Support pushdown query where all the tables in the merge-sql are Citus-distributed, co-located, and both
the source and target relations are joined on the distribution column. This will generate multiple tasks
which execute independently after pushdown.
SELECT create_distributed_table('t1', 'id');
SELECT create_distributed_table('s1', 'id', colocate_with => ‘t1’);
MERGE INTO t1
USING s1
ON t1.id = s1.id
WHEN MATCHED THEN
UPDATE SET val = s1.val + 10
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED THEN
INSERT (id, val, src) VALUES (s1.id, s1.val, s1.src)
*The only exception for both the phases II and III is, UPDATEs and INSERTs must be done on the same shard-group
as the joined key; for example, below scenarios are NOT supported as the key-value to be inserted/updated is not
guaranteed to be on the same node as the id distribution-column.
MERGE INTO target t
USING source s ON (t.customer_id = s.customer_id)
WHEN NOT MATCHED THEN - -
INSERT(customer_id, …) VALUES (<non-local-constant-key-value>, ……);
OR this scenario where we update the distribution column itself
MERGE INTO target t
USING source s On (t.customer_id = s.customer_id)
WHEN MATCHED THEN
UPDATE SET customer_id = 100;
This implements the phase - II of MERGE sql support
Support routable query where all the tables in the merge-sql are distributed, co-located, and both the source and
target relations are joined on the distribution column with a constant qual. This should be a Citus single-task
query. Below is an example.
SELECT create_distributed_table('t1', 'id');
SELECT create_distributed_table('s1', 'id', colocate_with => ‘t1’);
MERGE INTO t1
USING s1 ON t1.id = s1.id AND t1.id = 100
WHEN MATCHED THEN
UPDATE SET val = s1.val + 10
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED THEN
INSERT (id, val, src) VALUES (s1.id, s1.val, s1.src)
Basically, MERGE checks to see if
There are a minimum of two distributed tables (source and a target).
All the distributed tables are indeed colocated.
MERGE relations are joined on the distribution column
MERGE .. USING .. ON target.dist_key = source.dist_key
The query should touch only a single shard i.e. JOIN AND with a constant qual
MERGE .. USING .. ON target.dist_key = source.dist_key AND target.dist_key = <>
If any of the conditions are not met, it raises an exception.
All the tables (target, source or any CTE present) in the SQL statement are local i.e. a merge-sql with a combination of Citus local and
Non-Citus tables (regular Postgres tables) should work and give the same result as Postgres MERGE on regular tables. Catch and throw an
exception (not-yet-supported) for all other scenarios during Citus-planning phase.
Removes unused job boundary tag `SUBQUERY_MAP_MERGE_JOB`.
Only usage is at `BuildMapMergeJob`, which is only called when the
boundary = `JOIN_MAP_MERGE_JOB`. Hence, it should be safe to remove.
* Remove if conditions with PG_VERSION_NUM < 13
* Remove server_above_twelve(&eleven) checks from tests
* Fix tests
* Remove pg12 and pg11 alternative test output files
* Remove pg12 specific normalization rules
* Some more if conditions in the code
* Change RemoteCollationIdExpression and some pg12/pg13 comments
* Remove some more normalization rules
We've had custom versions of Postgres its `foreach` macro which with a
hidden ListCell for quite some time now. People like these custom
macros, because they are easier to use and require less boilerplate.
This adds similar custom versions of Postgres its `forboth` macro. Now
you don't need ListCells anymore when looping over two lists at the same
time.
We re-define the meaning of active shard placement. It used
to only be defined via shardstate == SHARD_STATE_ACTIVE.
Now, we also add one more check. The worker node that the
placement is on should be active as well.
This is a preparation for supporting citus_disable_node()
for MX with multiple failures at the same time.
With this change, the maintanince daemon only needs to
sync the "node metadata" (e.g., pg_dist_node), not the
shard metadata.
Before this commit, we always synced the metadata with superuser.
However, that creates various edge cases such as visibility errors
or self distributed deadlocks or complicates user access checks.
Instead, with this commit, we use the current user to sync the metadata.
Note that, `start_metadata_sync_to_node` still requires super user
because accessing certain metadata (like pg_dist_node) always require
superuser (e.g., the current user should be a superuser).
However, metadata syncing operations regarding the distributed
tables can now be done with regular users, as long as the user
is the owner of the table. A table owner can still insert non-sense
metadata, however it'd only affect its own table. So, we cannot do
anything about that.
Ignore orphaned shards in more places
Only use active shard placements in RouterInsertTaskList
Use IncludingOrphanedPlacements in some more places
Fix comment
Add tests
/*
* The physical planner assumes that all worker queries would have
* target list entries based on the fact that at least the column
* on the JOINs have to be on the target list. However, there is
* an exception to that if there is a cartesian product join and
* there is no additional target list entries belong to one side
* of the JOIN. Once we support cartesian product join, we should
* remove this error.
*/
* Fix partition column index issue
We send column names to worker_hash/range_partition_table methods, and
in these methods we check the column name index from tuple descriptor.
Then this index is used to decide the bucket that the current row will
be sent for the repartition.
This becomes a problem when there are the same column names in the
tupleDescriptor. Then we can choose the wrong index. Hence the
partitioned data will be put to wrong workers. Then the result could
miss some data because workers might contain different range of data.
