When we propogate the schema creation command to data nodes we add schema's
owner name too. Before this patch, we did not quote the owner's name which
causes problems with the names containing characters like '-'.
We incorrectly try to use relation cache to find particular schema's owner and
when we cannot find the schema in the relation cache(i.e always), we automatically
used current user as the schema's owner. This means we always created schemas in
the data nodes with current user. With this patch we started to use namespace
cache to find schemas.
With this commit, we start to use custom compiled PostgreSQL builds in
Travis for merge commits. This allows us to run isolation tests and
PostgreSQL's own regression tests along with our regression tests in
Travis.
Since manually compiling PostgreSQL takes more time and we also add new
tests, we only enable running these tests on merge commits.
* Accept invalidation messages before accessing the metadata cache
This commit is crucial to prevent stale metadata reads from the
cache. Without this commit, some of the operations may use stale
metadata which could end up with various bugs such as crashes,
inconsistent/lost data etc.
As an example, consider that a COPY operation is blocked on shard
metadata lock. Another concurrent session updates the metadata and
invalidates the cache. However, since Citus doesn't accept invalidations,
COPY continues with the stale metadata once it acquires the lock.
With this commit, we make sure that invalidation messages are accepted
just before accessing the metadata cache and preventing any operation to
use stale metadata.
* Add isolation tests for placement changes and conccurrent operations
- add node with reference table vs COPY/insert/update/DDL
- repair shard vs COPY/insert/update/DDL
- repair shard vs repair shard
Distributed query planning for subquery pushdown is done on the original
query. This prevents the usage of external parameters on the execution.
To overcome this, we manually replace the parameters on the original
query.
* Support for subqueries in WHERE clause
This commit enables subqueries in WHERE clause to be pushed down
by the subquery pushdown logic.
The support covers:
- Correlated subqueries with IN, NOT IN, EXISTS, NOT EXISTS,
operator expressions such as (>, <, =, ALL, ANY etc.)
- Non-correlated subqueries with (partition_key) IN (SELECT partition_key ..)
(partition_key) =ANY (SELECT partition_key ...)
Note that this commit heavily utilizes the attribute equivalence logic introduced
in the 1cb6a34ba8. In general, this commit mostly
adjusts the logical planner not to error out on the subqueries in WHERE clause.
* Improve error checks for subquery pushdown and INSERT ... SELECT
Since we allow subqueries in WHERE clause with the previous commit,
we should apply the same limitations to those subqueries.
With this commit, we do not iterate on each subquery one by one.
Instead, we extract all the subqueries and apply the checks directly
on those subqueries. The aim of this change is to (i) Simplify the
code (ii) Make it close to the checks on INSERT .. SELECT code base.
* Extend checks for unresolved paramaters to include SubLinks
With the presence of subqueries in where clause (i.e., SubPlans on the
query) the existing way for checking unresolved parameters fail. The
reason is that the parameters for SubPlans are kept on the parent plan not
on the query itself (see primnodes.h for the details).
With this commit, instead of checking SubPlans on the modified plans
we start to use originalQuery, where SubLinks represent the subqueries
in where clause. The unresolved parameters can be found on the SubLinks.
* Apply code-review feedback
* Remove unnecessary copying of shard interval list
This commit removes unnecessary copying of shard interval list. Note
that there are no copyObject function implemented for shard intervals.
- There was a crash when the table a shardid belonged to changed during
a session. Instead of crashing (a failed assert) we now throw an error
- Update the isolation test which was crashing to no longer exercise
that code path
- Add a regression test to check that the error is thrown
* Enabling physical planner for subquery pushdown changes
This commit applies the logic that exists in INSERT .. SELECT
planning to the subquery pushdown changes.
The main algorithm is followed as :
- pick an anchor relation (i.e., target relation)
- per each target shard interval
- add the target shard interval's shard range
as a restriction to the relations (if all relations
joined on the partition keys)
- Check whether the query is router plannable per
target shard interval.
- If router plannable, create a task
* Add union support within the JOINS
This commit adds support for UNION/UNION ALL subqueries that are
in the following form:
.... (Q1 UNION Q2 UNION ...) as union_query JOIN (QN) ...
In other words, we currently do NOT support the queries that are
in the following form where union query is not JOINed with
other relations/subqueries :
.... (Q1 UNION Q2 UNION ...) as union_query ....
* Subquery pushdown planner uses original query
With this commit, we change the input to the logical planner for
subquery pushdown. Before this commit, the planner was relying
on the query tree that is transformed by the postgresql planner.
After this commit, the planner uses the original query. The main
motivation behind this change is the simplify deparsing of
subqueries.
* Enable top level subquery join queries
This work enables
- Top level subquery joins
- Joins between subqueries and relations
- Joins involving more than 2 range table entries
A new regression test file is added to reflect enabled test cases
* Add top level union support
This commit adds support for UNION/UNION ALL subqueries that are
in the following form:
.... (Q1 UNION Q2 UNION ...) as union_query ....
In other words, Citus supports allow top level
unions being wrapped into aggregations queries
and/or simple projection queries that only selects
some fields from the lower level queries.
