Creating a second PR to make reviewing easier.
This PR tests:
- replicate_reference_tables
- fix_partition_shard_index_names
- isolate_tenant_to_new_shard
- replicate_table_shards
Adds Support for Single Shard Tables in
`update_distributed_table_colocation`.
This PR changes checks that make sure tables should be hash distributed
table to hash or single shard distributed tables.
Verify Citus UDFs work well with single shard tables
SUPPORTED
* citus_table_size
* citus_total_relation_size
* citus_relation_size
* citus_shard_sizes
* truncate_local_data_after_distributing_table
* create_distributed_function // test function colocated with a single
shard table
* undistribute_table
* alter_table_set_access_method
UNSUPPORTED - error out for single shard tables
* master_create_empty_shard
* create_distributed_table_concurrently
* create_distributed_table
* create_reference_table
* citus_add_local_table_to_metadata
* citus_split_shard_by_split_points
* alter_distributed_table
DESCRIPTION: Adds citus.enable_schema_based_sharding GUC that allows
sharding the database based on schemas when enabled.
* Refactor the logic that automatically creates Citus managed tables
* Refactor CreateSingleShardTable() to allow specifying colocation id
instead
* Add support for schema-based-sharding via a GUC
### What this PR is about:
Add **citus.enable_schema_based_sharding GUC** to enable schema-based
sharding. Each schema created while this GUC is ON will be considered
as a tenant schema. Later on, regardless of whether the GUC is ON or
OFF, any table created in a tenant schema will be converted to a
single shard distributed table (without a shard key). All the tenant
tables that belong to a particular schema will be co-located with each
other and will have a shard count of 1.
We introduce a new metadata table --pg_dist_tenant_schema-- to do the
bookkeeping for tenant schemas:
```sql
psql> \d pg_dist_tenant_schema
Table "pg_catalog.pg_dist_tenant_schema"
┌───────────────┬─────────┬───────────┬──────────┬─────────┐
│ Column │ Type │ Collation │ Nullable │ Default │
├───────────────┼─────────┼───────────┼──────────┼─────────┤
│ schemaid │ oid │ │ not null │ │
│ colocationid │ integer │ │ not null │ │
└───────────────┴─────────┴───────────┴──────────┴─────────┘
Indexes:
"pg_dist_tenant_schema_pkey" PRIMARY KEY, btree (schemaid)
"pg_dist_tenant_schema_unique_colocationid_index" UNIQUE, btree (colocationid)
psql> table pg_dist_tenant_schema;
┌───────────┬───────────────┐
│ schemaid │ colocationid │
├───────────┼───────────────┤
│ 41963 │ 91 │
│ 41962 │ 90 │
└───────────┴───────────────┘
(2 rows)
```
Colocation id column of pg_dist_tenant_schema can never be NULL even
for the tenant schemas that don't have a tenant table yet. This is
because, we assign colocation ids to tenant schemas as soon as they
are created. That way, we can keep associating tenant schemas with
particular colocation groups even if all the tenant tables of a tenant
schema are dropped and recreated later on.
When a tenant schema is dropped, we delete the corresponding row from
pg_dist_tenant_schema. In that case, we delete the corresponding
colocation group from pg_dist_colocation as well.
### Future work for 12.0 release:
We're building schema-based sharding on top of the infrastructure that
adds support for creating distributed tables without a shard key
(https://github.com/citusdata/citus/pull/6867).
However, not all the operations that can be done on distributed tables
without a shard key necessarily make sense (in the same way) in the
context of schema-based sharding. For example, we need to think about
what happens if user attempts altering schema of a tenant table. We
will tackle such scenarios in a future PR.
We will also add a new UDF --citus.schema_tenant_set() or such-- to
allow users to use an existing schema as a tenant schema, and another
one --citus.schema_tenant_unset() or such-- to stop using a schema as
a tenant schema in future PRs.
citus.tenant_stats_limit was set to 2 when we were adding tests for it.
Then we changed it to 10, making the tests incorrect.
This PR fixes that without breaking other tests.
Citus upgrade tests require some additional logic to run, because we
have a before and after schedule and we need to swap the Citus
version in-between. This adds that logic to `run_test.py`.
In passing this makes running upgrade tests locally multiple times
faster by caching tarballs.
DESCRIPTION: Fixes a crash when explain analyze is requested for a query
that is normally locally executed.
When explain analyze is requested for a query, a task with two queries
is created. Those two queries are
1. Wrapped Query --> `SELECT ... FROM
worker_save_query_explain_analyze(<query>, <explain analyze options>)`
2. Fetch Query -->` SELECT explain_analyze_output, execution_duration
FROM worker_last_saved_explain_analyze();`
When the query is locally executed a task with multiple queries causes a
crash in production. See the Assert at
57455dc64d/src/backend/distributed/executor/tuple_destination.c#:~:text=Assert(task%2D%3EqueryCount%20%3D%3D%201)%3B
This becomes a critical issue when auto_explain extension is used. When
auto_explain extension is enabled, explain analyze is automatically
requested for every query.
One possible solution could be not to create two queries for a locally
executed query. The fetch part may not have to be a query since the
values are available in local variables.
Until we enable local execution for explain analyze, it is best to
disable local execution.
Fixes#6777.
DESCRIPTION: Fixes a bug in background shard rebalancer where the
replicate reference tables task fails if the current user is not a
superuser.
This change is to be backported to earlier releases. We should fix the
permissions for replicate_reference_tables on main branch such that it
can be run by non-superuser roles.
Fixes#6925.
Fixes#6926.
I observed a flaky test output
[here](https://app.circleci.com/pipelines/github/citusdata/citus/32692/workflows/32464a22-7fd6-440a-9ff7-cfa62f9ff58a/jobs/1126144)
and added `ORDER BY` clauses to similar queries in the failing test
file.
```diff
SELECT pg_identify_object_as_address(classid, objid, objsubid) from pg_catalog.pg_dist_object where objid IN('viewsc.prop_view3'::regclass::oid, 'viewsc.prop_view4'::regclass::oid);
pg_identify_object_as_address
---------------------------------
- (view,"{viewsc,prop_view3}",{})
(view,"{viewsc,prop_view4}",{})
+ (view,"{viewsc,prop_view3}",{})
(2 rows)
```
Previously INSERT .. SELECT planner were pushing down some queries that should not be pushed down due to wrong colocation checks. It was checking whether one of the table in SELECT part and target table are colocated. But now, we check colocation for all tables in SELECT part and the target table.
