Before that PR we were updating citus.pg_dist_object metadata, which keeps
the metadata related to objects on Citus, only on the coordinator node. In
order to allow using those object from worker nodes (or erroring out with
proper error message) we've started to propagate that metedata to worker
nodes as well.
citus_check_connection_to_node runs a simple query on a remote node and
reports whether this attempt was successful.
This UDF will be used to make sure each worker node can connect to all
the worker nodes in the cluster.
parameters:
nodename: required
nodeport: optional (default: 5432)
return value:
boolean success
As of master branch, Citus does all the modifications to replicated tables
(e.g., reference tables and distributed tables with replication factor > 1),
via 2PC and avoids any shardstate=3. As a side-effect of those changes,
handling node failures for replicated tables change.
With this PR, when one (or multiple) node failures happen, the users would
see query errors on modifications. If the problem is intermitant, that's OK,
once the node failure(s) recover by themselves, the modification queries would
succeed. If the node failure(s) are permenant, the users should call
`SELECT citus_disable_node(...)` to disable the node. As soon as the node is
disabled, modification would start to succeed. However, now the old node gets
behind. It means that, when the node is up again, the placements should be
re-created on the node. First, use `SELECT citus_activate_node()`. Then, use
`SELECT replicate_table_shards(...)` to replicate the missing placements on
the re-activated node.
The checks for preventing to remove a node are very much reference
table centric. We are soon going to add the same checks for replicated
tables. So, make the checks generic such that:
(a) replicated tables fit naturally
(b) we can the same checks in `citus_disable_node`.
Before this commit, we acquire the metadata locks on the reference
tables while removing/disabling a node on all the MX nodes.
Although it has some marginal benefits, such as a concurrent
modification during remove/disable node blocks, instead of erroring
out, the drawbacks seems worse. Both citus_remove_node and citus_disable_node
are not tolerant to multiple node failures.
With this commit, we relax the locks. The implication is that while
a node is removed/disabled, users might see query errors. On the
other hand, this change becomes removing/disabling nodes more
tolerant to multiple node failures.
When refactoring storage layer in #4907, we deleted the code that allows
overwriting a disk page previously written but not known by metadata.
Readers can see the change that introduced the code allows doing so in
commit a8da9acc63.
The reasoning was that; as of 10.2, we started aligning page
reservations (`AlignReservation`) for subsequent writes right after
allocating pages from disk. That means, even if writer transaction
fails, subsequent writes are guaranteed to allocate a new page and write
to there. For this reason, attempting to write to a page allocated
before is not possible for a columnar table that user created when using
v10.2.x.
However, since the older versions of columnar doesn't do that, following
example scenario can still result in writing to such disk page, even if
user now upgraded to v10.2.x. This is because, when upgrading storage to
2.0 (`ColumnarStorageUpdateIfNeeded`), we calculate `reservedOffset` of
the metapage based on the highest used address known by stripe
metadata (`GetHighestUsedAddressAndId`). However, stripe metadata
doesn't have entries for aborted writes. As a result, highest used
address would be computed by ignoring pages that are allocated but not
used.
- User attempts writing to columnar table on Citus v10.0x/v10.1x.
- Write operation fails for some reason.
- User upgrades Citus to v10.2.x.
- When attempting to write to same columnar table, they hit to "attempt
to write columnar data .." error since write operation done in the
older version of columnar already allocated that page, and now we are
overwriting it.
For this reason, with this commit, we re-do the change done in
a8da9acc63.
And for the reasons given above, it wasn't possible to add a test for
this commit via usual code-paths. For this reason, added a UDF only for
testing purposes so that we can reproduce the exact scenario in our
regression test suite.
During pg upgrades, we have seen that it is not guaranteed that a
columnar table will be created after metadata objects got created.
Prior to changes done in this commit, we had such a dependency
relationship in `pg_depend`:
```
columnar_table ----> columnarAM ----> citus extension
^ ^
| |
columnar.storage_id_seq -------------------- |
|
columnar.stripe -------------------------------
```
Since `pg_upgrade` just knows to follow topological sort of the objects
when creating database dump, above dependency graph doesn't imply that
`columnar_table` should be created before metadata objects such as
`columnar.storage_id_seq` and `columnar.stripe` are created.
For this reason, with this commit we add new records to `pg_depend` to
make columnarAM depending on all rel objects living in `columnar`
schema. That way, `pg_upgrade` will know it needs to create those before
creating `columnarAM`, and similarly, before creating any tables using
`columnarAM`.
Note that in addition to inserting those records via installation script,
we also do the same in `citus_finish_pg_upgrade()`. This is because,
`pg_upgrade` rebuilds catalog tables in the new cluster and that means,
we must insert them in the new cluster too.