* Disallow subqueries without a relation in the range table list for subquery pushdown
This commit disallows subqueries without relation in the range table
list. This commit is only applied for subquery pushdown. In other words,
we do not add this limitation for single table re-partition subqueries.
The reasoning behind this limitation is that if we allow pushing down
such queries, the result would include (shardCount * expectedResults)
where in a non distributed world the result would be (expectedResult)
only.
* Disallow subqueries without a relation in the range table list for INSERT .. SELECT
This commit disallows subqueries without relation in the range table
list. This commit is only applied for INSERT.. SELECT queries.
The reasoning behind this limitation is that if we allow pushing down
such queries, the result would include (shardCount * expectedResults)
where in a non distributed world the result would be (expectedResult)
only.
* Change behaviour of subquery pushdown flag (#1315)
This commit changes the behaviour of the citus.subquery_pushdown flag.
Before this commit, the flag is used to enable subquery pushdown logic. But,
with this commit, that behaviour is enabled by default. In other words, the
flag is now useless. We prefer to keep the flag since we don't want to break
the backward compatibility. Also, we may consider using that flag for other
purposes in the next commits.
* Require subquery_pushdown when limit is used in subquery
Using limit in subqueries may cause returning incorrect
results. Therefore we allow limits in subqueries only
if user explicitly set subquery_pushdown flag.
* Evaluate expressions on the LIMIT clause (#1333)
Subquery pushdown uses orignal query, the LIMIT and OFFSET clauses
are not evaluated. However, logical optimizer expects these expressions
are already evaluated by the standard planner. This commit manually
evaluates the functions on the logical planner for subquery pushdown.
* Better format subquery regression tests (#1340)
* Style fix for subquery pushdown regression tests
With this commit we intented a more consistent style for the
regression tests we've added in the
- multi_subquery_union.sql
- multi_subquery_complex_queries.sql
- multi_subquery_behavioral_analytics.sql
* Enable the tests that are temporarily commented
This commit enables some of the regression tests that were commented
out until all the development is done.
* Fix merge conflicts (#1347)
- Update regression tests to meet the changes in the regression
test output.
- Replace Ifs with Asserts given that the check is already done
- Update shard pruning outputs
* Add view regression tests for increased subquery coverage (#1348)
- joins between views and tables
- joins between views
- union/union all queries involving views
- views with limit
- explain queries with view
* Improve btree operators for the subquery tests
This commit adds the missing comprasion for subquery composite key
btree comparator.
We previously dismissed this as unimportant, but it turns out to be
very useful for the upcoming subquery pushdown, where a user might
specify an equality constraint in a subquery, and the subquery
pushdown machinery adds >= and <= restrictions on the shard boundary.
Previously the latter restriction was ignored.
It semms that GEQO optimizations, when it is set to on, create their own memory context
and free it after when it is no longer necessary. In join multi_join_restriction_hook
we allocate our variables in the CurrentMemoryContext, which is GEQO's memory context
if it is active. To prevent deallocation of our variables when GEQO's memory context is
freed, we started to allocate memory fo these variables in separate MemoryContext.
So far citus used postgres' predicate proofing logic for shard
pruning, except for INSERT and COPY which were already optimized for
speed. That turns out to be too slow:
* Shard pruning for SELECTs is currently O(#shards), because
PruneShardList calls predicate_refuted_by() for every
shard. Obviously using an O(N) type algorithm for general pruning
isn't good.
* predicate_refuted_by() is quite expensive on its own right. That's
primarily because it's optimized for doing a single refutation
proof, rather than performing the same proof over and over.
* predicate_refuted_by() does not keep persistent state (see 2.) for
function calls, which means that a lot of syscache lookups will be
performed. That's particularly bad if the partitioning key is a
composite key, because without a persistent FunctionCallInfo
record_cmp() has to repeatedly look-up the type definition of the
composite key. That's quite expensive.
Thus replace this with custom-code that works in two phases:
1) Search restrictions for constraints that can be pruned upon
2) Use those restrictions to search for matching shards in the most
efficient manner available:
a) Binary search / Hash Lookup in case of hash partitioned tables
b) Binary search for equal clauses in case of range or append
tables without overlapping shards.
c) Binary search for inequality clauses, searching for both lower
and upper boundaries, again in case of range or append
tables without overlapping shards.
d) exhaustive search testing each ShardInterval
My measurements suggest that we are considerably, often orders of
magnitude, faster than the previous solution, even if we have to fall
back to exhaustive pruning.
This determines whether it's possible to perform binary search on
sortedShardIntervalArray or not. If e.g. two shards have overlapping
ranges, that'd be prohibitive.
That'll be useful in later commit introducing faster shard pruning.
That's useful when comparing values a hash-partitioned table is
filtered by. The existing shardIntervalCompareFunction is about
comparing hashed values, not unhashed ones.
The added btree opclass function is so we can get a comparator
back. This should be changed much more widely, but is not necessary so
far.
Previously we, unnecessarily, used a the first shard's type
information to to look up the comparison function. But that
information is already available, so use it. That's helpful because
we sometimes want to access the comparator function even if there's no
shards.