Another problem with INSERT .. SELECT planner was that some queries, which is valid to be pushed down, were not pushed down due to unnecessary checks which are currently supported. e.g. UNION check. As solution, we reused the pushdown planner checks for INSERT .. SELECT planner.
DESCRIPTION: Fixes a bug that causes incorrectly pushing down some
INSERT .. SELECT queries that we shouldn't
DESCRIPTION: Prevents unnecessarily pulling the data into coordinator
for some INSERT .. SELECT queries
DESCRIPTION: Drops support for pushing down INSERT .. SELECT with append
table as target
Fixes#6749.
Fixes#1428.
Fixes#6920.
---------
Co-authored-by: aykutbozkurt <aykut.bozkurt1995@gmail.com>
We mark objects as distributed objects in Citus metadata only if we need
to propagate given the command that creates it to worker nodes. For this
reason, we were not doing this for the objects that are created while
pg_dist_node is empty.
One implication of doing so is that we defer the schema propagation to
the time when user creates the first distributed table in the schema.
However, this doesn't help for schema-based sharding (#6866) because we
want to sync pg_dist_tenant_schema to the worker nodes even for empty
schemas too.
* Support test dependencies for isolation tests without a schedule
* Comment out a test due to a known issue (#6901)
* Also, reduce the verbosity for some log messages and make some
tests compatible with run_test.py.
Fixes#6779.
DESCRIPTION: Disables citus.enable_non_colocated_router_query_pushdown
GUC by default to ensure generating a consistent distributed plan for
the queries that reference non-colocated distributed tables
We already have tests for the cases where this GUC is disabled,
so I'm not adding any more tests in this PR.
Also make multi_insert_select_window idempotent.
Related to: #6793
DESCRIPTION: Forward to existing emit_log_hook in our log hook
This makes us work better with other extensions installed in Postgres.
Without this change we would overwrite their emit_log_hook, causing it
to never be called.
Fixes#6874
When we bump columnar version, some tests fail because of the output
change. Instead of changing those lines every time, I think it is better
to normalize it in tests.
A test in background_rebalance_parallel.sql was failing intermittently
where the order of tasks in the output was not deterministic. This
commit fixes the test by removing id columns for the background tasks in
the output.
A sample failing diff before this patch is below:
```diff
SELECT D.task_id,
(SELECT T.command FROM pg_dist_background_task T WHERE T.task_id = D.task_id),
D.depends_on,
(SELECT T.command FROM pg_dist_background_task T WHERE T.task_id = D.depends_on)
FROM pg_dist_background_task_depend D WHERE job_id in (:job_id) ORDER BY D.task_id, D.depends_on ASC;
task_id | command | depends_on | command
---------+---------------------------------------------------------------------+------------+---------------------------------------------------------------------
- 1014 | SELECT pg_catalog.citus_move_shard_placement(85674026,50,57,'auto') | 1013 | SELECT pg_catalog.citus_move_shard_placement(85674025,50,56,'auto')
- 1016 | SELECT pg_catalog.citus_move_shard_placement(85674032,50,57,'auto') | 1015 | SELECT pg_catalog.citus_move_shard_placement(85674031,50,56,'auto')
- 1018 | SELECT pg_catalog.citus_move_shard_placement(85674038,50,57,'auto') | 1017 | SELECT pg_catalog.citus_move_shard_placement(85674037,50,56,'auto')
- 1020 | SELECT pg_catalog.citus_move_shard_placement(85674044,50,57,'auto') | 1019 | SELECT pg_catalog.citus_move_shard_placement(85674043,50,56,'auto')
+ 1014 | SELECT pg_catalog.citus_move_shard_placement(85674038,50,57,'auto') | 1013 | SELECT pg_catalog.citus_move_shard_placement(85674037,50,56,'auto')
+ 1016 | SELECT pg_catalog.citus_move_shard_placement(85674044,50,57,'auto') | 1015 | SELECT pg_catalog.citus_move_shard_placement(85674043,50,56,'auto')
+ 1018 | SELECT pg_catalog.citus_move_shard_placement(85674026,50,57,'auto') | 1017 | SELECT pg_catalog.citus_move_shard_placement(85674025,50,56,'auto')
+ 1020 | SELECT pg_catalog.citus_move_shard_placement(85674032,50,57,'auto') | 1019 | SELECT pg_catalog.citus_move_shard_placement(85674031,50,56,'auto')
(4 rows)
```
Notice that the dependent and dependee tasks have some commands, but
they have different task ids.
* Add support for dist insert select by selecting from a reference
table.
This was the only pushable insert .. select case that
#6773 didn't cover.
* For the cases where we insert into a Citus table but the INSERT ..
SELECT
query cannot be pushed down, allow pull-to-coordinator when possible.
Remove the checks that we had at the very beginning of
CreateInsertSelectPlanInternal so that we can try insert .. select via
pull-to-coordinator for the cases where we cannot push-down the insert
.. select query. What we support via pull-to-coordinator is still
limited due to lacking of logical planner support for SELECT queries,
but this commit at least allows using pull-to-coordinator for the cases
where the select query can be planned via router planner, without
limiting ourselves to restrictive top-level checks.
Also introduce some additional restrictions into
CreateDistributedInsertSelectPlan for the cases it was missing to check
for null-shard-key tables. Indeed, it would make more sense to have
those checks for distributed tables in general, via separate PRs against
main branch. See https://github.com/citusdata/citus/pull/6817.
* Add support for inserting into a Postgres table.
Enable router planner and a limited version of INSERT .. SELECT planner
for the queries that reference colocated null shard key tables.
* SELECT / UPDATE / DELETE / MERGE is supported as long as it's a router
query.
* INSERT .. SELECT is supported as long as it only references colocated
null shard key tables.
Note that this is not only limited to distributed INSERT .. SELECT but
also
covers a limited set of query types that require pull-to-coordinator,
e.g.,
due to LIMIT clause, generate_series() etc. ...
(Ideally distributed INSERT .. SELECT could handle such queries too,
e.g.,
when we're only referencing tables that don't have a shard key, but
today
this is not the case. See
https://github.com/citusdata/citus/pull/6773#discussion_r1140130562.
Add tests for ddl coverage:
* indexes
* partitioned tables + indexes with long names
* triggers
* foreign keys
* statistics
* grant & revoke statements
* truncate & vacuum
* create/test/drop view that depends on a dist table with no shard key
* policy & rls test
* alter table add/drop/alter_type column (using sequences/different data
types/identity columns)
* alter table add constraint (not null, check, exclusion constraint)
* alter table add column with a default value / set default / drop
default
* alter table set option (autovacuum)
* indexes / constraints without names
* multiple subcommands
Adds support for
* Creating new partitions after distributing (with null key) the parent
table
* Attaching partitions to a distributed table with null distribution key
(and automatically distribute the new partition with null key as well)
* Detaching partitions from it
With this PR, we allow creating distributed tables with without
specifying a shard key via create_distributed_table(). Here are the
the important details about those tables:
* Specifying `shard_count` is not allowed because it is assumed to be 1.