- [x] Add some more regression test coverage
- [x] Make sure returning works fine in case of
local execution + remote execution
(task->partiallyLocalOrRemote works as expected, already added tests)
- [x] Implement locking properly (and add isolation tests)
- [x] We do #shardcount round-trips on `SerializeNonCommutativeWrites`.
We made it a single round-trip.
- [x] Acquire locks for subselects on the workers & add isolation tests
- [x] Add a GUC to prevent modification from the workers, hence increase the
coordinator-only throughput
- The performance slightly drops (~%15), unless
`citus.allow_modifications_from_workers_to_replicated_tables`
is set to false
Drop extension might cascade to columnar.options before dropping a
columnar table. In that case, we were getting below error when opening
columnar.options to delete records for the columnar table that we are
about to drop.: "ERROR: could not open relation with OID 0".
I somehow reproduced this bug easily when upgrading pg, that is why
adding added the test to after_pg_upgrade_schedule.
We recently introduced a set of patches to 10.2, and introduced 10.2-4
migration version. This migration version only resides on `release-10.2`
branch, and is missing on our default branch. This creates a problem
because we do not have a valid migration path from 10.2 to latest 11.0.
To remedy this issue, I copied the relevant migration files from
`release-10.2` branch, and renamed some of our migration files on
default branch to make sure we have a linear upgrade path.
Before this commit, we required the user to be owner of the shard/table
in order to call lock_shard_resources.
However, that is too restrictive. We can have users with GRANTS
to the table who are not owners of the tables/shards.
With this commit, we allow such patterns.
This PR is fixing 2 separate issues related to the local run of citus upgrade tests.
d3e7c825ab fixes the issue that, with our new testing infrastructure, we moved/renamed some of existing folders. This created a problem for local runs of citus upgrade tests since some paths were sensitive to such changes. This commit tries to make it more generic so that this issue is less likely to happen in the future, while also fixing the current issue.
93de6b60c3 we are fixing an issue that a new environment variable was added for citus upgrade tests, which is defined in the CI. 0cb51f8c37/.circleci/config.yml (L294)
This environment variable wasn't set in our local runs hence it would create problems. Instead of defining this environment variable in the local run, we change the citus_upgrade run command to use an existing env variable, which is now also set in the CI.
We fixed some crashes a while back that would only occur in cases where
the value of a distribution column would have result in a high or a very
low hash value. This adds a regression test for those crashes.
This test starts passing because of PR #4508, to be precise commit:
24e60b44a1
When I undo that commit this newly added test starts failing. This adds
this test to make sure we don't regress on this again.
There is a vulnerability in mitmproxy with the version we are using.
It would be hard to exploit anything with regards to the artifacts we ship as its only used in our test suite. Still its good hygiene to _not_ use software with known vulnerabilities.
This PR updates the version of python, mitmproxy and the crypto libraries used.
The latest version of mitmproxy for python 3.6 is not patched, hence the upgrade of python.
For our CI images this cascades into upgrading debian as well :)
For CI we bake these versions in our images so we need to update them as well.
Changes to the CI images: https://github.com/citusdata/the-process/pull/65
In the past, we allowed users to manually switch to 1PC
(e.g., one phase commit). However, with this commit, we
don't. All multi-shard modifications are done via 2PC.
With Citus 9.0, we introduced `citus.single_shard_commit_protocol` which
defaults to 2PC.
With this commit, we prevent any user to set it to 1PC and drop support
for `citus.single_shard_commit_protocol`.
Although this might add some overhead for users, it is already the default
behaviour (so less likely) and marking placements as INVALID is much
worse.
- citus_get_all_dependencies_for_object: emulate what Citus
would qualify as
dependency when adding
a new node
- citus_get_dependencies_for_object: emulate what Citus would qualify
as dependency when creating an
object
Example use:
```SQL
-- find all the depedencies of table test
SELECT
pg_identify_object(t.classid, t.objid, t.objsubid)
FROM
(SELECT * FROM pg_get_object_address('table', '{test}', '{}')) as addr
JOIN LATERAL
citus_get_all_dependencies_for_object(addr.classid, addr.objid, addr.objsubid) as t(classid oid, objid oid, objsubid int)
ON TRUE
ORDER BY 1;
```
Burak Velioglu
Halil Ozan Akgul
Hanefi Onaldi
Onder Kalaci
Onur Tirtir
Marco Slot
Önder Kalacı
Ahmet Gedemenli
naisila
Sait Talha Nisanci
Jelte Fennema
Nils Dijk
Philip Dubé