An example:
TupleDescriptor contains "trip_id", "car_id", "car_id" for one table.
It contains only "car_id" for the other table. And assuming that the
tables will be partitioned by car_id, it is not certain what should be
used for deciding the bucket number for the first table. Assuming value
2 goes to bucket 2 and value 3 goes to bucket 3, it is not certain which
bucket "1 2 3" (trip_id, car_id, car_id) row will go to.
As a solution we send the index of partition column in targetList
instead of the column name.
The old API is kept so that if workers upgrade work, it still works
(though it will have the same bug)
* Use the same method so that backporting is easier
Baseinfo also has pushed down filters etc, so it makes more sense to use
BaseRestrictInfo to determine what columns have constant equality
filters.
Also RteIdentity is used for removing conversion candidates instead of
rteIndex.
We should not recursively plan an already routable plannable query. An
example of this is (SELECT * FROM local JOIN (SELECT * FROM dist) d1
USING(a));
So we let the recursive planner do all of its work and at the end we
convert the final query to to handle unsupported joins. While doing each
conversion, we check if it is router plannable, if so we stop.
Only consider range table entries that are in jointree
If a range table is not in jointree then there is no point in
considering that because we are trying to convert range table entries to
subqueries for join use case.
Check equality in quals
We want to recursively plan distributed tables only if they have an
equality filter on a unique column. So '>' and '<' operators will not
trigger recursive planning of distributed tables in local-distributed
table joins.
Recursively plan distributed table only if the filter is constant
If the filter is not a constant then the join might return multiple rows
and there is a chance that the distributed table will return huge data.
Hence if the filter is not constant we choose to recursively plan the
local table.
* Fix incorrect join related fields
Ruleutils expect to give the original index of join columns hence we
should consider the dropped columns while setting the fields in
SetJoinRelatedFieldsCompat.
* add some more tests for joins
* Move tests to join.sql and create a utility function
Add sort method parameter for regression tests
Fix check-style
Change sorting method parameters to enum
Polish
Add task fields to OutTask
Add test into multi_explain
Fix isolation test
Introduce table entry utility functions
Citus table cache entry utilities are introduced so that we can easily
extend existing functionality with minimum changes, specifically changes
to these functions. For example IsNonDistributedTableCacheEntry can be
extended for citus local tables without the need to scan the whole
codebase and update each relevant part.
* Introduce utility functions to find the type of tables
A table type can be a reference table, a hash/range/append distributed
table. Utility methods are created so that we don't have to worry about
how a table is considered as a reference table etc. This also makes it
easy to extend the table types.
* Add IsCitusTableType utilities
* Rename IsCacheEntryCitusTableType -> IsCitusTableTypeCacheEntry
* Change citus table types in some checks
The codebase is updated to use varattnosync and varnosyn and we defined
the macros for older versions. This way we can just remove the macros
when we drop an older version.
The error message when index has opclassopts is improved and the commit
from postgres side is also included for future reference.
Also some minor style related changes are applied.
This commit mostly adds pg_get_triggerdef_command to our ruleutils_13.
This doesn't add anything extra for ruleutils 13 so it is basically a copy
of the change on ruleutils_12
For joins 3 new fields are added, joinleftcols, joinrightcols, and
joinmergedcols. We are not interested in joinmergedcols because we
always expand the column used in joins. There joinmergedcols is always 0
in our case.
For filling joinleftcols and joinrightcols we basically construct the
lists with sequences so either list is of the form: [1 2 3 4 .... n]
Ruleutils is not completed synced with postgres ruleutils and the most
important part is identify_join_columns function change, which now uses
joinleftcols and joinrightcols.
Commit on postgres side:
9ce77d75c5ab094637cc4a446296dc3be6e3c221
A useful email thread:
https://www.postgresql.org/message-id/flat/7115.1577986646%40sss.pgh.pa.us#0ae1d66feeb400013fbaa67a7cccd6ca
PG13 uses joinmergedcols, joinleftcols and joinrightcols for finding
join order now. There relevant fields are set on citus side.
Postgres side commit:
9ce77d75c5ab094637cc4a446296dc3be6e3c221
Since PG13 changed the list, a listcell doesn't contain data anymore.
Therefore Set_ptr_value macro is created, so that depending on the
version it will either use cell->data.ptr_value or cell->ptr_value.
Commit on Postgres side:
1cff1b95ab6ddae32faa3efe0d95a820dbfdc164
* Use CalculateUniformHashRangeIndex in HashPartitionId
INT32_MIN definition can change among different platforms hence it is
possible to get overflow, we would see crashes because of this in debian
distros. We have already solved a similar problem with introducing
CalculateUniformHashRangeIndex method, hence to solve it we can use the
same method, this also removes some duplication and has a single place
to decide that.
* Use PG_INT32_XX instead of INT32_XX to be safer
Teja Mupparti
aykut-bozkurt
Marco Slot
Naisila Puka
Jeff Davis
Marco Slot
Jelte Fennema
Onder Kalaci
Sait Talha Nisanci
Ahmet Gedemenli
Önder Kalacı
Onur Tirtir
Halil Ozan Akgul
Hanefi Onaldi