* We mostly call such tables as "null shard-key" table in code /
comments.
* To avoid doing a breaking layout change in create_distributed_table();
instead of throwing an error, it will inform the user that
`distribution_type`
param is ignored unless it's explicitly set to NULL or 'h'.
* `colocate_with` param allows colocating such null shard-key tables to
each other.
* We define this table type, i.e., NULL_SHARD_KEY_TABLE, as a subclass
of
DISTRIBUTED_TABLE because we mostly want to treat them as distributed
tables in terms of SQL / DDL / operation support.
* Metadata for such tables look like:
- distribution method => DISTRIBUTE_BY_NONE
- replication model => REPLICATION_MODEL_STREAMING
- colocation id => **!=** INVALID_COLOCATION_ID (distinguishes from
Citus local tables)
* We assign colocation groups for such tables to different nodes in a
round-robin fashion based on the modulo of "colocation id".
Note that this PR doesn't care about DDL (except CREATE TABLE) / SQL /
operation (i.e., Citus UDFs) support for such tables but adds a
preliminary
API.
When working on changelog, Marco suggested in
https://github.com/citusdata/citus/pull/6856#pullrequestreview-1386601215
that we should bump columnar version to 11.3 as well.
This PR aims to contain all the necessary changes to allow upgrades to
and downgrades from 11.3.0 for columnar. Note that updating citus
extension version does not affect columnar as the two extension versions
are not really coupled.
The same changes will also be applied to the release branch in
https://github.com/citusdata/citus/pull/6897
We are handling colocation groups with shard group count less than the
worker node count, using a method different than the usual rebalancer.
See #6739
While making the decision of using this method or not, we should've
ignored the nodes that are marked `shouldhaveshards = false`. This PR
excludes those nodes when making the decision.
Adds a test such that:
coordinator: []
worker 1: [1_1, 1_2]
worker 2: [2_1, 2_2]
(rebalance)
coordinator: []
worker 1: [1_1, 2_1]
worker 2: [1_2, 2_2]
If we take the coordinator into account, the rebalancer considers the
first state as balanced and does nothing (because shard_count <
worker_count)
But with this pr, we ignore the coordinator because it's
shouldhaveshards = false
So the rebalancer distributes each colocation group to both workers
Also, fixes an unrelated flaky test in the same file
We need to break sequence dependency for a table while creating the
table during non-transactional metadata sync to ensure idempotency of
the creation of the table.
**Problem:**
When we send `SELECT
pg_catalog.worker_drop_sequence_dependency(logicalrelid::regclass::text)
FROM pg_dist_partition` to workers during the non-transactional sync,
table might not be in `pg_dist_partition` at worker, and sequence
dependency is not broken at the worker.
**Solution:**
We break sequence dependency via `SELECT
pg_catalog.worker_drop_sequence_dependency(logicalrelid::regclass::text)`
for each table while creating it at the workers. It is safe to send
since the udf is a no-op when there is no sequence dependency.
DESCRIPTION: Fixes a bug related to sequence idempotency at
non-transactional sync.
Fixes https://github.com/citusdata/citus/issues/6888.
There was a bug related to regex. We sometimes caught the wrong line
when the test name is also included in comments.
Example: We caught the wrong line as multi_metadata_sync is included in
the comment before the test line.
```
# ----------
# multi_metadata_sync tests the propagation of mx-related metadata changes to metadata workers
# multi_unsupported_worker_operations tests that unsupported operations error out on metadata workers
# ----------
test: multi_metadata_sync
```
Solution: Restrict regex rule better.
In #6814 we started using the Python test runner for upgrade tests in
run_test.py, instead of the Perl based one. This had a problem though,
not all tests in minimal_schedule can be run with the Python runner.
This adds a separate minimal schedule for the pg_upgrade tests which
doesn't include the tests that break with the Python runner.
This PR also fixes various other issues that came up while testing
the upgrade tests.
- Query generator is used to create queries, allowed by the grammar which is documented at `query_generator/query_gen.py` (currently contains only joins).
- This PR adds a CI test which utilizes the query generator to compare the results of generated queries that are executed on Citus tables and local (undistributed) tables. It fails if there is an unexpected error at results. The error can be related to Citus, the query generator, or even Postgres.
- The tool is configured by the file `query_generator/config/config.yaml`, which limits table counts at generated queries and sets many table related parameters (e.g. row count).
- Run time of the CI task can be configured from the config file. By default, we run 250 queries with maximum table count of 40 inside each query.
`PlaceHolderVar` is not relevant to be processed inside a restriction
clause. Otherwise, `pull_var_clause_default` would throw error. PG would
create the restriction to physical `Var` that `PlaceHolderVar` points to
anyway, so it is safe to skip this restriction.
DESCRIPTION: Fixes a bug related to WHERE clause list which contains
placeholder.
Fixes https://github.com/citusdata/citus/issues/6758
DESCRIPTION: Changes the regression test setups adding the coordinator
to metadata by default.
When creating a Citus cluster, coordinator can be added in metadata
explicitly by running `citus_set_coordinator_host ` function. Adding the
coordinator to metadata allows to create citus managed local tables.
Other Citus functionality is expected to be unaffected.
This change adds the coordinator to metadata by default when creating
test clusters in regression tests.
There are 3 ways to run commands in a sql file (or a schedule which is a
sequence of sql files) with Citus regression tests. Below is how this PR
adds the coordinator to metadata for each.
1. `make <schedule_name>`
Changed the sql files (sql/multi_cluster_management.sql and
sql/minimal_cluster_management.sql) which sets up the test clusters such
that they call `citus_set_coordinator_host`. This ensures any following
tests will have the coordinator in metadata by default.
2. `citus_tests/run_test.py <sql_file_name>`
Changed the python code that sets up the cluster to always call `
citus_set_coordinator_host`.
For the upgrade tests, a version check is included to make sure
`citus_set_coordinator_host` function is available for a given version.
3. ` make check-arbitrary-configs `
Changed the python code that sets up the cluster to always call
`citus_set_coordinator_host `.
#6864 will be used to track the remaining work which is to change the
tests where coordinator is added/removed as a node.