With this commit, we started to send explain queries within a savepoint. After
running explain query, we rollback to savepoint. This saves us from side effects
of EXPLAIN ANALYZE on DML queries.
All callers fetch a cache entry and extract/compute arguments for the
eventual FindShardInterval call, so it makes more sense to refactor
into that function itself; this solves the use-after-free bug, too.
Soon shard pruning will be optimized not to generally work linearly
anymore. Thus we can't print the pruned shard intervals as currently
done anymore.
The current printing of shard ids also prevents us from running tests
in parallel, as otherwise shard ids aren't linearly numbered.
Pretty straightforward. Had some concerns about locking, but due to the
fact that all distributed operations use either some level of deparsing
or need to enumerate column names, they all block during any concurrent
column renames (due to the AccessExclusive lock).
In addition, I had some misgivings about permitting renames of the dis-
tribution column, but nothing bad comes from just allowing them.
Finally, I tried to trigger any sort of error using prepared statements
and could not trigger any errors not also exhibited by plain PostgreSQL
tables.
With this change, we set to default value of isactive column to true so that
upgrading users all nodes will be marked as active to not break their environment.
With this change we add an option to add a node without replicating all reference
tables to that node. If a node is added with this option, we mark the node as
inactive and no queries will sent to that node.
We also added two new UDFs;
- master_activate_node(host, port):
- marks node as active and replicates all reference tables to that node
- master_add_inactive_node(host, port):
- only adds node to pg_dist_node
Before this commit, we were erroring out for queries containing parameterized SQL functions
like 'SELECT parameterized_sql_query(value)' as we should, however we were returning wrong
results for queries like 'SELECT * FROM parameterized_sql_query(value)'. With this commit
we started to error out on such queries too.
In this PR, we aim to deduce whether each of the RTE_RELATION
is joined with at least on another RTE_RELATION on their partition keys. If each
RTE_RELATION follows the above rule, we can conclude that all RTE_RELATIONs are
joined on their partition keys.
In order to do that, we invented a new equivalence class namely:
AttributeEquivalenceClass. In very simple words, a AttributeEquivalenceClass is
identified by an unique id and consists of a list of AttributeEquivalenceMembers.
Each AttributeEquivalenceMember is designed to identify attributes uniquely within the
whole query. The necessity of this arise since varno attributes are defined within
a single level of a query. Instead, here we want to identify each RTE_RELATION uniquely
and try to find equality among each RTE_RELATION's partition key.
Whenever we find an equality clause A = B, where both A and B originates from
relation attributes (i.e., not random expressions), we create an
AttributeEquivalenceClass to record this knowledge. If we later find another
equivalence B = C, we create another AttributeEquivalenceClass. Finally, we can
apply transitity rules and generate a new AttributeEquivalenceClass which includes
A, B and C.
Note that equality among the members are identified by the varattno and rteIdentity.
Each equality among RTE_RELATION is saved using an AttributeEquivalenceClass where
each member attribute is identified by a AttributeEquivalenceMember. In the final
step, we try generate a common attribute equivalence class that holds as much as
AttributeEquivalenceMembers whose attributes are a partition keys.
This was getting pretty long and complex in the context of the main
utility hook. Moved out the checks for what should skip Citus process-
ing and what should have version checks performed.
The use of a bare src/ rather than $srcdir caused configure to fail
during VPATH builds. With our additional dependency upon AWK, we need
to call AC_PROG_AWK, otherwise environments may not have $AWK set.
Finally, citus_version.h should be in .gitignore.
With this change, we start to error out if loaded citus binaries does not match
the available major version or installed citus extension version. In this case
we force user to restart the server or run ALTER EXTENSION depending on the
situation
Thought this looked slightly nicer than the default behavior.
Changed preventTransaction to concurrent to be clearer that this code
path presently affects CONCURRENTLY code only.
Coordinator code marks index as invalid as a base, set it as valid in a
transactional layer atop that base, then proceeds with worker commands.
If a worker command has problems, the rollback results in an index with
isvalid = false. If everything succeeds, the user sees a valid index.
Before this commit, in certain cases router planner allowed pushing
down JOINs that are not on the partition keys.
With @anarazel's suggestion, we change the logic to use uninstantiated
parameter. Previously, the planner was traversing on the restriction
information and once it finds the parameter, it was replacing it with
the shard range. With this commit, instead of traversing the restrict
infos, the planner explicitly checks for the equivalence of the relation
partition key with the uninstantiated parameter. If finds an equivalence,
it adds the restrictions. In this way, we have more control over the
queries that are pushed down.
Some tests relied on worker errors though local commands were invalid.
Fixed those by ensuring preconditions were met to have command work
correctly. Otherwise most test changes are related to slight changes
in local/remote error ordering.
When running under Enterprise, some of the GRANT commands and whatnot
are propagated. Guarding that section with a call to disable DDL prop.
fixes everything.
Jason Petersen
Burak Yucesoy
Önder Kalacı
Marco Slot
Metin Doslu
Marco Slot
Brian Cloutier
Andres Freund
Eren Basak
velioglu