_index" UNIQUE, btree (colocationid)
psql> table pg_dist_tenant_schema;
┌───────────┬───────────────┐
│ schemaid │ colocationid │
├───────────┼───────────────┤
│ 41963 │ 91 │
│ 41962 │ 90 │
└───────────┴───────────────┘
(2 rows)
```
Colocation id column of pg_dist_tenant_schema can never be NULL even
for the tenant schemas that don't have a tenant table yet. This is
because, we assign colocation ids to tenant schemas as soon as they
are created. That way, we can keep associating tenant schemas with
particular colocation groups even if all the tenant tables of a tenant
schema are dropped and recreated later on.
When a tenant schema is dropped, we delete the corresponding row from
pg_dist_tenant_schema. In that case, we delete the corresponding
colocation group from pg_dist_colocation as well.
### Future work for 12.0 release:
We're building schema-based sharding on top of the infrastructure that
adds support for creating distributed tables without a shard key
(https://github.com/citusdata/citus/pull/6867).
However, not all the operations that can be done on distributed tables
without a shard key necessarily make sense (in the same way) in the
context of schema-based sharding. For example, we need to think about
what happens if user attempts altering schema of a tenant table. We
will tackle such scenarios in a future PR.
We will also add a new UDF --citus.schema_tenant_set() or such-- to
allow users to use an existing schema as a tenant schema, and another
one --citus.schema_tenant_unset() or such-- to stop using a schema as
a tenant schema in future PRs.
* Adjust configure script to allow PG15
* Adds copy of ruleutils_14.c as ruleutils_15.c
* Uses get_namespace_name_or_temp in ruleutils_15.c
Relevant PG commit:
48c5c9068211e0a04fd9553c8714b2821ed3ad17
* Clean up code using "(expr) ? true : false" in ruleutils_15.c
Relevant PG commit:
fd0625c7a9c679c0c1e896014b8f49a489c3a245
* Change varno from Index (unsigned int) to int in ruleutils_15.c
Relevant PG commit:
e3ec3c00d85bd2844ffddee83df2bd67c4f8297f
* Adds find_recursive_union to ruleutils_15.c
Relevant PG commit:
3f50b82639637c9908afa2087de7588450aa866b
* Fix display of SQL-std func's args in INSERT/SELECT in ruleutils_15.c
Relevant PG commit:
a8d8445a7b2f80f6d0bfe97b19f90bd2cbef8759
* Fix ruleutils_15.c's dumping of whole-row Vars in more contexts
Relevant PG commit:
43c2175121c829c8591fc5117b725f1f22bfb670
* Fix assorted missing logic for GroupingFunc nodes in ruleutils_15.c
Relevant PG commit:
2591ee8ec44d8cbc8e1226550337a64c684746e4
* Adds grammar support for SQL/JSON clauses in ruleutils_15.c
Relevant PG commit:
f79b803dcc98d707450e158db3638dc67ff8380b
* Adds SQL/JSON constructors to ruleutils_15.c
Relevant PG commits:
f4fb45d15c59d7add2e1b81a9d477d0119a9691a
cc7401d5ca498a84d9b47fd2e01cebd8e830e558
* Adds support for MERGE in ruleutils_15.c
Relevant PG commit:
7103ebb7aae8ab8076b7e85f335ceb8fe799097c
* Add IS JSON predicate to ruleutils_15.c
Relevant PG commit:
33a377608fc29cdd1f6b63be561eab0aee5c81f0
* Add SQL/JSON query functions to ruleutils_15.c
Relevant PG commit:
1a36bc9dba8eae90963a586d37b6457b32b2fed4
* Adds three different SQL/JSON values to ruleutils_15.c
Relevant PG commits:
606948b058dc16bce494270eea577011a602810e
49082c2cc3d8167cca70cfe697afb064710828ca
* Adds JSON table functions in ruleutils_15.c
Relevant PG commit:
4e34747c88a03ede6e9d731727815e37273d4bc9
* Add PLAN function for JSON table in ruleutils_15.c
Relevant PG commit:
fadb48b00e02ccfd152baa80942de30205ab3c4f
* Remove extra blank lines before block-closing braces ruleutils_15.c
Relevant PG commit:
24d2b2680a8d0e01b30ce8a41c4eb3b47aca5031
* set_deparse_plan: Reuse variable to appease Coverity ruleutils_15.c
Relevant PG commit:
e70813fbc4aaca35ec012d5a426706bd54e4acab