This PR updates the tenant stats implementation to set partitionKeyValue
and colocationId in ExecuteLocalTaskListExtended, in addition to
LocallyExecuteTaskPlan. This ensures that tenant stats can be properly
gathered regardless of the code path taken. The changes were initially
made while testing stored procedure calls for tenant stats.
.. rather than having it in user facing functions. That way, we
can use the same logic for creating Citus tables from other places
too.
This would be useful for creating tenant tables via a simple function
call in the utility hook, for schema-based sharding purposes.
DESCRIPTION: Fixes memory errors, caught by valgrind, of type
"conditional jump or move depends on uninitialized value"
When running Citus tests under Postgres with valgrind, the test cases
calling into `NonBlockingShardSplit` function produce valgrind errors of
type "conditional jump or move depends on uninitialized value".
The issue is caused by creating a HTAB in a wrong way. HASH_COMPARE flag
should have been used when creating a HTAB with user defined comparison
function. In the absence of HASH_COMPARE flag, HTAB falls back into
built-in string comparison function. However, valgrind somehow discovers
that the match function is not assigned to the user defined function as
intended.
Fixes#6835
Fixes the bug that causes updating the citus_stat_tenants periods
incorrectly.
`TimestampDifferenceExceeds` expects the difference in milliseconds but
it was microseconds, this is fixed.
`tenantStats->lastQueryTime` was updated during monitoring too, now it's
updated only when there are tenant queries.
DESCRIPTION:
Makefile changes to build different versions of CDC decoder for different base decoders like pgoutput and wal2json with the same name and copy it to $packagelib/cdc_decoders dir. This helps the user to use logical replication slots normally with pgoutput without being aware of CDC decoder.
1) Changed src/backend/distributed/cdc/Makefile to setup a build directory
for CDC in build-cdc-$(DECODER) dir and copy the source files (.c.h and Makefile.decoder) to
the build dir and build it for each base decoder.
2) copy the pgoutput.so and wal2json.so into the above build dir and
install them in PG packagelibdir/citus_decoders directory.
3)Added a testcase 016_cdc_wal2json.pl for testing the wal2json decoder
using pg_recv_logical_changes function.
DESCRIPTION: Adds control for background task executors involving a node
### Background and motivation
Nonblocking concurrent task execution via background workers was
introduced in [#6459](https://github.com/citusdata/citus/pull/6459), and
concurrent shard moves in the background rebalancer were introduced in
[#6756](https://github.com/citusdata/citus/pull/6756) - with a hard
dependency that limits to 1 shard move per node. As we know, a shard
move consists of a shard moving from a source node to a target node. The
hard dependency was used because the background task runner didn't have
an option to limit the parallel shard moves per node.
With the motivation of controlling the number of concurrent shard
moves that involve a particular node, either as source or target, this
PR introduces a general new GUC
citus.max_background_task_executors_per_node to be used in the
background task runner infrastructure. So, why do we even want to
control and limit the concurrency? Well, it's all about resource
availability: because the moves involve the same nodes, extra
parallelism won’t make the rebalance complete faster if some resource is
already maxed out (usually cpu or disk). Or, if the cluster is being
used in a production setting, the moves might compete for resources with
production queries much more than if they had been executed
sequentially.
### How does it work?
A new column named nodes_involved is added to the catalog table that
keeps track of the scheduled background tasks,
pg_dist_background_task. It is of type integer[] - to store a list
of node ids. It is NULL by default - the column will be filled by the
rebalancer, but we may not care about the nodes involved in other uses
of the background task runner.
Table "pg_catalog.pg_dist_background_task"
Column | Type
============================================
job_id | bigint
task_id | bigint
owner | regrole
pid | integer
status | citus_task_status
command | text
retry_count | integer
not_before | timestamp with time zone
message | text
+nodes_involved | integer[]
A hashtable named ParallelTasksPerNode keeps track of the number of
parallel running background tasks per node. An entry in the hashtable is
as follows:
ParallelTasksPerNodeEntry
{
node_id // The node is used as the hash table key
counter // Number of concurrent background tasks that involve node node_id
// The counter limit is citus.max_background_task_executors_per_node
}
When the background task runner assigns a runnable task to a new
executor, it increments the counter for each of the nodes involved with
that runnable task. The limit of each counter is
citus.max_background_task_executors_per_node. If the limit is reached
for any of the nodes involved, this runnable task is skipped. And then,
later, when the running task finishes, the background task runner
decrements the counter for each of the nodes involved with the done
task. The following functions take care of these increment-decrement
steps:
IncrementParallelTaskCountForNodesInvolved(task)
DecrementParallelTaskCountForNodesInvolved(task)
citus.max_background_task_executors_per_node can be changed in the
fly. In the background rebalancer, we simply give {source_node,
target_node} as the nodesInvolved input to the
ScheduleBackgroundTask function. The rest is taken care of by the
general background task runner infrastructure explained above. Check
background_task_queue_monitor.sql and
background_rebalance_parallel.sql tests for detailed examples.
#### Note
This PR also adds a hard node dependency if a node is first being used
as a source for a move, and then later as a target. The reason this
should be a hard dependency is that the first move might make space for
the second move. So, we could run out of disk space (or at least
overload the node) if we move the second shard to it before the first
one is moved away.
Fixes https://github.com/citusdata/citus/issues/6716
DESCRIPTION: PR description that will go into the change log, up to 78
characters
---------
Co-authored-by: Hanefi Onaldi <Hanefi.Onaldi@microsoft.com>
Fixes flakiness in multi_metadata_sync test
https://app.circleci.com/pipelines/github/citusdata/citus/31863/workflows/ea937480-a4cc-4646-815c-bb2634361d98/jobs/1074457
```diff
SELECT
logicalrelid, repmodel
FROM
pg_dist_partition
WHERE
logicalrelid = 'mx_test_schema_1.mx_table_1'::regclass
OR logicalrelid = 'mx_test_schema_2.mx_table_2'::regclass;
logicalrelid | repmodel
-----------------------------+----------
- mx_test_schema_1.mx_table_1 | s
mx_test_schema_2.mx_table_2 | s
+ mx_test_schema_1.mx_table_1 | s
(2 rows)
```
This is a simple issue of missing `ORDER BY` clauses. I went ahead and
added some other missing ones in the same file as well. Also, I replaced
existing `ORDER BY logicalrelid` with `ORDER BY logicalrelid::text`, in
order to compare names, not OIDs.
DESCRIPTION: Adds views that monitor statistics on tenant usages
This PR adds `citus_stats_tenants` view that monitors the tenants on the
cluster.
`citus_stats_tenants` shows the node id, colocation id, tenant
attribute, read count in this period and last period, and query count in
this period and last period of the tenant.
Tenant attribute currently is the tenant's distribution column value,
later when schema based sharding is introduced, this meaning might
change.
A period is a time bucket the queries are counted by. Read and query
counts for this period can increase until the current period ends. After
that those counts are moved to last period's counts, which cannot
change. The period length can be set using 'citus.stats_tenants_period'.
`SELECT` queries are counted as _read_ queries, `INSERT`, `UPDATE` and
`DELETE` queries are counted as _write_ queries. So in the view read
counts are `SELECT` counts and query counts are `SELECT`, `INSERT`,
`UPDATE` and `DELETE` count.
The data is stored in shared memory, in a struct named
`MultiTenantMonitor`.
`citus_stats_tenants` shows the data from local tenants.
`citus_stats_tenants` show up to `citus.stats_tenant_limit` number of
tenants.
The tenants are scored based on the number of queries they run and the
recency of those queries. Every query ran increases the score of tenant
by `ONE_QUERY_SCORE`, and after every period ends the scores are halved.
Halving is done lazily.
To retain information a longer the monitor keeps up to 3 times
`citus.stats_tenant_limit` tenants. When the tenant count hits `3 *
citus.stats_tenant_limit`, last `citus.stats_tenant_limit` tenants are
removed. To see all stored tenants you can use
`citus_stats_tenants(return_all_tenants := true)`
- [x] Create collector view that gets data from all nodes. #6761
- [x] Add monitoring log #6762
- [x] Create enable/disable GUC #6769
- [x] Parse the annotation string correctly #6796
- [x] Add local queries and prepared statements #6797
- [x] Rename to citus_stat_statements #6821
- [x] Run pgbench
- [x] Fix role permissions #6812
---------
Co-authored-by: Gokhan Gulbiz <ggulbiz@gmail.com>
Co-authored-by: Jelte Fennema <github-tech@jeltef.nl>
Over the last few months run_test.py got more and more complex. This
refactors the code in `run_test.py` to be better understandable. Mostly
this splits up separate pieces of logic into separate functions.
In CI we would sometimes get this failure:
```diff
-- The original shard is marked for deferred drop with policy_type = 2.
-- The previous shard should be dropped at the beginning of the second split call
SELECT * from pg_dist_cleanup;
record_id | operation_id | object_type | object_name | node_group_id | policy_type
-----------+--------------+-------------+--------------------------------------------------------------------------+---------------+-------------
+ 60 | 778 | 3 | citus_shard_split_slot_18_21216_778 | 16 | 0
512 | 778 | 1 | citus_split_shard_by_split_points_deferred_schema.table_to_split_8981001 | 16 | 2
-(1 row)
+(2 rows)
```
Replication slots sometimes cannot be deleted right away. Which is hard
to resolve, but luckily we can filter these cleanup records out easily
by filtering by policy_type.
While debugging this issue I learnt that we did not use
`GetNextCleanupRecordId` in all places where we created cleanup
records. This caused test failures when running tests multiple times,
when they set `citus.next_cleanup_record_id`. I tried fixing that by
calling GetNextCleanupRecordId in all places but that caused many
other tests to fail due to deadlocks. So, instead this adresses
that issue by using `ALTER SEQUENCE ... RESTART` instead of
`citus.next_cleanup_record_id`. In a follow up PR we should
probably get rid of `citus.next_cleanup_record_id`, since it's
only used in one other file.
DESCRIPTION: Fix an issue that caused some queries with custom
aggregates to fail
While playing around with https://github.com/pgvector/pgvector I noticed
that the AVG query was broken. That's because we treat it as any other
AVG by breaking it down in SUM and COUNT, but there are no SUM/COUNT
functions in this case, but there is a perfectly usable combinefunc.
This PR changes our aggregate logic to prefer custom aggregates with a
combinefunc even if they have a common name.
Co-authored-by: Marco Slot <marco.slot@gmail.com>
DESCRIPTION:
- The CDC decoder is refacroted into a seperate extension that can be used loaded dynamically without having to reload citus.
- CDC decoder code can be compiled using DECODER flag to work with different decoders like pgoutput and wal2json.
by default the base decode is "pgoutput".
- the dynamic_library_path config is adjusted dynamically to prefer the decoders in cdc_decoders directory in citus init
so that the users can use the replication subscription commands without having to make any config changes.
DESCRIPTION: Refactor and unify shard move and copy functions
Shard move and copy functions share a lot of code in common. This PR
unifies these functions into one, along with some helper functions. To
preserve the current behavior, we'll introduce and use an enum
parameter, and hardcoded strings for producing error/warning messages.
For some tests such as upgrade tests and arbitrary config tests we set
up the citus cluster using Python. This setup is slightly different from
the perl based setup script (`multi_regress.pl`). Most importantly it
uses replication factor 1 by default.
This changes our run_test.py script to be able to run a schedule using
python instead of `multi_regress.pl`, for the tests that require it.
For now arbitrary config tests are still not runnable with
`run_test.py`, but this brings us one step closer to being able to do
that.
Fixes#6804
Having as little Perl as possible in our repo seems a worthy goal. Sadly
Postgres its Perl based TAP infrastructure was the only way in which we
could
run tests that were hard to do using only SQL commands. This change adds
infrastructure to run such "application style tests" using python and
converts all our existing Perl TAP tests to this new infrastructure.
Some of the helper functions that are added in this PR are currently
unused. Most of these will be used by the CDC PR that depends on this.
Some others are there because they were needed by the PgBouncer test
framework that this is based on, and the functions seemed useful enough
to citus testing to keep.
The main features of the test suite are:
1. Application style tests using a programming language that our
developers know how to write.
2. Caching of Citus clusters in-between tests using the ["fixture"
pattern][fixture] from `pytest` to achieve speedy tests. To make this
work in practice any changes made during a test are automatically
undone. Schemas, replication slots, subscriptions, publications are
dropped at the end of each test. And any changes made by `ALTER SYSTEM`
or manually editing of `pg_hba.conf` are undone too.
3. Automatic parallel execution of tests using the `-n auto` flag that's
added by `pytest-xdist`. This improved the speed of tests greatly with
the similar test framework I created for PgBouncer. Right now it doesn't
help much yet though, since this PR only adds two tests (one of which
takes ~10 times longer than the other).
Possible future improvements are:
1. Clean up even more things at the end of each test (e.g. users that
were created). These are fairly easy to add, but I have not done so yet
since they were not needed yet for this PR or the CDC PR. So I would not
be able to test the cleanup easily.
2. Support for query block detection similar to what we can now do using
isolation tests.