* Mechanical code beautification ruleutils_15.c
Relevant PG commit:
23e7b38bfe396f919fdb66057174d29e17086418
* Rename value_type to item_type in ruleutils_15.c
Relevant PG commit:
3ab9a63cb638a1fd99475668e2da9c237495aeda
* Show 'AS "?column?"' explicitly when it's important in ruleutils_15.c
Relevant PG commit:
c7461fc25558832dd347a9c8150b0f1ed85e36e8
* Fix ruleutils_15.c issues with dropped cols in funcs-returning-composite
Relevant PG commit:
c1d1e8469c77ce6b8e5310955580b4a3eee7fe96
* Change comment regarding functions returning composite in ruleutils_15.c
Relevant PG commit:
c2fa113ddb1117b1f03e91960f65d5d7d8a90270
* Replace int nodes with bool nodes where needed
In PG15, Boolean nodes are added. Pre PG15, internal Boolean values
in Create Role commands were represented by Integer nodes. This
commit replaces int nodes logic with bool nodes logic where needed.
Mostly there are CREATE ROLE logic changes.
Relevant PG commit:
941460fcf731a32e6a90691508d5cfa3d1f8eeaf
* Handle new option colliculocale in CREATE COLLATION logic
In PG15, there is an added option to use ICU as global locale provider.
pg_collation has three locale-related fields: collcollate and collctype,
which are libc-related fields, and a new one colliculocale, which is the
ICU-related field. Only the libc-related fields or the ICU-related field
is set, never both.
Relevant PG commits:
f2553d43060edb210b36c63187d52a632448e1d2
54637508f87bd5f07fb9406bac6b08240283be3b
* Add PG15 tests to CI using test images that have 15beta2 (#6093)
* Change warning message in pg_signal_backend()
Relevant PG commit:
7fa945b857cc1b2964799411f1633468826861ff
* Revert "Add missing ifdef for PG 15"
This reverts commit c7b51025ab.
* Fixes tests for ALTER TRIGGER RENAME consistency for part. tables
Relevant PG commit:
80ba4bb383538a2ee846fece6a7b8da9518b6866
* Prevent creating child triggers on partitions when adding new node
Pre PG15, tgisinternal is true for a "child" trigger on a partition
cloned from the trigger on the parent.
In PG15, tgisinternal is false in that case. However, we don't want to
create this trigger on the partition since it will create a conflict
when we try to attach the partition to the parent table:
ERROR: trigger "..." for relation "{partition_name}" already exists
Relevant PG commit:
f4566345cf40b068368cb5617e61318da60676ec
* Fix tests for generated columns dependency changes
In PG15, For GENERATED columns, all dependencies of the generation
expression are recorded as NORMAL dependencies of the column itself.
This requires CASCADE to drop generated cols with the original col.
PRE PG15, dependencies were recorded as AUTO, with which
generated columns are silently dropped with the original column.
Relevant PG commit:
cb02fcb4c95bae08adaca1202c2081cfc81a28b5
* Explicitly cast catalog "char" column to text before concatenation
Relevant PG commit:
07eee5a0dc642d26f44d65c4e6263304208e8583
* Remove 'AS "?column?"' from test outputs
There were some instances in the following tst outputs
in planning debug outputs where AS "?column?" is added.
We add a normalization rule to remove it as it is not
important.
cte_inline.out
recursive_relation_planning_restriction_pushdown.out
Relevant PG commit:
c7461fc25558832dd347a9c8150b0f1ed85e36e8
* Use pg_backup_stop(PG15) instead of pg_stop_backup(PG<15)
Add an alternative test output because of the change in the
backup modes of Postgres. Specifically here, there is a renaming
issue: pg_stop_backup PRE PG15 vs pg_backup_stop PG15+
The alternative output can be deleted when we drop support for PG14
Relevant PG commit:
39969e2a1e4d7f5a37f3ef37d53bbfe171e7d77a
* Adds citus.mitmfifo GUC
Previously we setting this configuration parameter
in the fly for failure tests schedule.