[fixture]: https://docs.pytest.org/en/6.2.x/fixture.html
Add new metadata sync methods which uses MemorySyncContext api so that during the sync we can
- free memory to prevent OOM,
- use either transactional or nontransactional modes according to the GUC .
- Create MetadataSyncContext api to encapsulate
both transactional and nontransactional modes,
- Add a GUC to switch between metadata sync transaction modes.
This pull request proposes a change to the logic used for propagating
identity columns to worker nodes in citus. Instead of creating a
dependent sequence for each identity column and changing its default
value to `nextval(seq)/worker_nextval(seq)`, this update will pass the
identity columns as-is to the worker nodes.
Please note that there are a few limitations to this change.
1. Only bigint identity columns will be allowed in distributed tables to
ensure compatibility with the DDL from any node functionality. Our
current distributed sequence implementation only allows insert
statements from all nodes for bigint sequences.
2. `alter_distributed_table` and `undistribute_table` operations will
not be allowed for tables with identity columns. This is because we do
not have a proper way of keeping sequence states consistent across the
cluster.
DESCRIPTION: Prevents using identity columns on data types other than
`bigint` on distributed tables
DESCRIPTION: Prevents using `alter_distributed_table` and
`undistribute_table` UDFs when a table has identity columns
DESCRIPTION: Fixes a bug that prevents enforcing identity column
restrictions on worker nodes
Depends on #6740Fixes#6694
DESCRIPTION: This PR removes the task dependencies between shard moves
for which the shards belong to different colocation groups. This change
results in scheduling multiple tasks in the RUNNABLE state. Therefore it
is possible that the background task monitor can run them concurrently.
Previously, all the shard moves planned in a rebalance operation took
dependency on each other sequentially.
For instance, given the following table and shards
colocation group 1 colocation group 2
table1 table2 table3 table4 table 5
shard11 shard21 shard31 shard41 shard51
shard12 shard22 shard32 shard42 shard52
if the rebalancer planner returned the below set of moves
` {move(shard11), move(shard12), move(shard41), move(shard42)}`
background rebalancer scheduled them such that they depend on each other
sequentially.
```
{move(reftables) if there is any, none}
|
move( shard11)
|
move(shard12)
| {move(shard41)<--- move(shard12)} This is an artificial dependency
move(shard41)
|
move(shard42)
```
This results in artificial dependencies between otherwise independent
moves.
Considering that the shards in different colocation groups can be moved
concurrently, this PR changes the dependency relationship between the
moves as follows:
```
{move(reftables) if there is any, none} {move(reftables) if there is any, none}
| |
move(shard11) move(shard41)
| |
move(shard12) move(shard42)
```
---------
Co-authored-by: Jelte Fennema <jelte.fennema@microsoft.com>
Description:
Implementing CDC changes using Logical Replication to avoid
re-publishing events multiple times by setting up replication origin
session, which will add "DoNotReplicateId" to every WAL entry.
- shard splits
- shard moves
- create distributed table
- undistribute table
- alter distributed tables (for some cases)
- reference table operations
The citus decoder which will be decoding WAL events for CDC clients,
ignores any WAL entry with replication origin that is not zero.
It also maps the shard names to distributed table names.
Today we allow planning the queries that reference non-colocated tables
if the shards that query targets are placed on the same node. However,
this may not be the case, e.g., after rebalancing shards because it's
not guaranteed to have those shards on the same node anymore.
This commit adds citus.enable_non_colocated_router_query_pushdown GUC
that can be used to disallow planning such queries via router planner,
when it's set to false. Note that the default value for this GUC will be
"true" for 11.3, but we will alter it to "false" on 12.0 to not
introduce
a breaking change in a minor release.
Closes#692.
Even more, allowing such queries to go through router planner also
causes
generating an incorrect plan for the DML queries that reference
distributed
tables that are sharded based on different replication factor settings.
For
this reason, #6779 can be closed after altering the default value for
this
GUC to "false", hence not now.
DESCRIPTION: Adds `citus.enable_non_colocated_router_query_pushdown` GUC
to ensure generating a consistent distributed plan for the queries that
reference non-colocated distributed tables (when set to "false", the
default is "true").
Soon I will be doing some changes related to #692 in router planner
and those changes require updating ~5/6 tests related to router
planning. And to make those test files runnable by run_test.py
multiple times, we need to make some other tests (that they're
run in parallel / they badly depend on) ready for run_test.py too.
Because they're only interested in distributed tables. Even more,
this replaces HasDistributionKey() check with
IsCitusTableType(DISTRIBUTED_TABLE) because this doesn't make a
difference on main and sounds slightly more intuitive. Plus, this
would also allow safely using this function in
https://github.com/citusdata/citus/pull/6773.
This would be useful for testing #6773. This is because, given that
#6773
only adds support for router / fast-path queries, theoretically almost
all
the tests that we have in that test file should work for null-shard-key
tables too (and they indeed do).
I deliberately did not replace multi_router_planner_fast_path.sql with
the one that I'm adding into arbitrary configs because we might still
want to see when we're able to go through fast-path planning for the
usual distributed tables (the ones that have a shard key).
DESCRIPTION: Check before logicalrep for rebalancer, error if needed
Check if we can use logical replication or not, in case of shard
transfer mode = auto, before executing the shard moves. If we can't,
error out. Before this PR, we used to error out in the middle of shard
moves:
```sql
set citus.shard_count = 4; -- just to get the error sooner
select citus_remove_node('localhost',9702);
create table t1 (a int primary key);
select create_distributed_table('t1','a');
create table t2 (a bigint);
select create_distributed_table('t2','a');
select citus_add_node('localhost',9702);
select rebalance_table_shards();
NOTICE: Moving shard 102008 from localhost:9701 to localhost:9702 ...
NOTICE: Moving shard 102009 from localhost:9701 to localhost:9702 ...
NOTICE: Moving shard 102012 from localhost:9701 to localhost:9702 ...
ERROR: cannot use logical replication to transfer shards of the relation t2 since it doesn't have a REPLICA IDENTITY or PRIMARY KEY
```
Now we check and error out in the beginning, without moving the shards.
fixes: #6727
ci/fix_styles.sh were complaining about `black` and `isort` packages are
not found even if I `pipenv install --dev` due to broken lock file. I
regenerated the lock file and now it works fine. We also wanted to
upgrade required python version for the pipfile.
Fixes#6672
2) Move all MERGE related routines to a new file merge_planner.c
3) Make ConjunctionContainsColumnFilter() static again, and rearrange the code in MergeQuerySupported()
4) Restore the original format in the comments section.