However, PG15 doesn't allow that anymore: reserved prefixes
like "citus" cannot be used to set non-existing GUCs.
Relevant PG commit:
88103567cb8fa5be46dc9fac3e3b8774951a2be7
* Handles EXPLAIN output diffs in PG15 - Extra result lines
To handle extra "Result" lines in explain outputs, we add explain
method to multi_test_helpers.sql file
- plan_without_result_lines() is added for cases where we want the
whole explain output with only "Result" lines removed
* Handles EXPLAIN output diffs in PG15, Hash Agg/Join leverage
To handle differences in usage of GroupAggregate vs HashAggregate
or Merge Join vs Hash join in cases where this detail doesn't
seem to matter, we use coordinator_plan().
- coordinator_plan() is updated to remove "Result" lines
There are some cases where we have subplans so we add a new
function that prints all Task Count lines as well
- coordinator_plan_with_subplans()
Still not sure of the relevant PG commit
Could be db0d67db2401eb6238ccc04c6407a4fd4f985832
but disabling enable_group_by_reordering didn't help.
* Handles EXPLAIN output diffs in PG15: enable_group_by_reordering
Relevant PG commit
db0d67db2401eb6238ccc04c6407a4fd4f985832
* Normalizes Memory Usage, Buckets, Batches for PG15 explain diffs
We create a new function in multi_test_helpers, which is similar
to explain_merge function in PG15. This explain helper function
normalies Memory Usage, Buckets and Batches, and we use it in the
tests which give a different output for PG15.
* Bump test images to 15beta3 (#6172)
* Omit namespace in post-copy errmsg
Relevant PG commit:
069d33d0c5a021601245e44df77a0423ddd69359
* Handles EXPLAIN output diffs in PG15: extra arrows&result lines
To handle extra "->" arrows resulting from extra Result lines
in explain outputs, we add the following explain method to
multi_test_helpers.sql file
- plan_without_arrows() is added for cases where we want the
whole explain output without arrows and without Result lines
* Alters public schema's owner to pg_database_owner in PG15
In PG15, public schema is owned by pg_database_owner role.
In multi_extension, we drop and recreate the ppublic schema,
hence its owner become the default user in our tests, postgres.
Change that to pg_database_owner for PG15 consistency.
This results in alternative test output for public schema grants
in the following test:
grant_on_schema_propagation.sql
Relevant PG commit: b073c3ccd06e4cb845e121387a43faa8c68a7b62
* Add alternative test outputs for change in Insert Select display
citus_local_tables_queries.sql
coordinator_shouldhaveshards.sql
cte_inline.sql
insert_select_repartition.sql
intermediate_result_pruning.sql
local_shard_execution.sql
local_shard_execution_replicated.sql
multi_deparse_shard_query.sql
multi_insert_select.sql
multi_insert_select_conflict.sql
multi_mx_insert_select_repartition.sql
mx_coordinator_shouldhaveshards.sql
single_node.sql
Relevant PG commit:
a8d8445a7b2f80f6d0bfe97b19f90bd2cbef8759
* Fixes columnar tap tests for PG15
In PG15, Perl test modules have been moved to a new namespace.
Also, postgres node new() and get_new_node() methods have been
unified to one method: new()
We create separate tap tests for PG13/14 and PG15+
and update the Makefiles accordingly.
Relevant PG commits:
201a76183e2056c2217129e12d68c25ec9c559c8
b3b4d8e68ae83f432f43f035c7eb481ef93e1583
* Handles EXPLAIN output diffs in PG15: HashAgg Leverage,alt. output
Still not sure of the relevant PG commit
Could be db0d67db2401eb6238ccc04c6407a4fd4f985832
but disabling enable_group_by_reordering didn't help.
For working on initial changes to postgres beta versions make the version check in `./configure` default, but optional.
Normal users will still get the postgres version check error when building on other postgres versions, however, advanced users can use this flag to force configure to pass and find the compilation errors Citus would run into.
Use of the flag is not advised for users not understanding what this does.
DESCRIPTION: add gitref to the output of citus_version
During debugging of custom builds it is hard to know the exact version of the citus build you are using. This patch will add a human readable/understandable git reference to the build of citus which can be retrieved by calling `citus_version();`.
This change was actually already intended in #3124. However, the
postgres Makefile manually enables this warning too. This way we undo
that.
To confirm that it works two functions were changed to make use of not
having the warning anymore.
This makes three warnings hard errors:
1. `implicit-int`
> Warn when a declaration does not specify a type.
2. `implicit-function-declaration`
> Give a warning whenever a function is used before being declared.
3. `return-type`
> Warn whenever a function is defined with a return type that defaults to
> "int". Also warn about any "return" statement with no return value in
> a function whose return type is not "void" (falling off the end of the
> function body is considered returning without a value).
>
> For C only, warn about a "return" statement with an expression in a
> function whose return type is "void", unless the expression type is
> also "void".
The compiler behaviour when these warnings occur is not the behaviour
the developer expects. So even during development it makes sense that
they are errors.
When adding a `-Wno-some-error` flag, instead of trying to check for
`-Wno-some-error` support this checks for `-Wsome-error` support.
This is done because currently there's the a problem when compiling
citus with `./configure CFLAGS=-Werror`. If there's a warning (which is
then converted to an error) in addition to this error, the output will contain
the following message with GCC 7:
```
cc1: error: unrecognized command line option ‘-Wno-gnu-variable-sized-type-not-at-end’ [-Werror]
```
This is because of the following behaviour of GCC in case of unknown warnings:
> When an unrecognized warning option is requested (e.g., -Wunknown-warning), GCC
> emits a diagnostic stating that the option is not recognized. However, if the
> -Wno- form is used, the behavior is slightly different: no diagnostic is
> produced for -Wno-unknown-warning unless other diagnostics are being produced.
> This allows the use of new -Wno- options with old compilers, but if something
> goes wrong, the compiler warns that an unrecognized option is present.
By changing the check to `-Wsome-error`, the check will actually fail
when the warning is not supported. Instead of silently being ignored
when checking, but then coming up when another error happens.
Everything supports this, works in clang 6 and gcc 4.7
Also removes -Wdeclaration-after-statement, since declarations
after statements are only not supported in ISO C90.
Fixes#3122
@thanodnl told me it was a bit of a problem that it's impossible to see
the history of a UDF in git. The only way to do so is by reading all the
sql migration files from new to old. Another problem is that it's also
hard to review the changed UDF during code review, because to find out
what changed you have to do the same. I thought of a IMHO better (but
not perfect) way to handle this.
We keep the definition of a UDF in sql/udfs/{name_of_udf}/latest.sql.
That file we change whenever we need to make a change to the the UDF. On
top of that you also make a snapshot of the file in
sql/udfs/{name_of_udf}/{migration-version}.sql (e.g. 9.0-1.sql) by
copying the contents. This way you can easily view what the actual
changes were by looking at the latest.sql file.
There's still the question on how to use these files then. Sadly
postgres doesn't allow inclusion of other sql files in the migration sql
file (it does in psql using \i). So instead I used the C preprocessor+
make to compile a sql/xxx.sql to a build/sql/xxx.sql file. This final
build/sql/xxx.sql file has every occurence of #include "somefile.sql" in
sql/xxx.sql replaced by the contents of somefile.sql.
See a9c35cf85c
clang raises a warning due to FunctionCall2InfoData technically being variable sized
This is fine, as the struct is the size we want it to be. So silence the warning
These hadn't been looked at in a while, and I'm somewhat certain they
actually were running with optimization on, which is pretty bad.
Swapped out the lower-level flags for `--coverage`, which will work
with both `clang` and `gcc`. On some platforms, linker flags are need-
ed as well.
aykut-bozkurt
Naisila Puka
Onur Tirtir
Ahmet Gedemenli
Nils Dijk
Marco Slot
Hanefi Onaldi
Halil Ozan Akgul
SaitTalhaNisanci
Hadi Moshayedi
Hadi Moshayedi
Hanefi Onaldi
Jelte Fennema
Philip Dubé
Jason Petersen
Jason Petersen
Jason Petersen
mehmet furkan şahin
velioglu