5) Add big serial test. Implement latest set of comments
This implements the phase - II of MERGE sql support
Support routable query where all the tables in the merge-sql are distributed, co-located, and both the source and
target relations are joined on the distribution column with a constant qual. This should be a Citus single-task
query. Below is an example.
SELECT create_distributed_table('t1', 'id');
SELECT create_distributed_table('s1', 'id', colocate_with => ‘t1’);
MERGE INTO t1
USING s1 ON t1.id = s1.id AND t1.id = 100
WHEN MATCHED THEN
UPDATE SET val = s1.val + 10
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED THEN
INSERT (id, val, src) VALUES (s1.id, s1.val, s1.src)
Basically, MERGE checks to see if
There are a minimum of two distributed tables (source and a target).
All the distributed tables are indeed colocated.
MERGE relations are joined on the distribution column
MERGE .. USING .. ON target.dist_key = source.dist_key
The query should touch only a single shard i.e. JOIN AND with a constant qual
MERGE .. USING .. ON target.dist_key = source.dist_key AND target.dist_key = <>
If any of the conditions are not met, it raises an exception.
(cherry picked from commit 44c387b978)
This implements MERGE phase3
Support pushdown query where all the tables in the merge-sql are Citus-distributed, co-located, and both
the source and target relations are joined on the distribution column. This will generate multiple tasks
which execute independently after pushdown.
SELECT create_distributed_table('t1', 'id');
SELECT create_distributed_table('s1', 'id', colocate_with => ‘t1’);
MERGE INTO t1
USING s1
ON t1.id = s1.id
WHEN MATCHED THEN
UPDATE SET val = s1.val + 10
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED THEN
INSERT (id, val, src) VALUES (s1.id, s1.val, s1.src)
*The only exception for both the phases II and III is, UPDATEs and INSERTs must be done on the same shard-group
as the joined key; for example, below scenarios are NOT supported as the key-value to be inserted/updated is not
guaranteed to be on the same node as the id distribution-column.
MERGE INTO target t
USING source s ON (t.customer_id = s.customer_id)
WHEN NOT MATCHED THEN - -
INSERT(customer_id, …) VALUES (<non-local-constant-key-value>, ……);
OR this scenario where we update the distribution column itself
MERGE INTO target t
USING source s On (t.customer_id = s.customer_id)
WHEN MATCHED THEN
UPDATE SET customer_id = 100;
(cherry picked from commit fa7b8949a8)
In #6720 I'm adding a `pytest` based testing framework. This adds the
dependencies for those. They have already been [merged into our docker
files][the-process-merge] in the the-process repo preparation for #6720.
But by not having them on our citus main branch it is impossible to
make changes to the Pipfile, because our CI Dockerfiles and master
are out of date.
Since #6720 will need some more discussion and might take a few more
weeks to be merged, this takes out the Pipfile changes. By merging this
PR we can unblock new Pipfile changes.
Unblocks and partially addresses #6766
[the-process-merge]: https://github.com/citusdata/the-process/pull/117
In the past, having columnar tables in the cluster was causing pg
upgrades to fail when attempting to access columnar metadata. This is
because, pg_dump doesn't see objects that we use for columnar-am related
booking as the dependencies of the tables using columnar-am.
To fix that; in #5456, we inserted some "normal dependency" edges (from
those objects to columnar-am) into pg_depend.
This helped us ensuring the existency of a class of metadata objects
--such as columnar.storageid_seq-- and helped fixing #5437.
However, the normal-dependency edges that we added for indexes on
columnar metadata tables --such columnar.stripe_pkey-- didn't help at
all because they were indeed causing dependency loops (#5510) and
pg_dump was not able to take those dependency edges into the account.
For this reason, this commit deletes those dependency edges so that
pg_dump stops complaining about them. Note that it's not critical to
delete those edges from pg_depend since they're not breaking pg upgrades
but were triggering some warning messages. And given that backporting
a sql change into older versions is hard a lot, we skip backporting
this.
This commit hides port numbers in upgrade_columnar_after because the
port numbers assigned to nodes in upgrade schedule differ from the ones
that flaky test detector assigns.
When run_test.py is run for an upgrade_.*_after.sql then, then
automatically run the corresponding uprade_.*_before.sql file first.
This is because all those upgrade_.*_after.sql files depend on the
objects created in upgrade_.*_before.sql files by definition.
Decide core distribution params in CreateCitusTable to reduce the
chances of
creating Citus tables based on incorrect combinations of distribution
method
and replication model params.
Also introduce DistributedTableParams struct to encapsulate the
parameters
that are specific to distributed tables.
So that we can run the tests that require fake_fdw by using minimal
schedule too.
Also move multi_create_fdw.sql up in multi_1_schedule to make it
available to more tests.
Now that we will soon add another table type having DISTRIBUTE_BY_NONE
as distribution method and that we want the code to interpret such
tables mostly as distributed tables, let's make the definition of those
other two table types more strict by removing
CITUS_TABLE_WITH_NO_DIST_KEY
macro.
And instead, use HasDistributionKey() check in the places where the
logic applies to all table types that have / don't have a distribution
key. In future PRs, we might want to convert some of those
HasDistributionKey() checks if logic only applies to Citus local /
reference tables, not the others.
And adding HasDistributionKey() also allows us to consider having
DISTRIBUTE_BY_NONE as the distribution method as a "table attribute"
that can apply to distributed tables too, rather something that
determines the table type.
Split the main logic that allows creating a Citus table into the
internal function CreateCitusTable().
Old CreateDistributedTable() function was assuming that it's creating
a reference table when the distribution method is DISTRIBUTE_BY_NONE.
However, soon this won't be the case when adding support for creating
single-shard distributed tables because their distribution method would
also be the same.
Now the internal method CreateCitusTable() doesn't make any assumptions
about table's replication model or such. Instead, it expects callers to
properly set all such metadata bits.
Even more, some of the parameters the old CreateDistributedTable() takes
--such as the shard count-- were not meaningful for a reference table,
and would be the same as for new table type.
DESCRIPTION: Fixes a bug in shard copy operations.
For copying shards in both shard move and shard split operations, Citus
uses the COPY statement.
A COPY all statement in the following form
` COPY target_shard FROM STDIN;`
throws an error when there is a GENERATED column in the shard table.
In order to fix this issue, we need to exclude the GENERATED columns in
the COPY and the matching SELECT statements. Hence this fix converts the
COPY and SELECT all statements to the following form:
```
COPY target_shard (col1, col2, ..., coln) FROM STDIN;
SELECT (col1, col2, ..., coln) FROM source_shard;
```
where (col1, col2, ..., coln) does not include a GENERATED column.
GENERATED column values are created in the target_shard as the values
are inserted.
Fixes#6705.
---------
Co-authored-by: Teja Mupparti <temuppar@microsoft.com>
Co-authored-by: aykut-bozkurt <51649454+aykut-bozkurt@users.noreply.github.com>
Co-authored-by: Jelte Fennema <jelte.fennema@microsoft.com>
Co-authored-by: Gürkan İndibay <gindibay@microsoft.com>
DESCRIPTION: Adds logic to distribute unbalanced shards
If the number of shard placements (for a colocation group) is less than
the number of workers, it means that some of the workers will remain
empty. With this PR, we consider these shard groups as a colocation
group, in order to make them be distributed evenly as much as possible
across the cluster.
Example:
```sql
create table t1 (a int primary key);
create table t2 (a int primary key);
create table t3 (a int primary key);
set citus.shard_count =1;
select create_distributed_table('t1','a');
select create_distributed_table('t2','a',colocate_with=>'t1');
select create_distributed_table('t3','a',colocate_with=>'t2');
create table tb1 (a bigint);
create table tb2 (a bigint);
select create_distributed_table('tb1','a');
select create_distributed_table('tb2','a',colocate_with=>'tb1');
select citus_add_node('localhost',9702);
select rebalance_table_shards();
```
Here we have two colocation groups, each with one shard group. Both
shard groups are placed on the first worker node. When we add a new
worker node and try to rebalance table shards, the rebalance planner
considers it well balanced and does nothing. With this PR, the
rebalancer tries to distribute these shard groups evenly across the
cluster as much as possible. For this example, with this PR, the
rebalancer moves one of the shard groups to the second worker node.
fixes: #6715
DESCRIPTION: Correctly report shard size in citus_shards view
When looking at citus_shards, people are interested in the actual size
that all the data related to the shard takes up on disk.
`pg_total_relation_size` is the function to use for that purpose. The
previously used `pg_relation_size` does not include indexes or TOAST.
Especially the missing toast can have enormous impact on the size of the
shown data.
With this small change, arbitrary config tests can have multiple acceptable correct outputs.
For an arbitrary config tests named `t`, now you can define `expected/t.out`, `expected/t_0.out`, `expected/t_1.out` etc and the test will succeed if the output of `sql/t.sql` is equal to any of the `t.out` or `t_{0, 1, ...}.out` files.
First of all, this commit sets next_shard_id for
single_node_truncate.sql because shard ids in the test output were
changing whenever we modify a prior test file.
Then the flaky test detector started complaining about
single_node_truncate.sql. We fix that by specifying the correct
test dependency for it in run_test.py.
2 improvements to prevent memory leaks during altering or undistributing
distributed tables with a lot of partitions and shards:
1. Free memory for each call to ConvertTable so that colocated and partition tables at
`AlterDistributedTable`, `UndistributeTable`, or
`AlterTableSetAccessMethod` will not cause an increase
in memory usage,
2. Free memory while executing attach partition commands for each partition table at
`AlterDistributedTable` to prevent an increase in memory usage.
DESCRIPTION: Fixes memory leak issue during altering distributed table
with a lot of partition and shards.
Fixes https://github.com/citusdata/citus/issues/6503.
In #6718 I accidentally added Python type hint syntax that was only
supported on Python 3.10. Our CI uses 3.9, so this PR changes that to a
syntax that's supported on 3.9 too.
We have memory leak during distribution of a table with a lot of
partitions as we do not release memory at ExprContext until all
partitions are not distributed. We improved 2 things to resolve the
issue:
1. We create and delete MemoryContext for each call to
`CreateDistributedTable` by partitions,
2. We rebuild the cache after we insert all the placements instead of
each placement for a shard.
DESCRIPTION: Fixes memory leak during distribution of a table with a lot
of partitions and shards.
Fixes https://github.com/citusdata/citus/issues/6572.
When auto_explain module is loaded and configured, EXPLAIN will be
implicitly run for all the supported commands. Postgres does not support
`EXPLAIN` for `ALTER` command. However, auto_explain will try to
`EXPLAIN` other supported commands internally triggered by `ALTER`.
For instance,
`ALTER TABLE target_table ADD CONSTRAINT fkey_167 FOREIGN KEY (col_1)
REFERENCES ref_table(key) ... `
command may trigger a SELECT command in the following form for foreign
key validation purpose:
`SELECT fk.col_1 FROM ONLY target_table fk LEFT OUTER JOIN ONLY
ref_table pk ON ( pk.key OPERATOR(pg_catalog.=) fk.col_1) WHERE pk.key
IS NULL AND (fk.col_1 IS NOT NULL) `
For Citus tables, the Citus utility hook should ensure that constraint
validation is skipped for shell tables but they are done for shard
tables. The reason behind this design choice can be summed up as:
- An ALTER TABLE command via coordinator node is run in a distributed
transaction.
- Citus does not support nested distributed transactions.
- A SELECT query on a distributed table (aka shell table) is also run in
a distributed transaction.
- Therefore, Citus does not support running a SELECT query on a shell
table while an ALTER TABLE command is running.
With
eadc88a800
a bug is introduced breaking the skip constraint validation behaviour of
Citus. With this change, we see that validation queries on distributed
tables are triggered within `ALTER` command adding constraints with
validation check. This regression did not cause an issue for regular use
cases since the citus executor hook blocks those queries heuristically
when there is an ALTER TABLE command in progress.
The issue is surfaced as a crash (#6424 Workers, when configured to use
auto_explain, crash during distributed transactions.) when auto_explain
is enabled. This is due to auto_explain trying to execute the SELECT
queries in a nested distributed transaction.
Now since the regression with constraint validation is fixed in
https://github.com/citusdata/citus/issues/6543, we should be able to
remove the workaround.
We should not omit to free PGResult when we receive single tuple result
from an internal backend.
Single tuple results are normally freed by our ReceiveResults for
`tupleDescriptor != NULL` flow but not for those with `tupleDescriptor
== NULL`. See PR #6722 for details.
DESCRIPTION: Fixes memory leak issue with query results that returns
single row.
O Simple fix is to add ORDER BY to have definitive results.
O Add search_path explicitly after reconnecting, this avoids creating objects in public schema
which prevents us from repetitive running of tests.
O multi_mx_modification is not designed to run repetitive, so isolate it.
Some of our tests depend on previous tests. Normally all these tests
should be part of a base schedule, but that's not always the case. The
flaky test detection script should ensure that we don't introduce other
dependencies by accident in new tests. But we have many old tests that
are not worth the effort of changing. This adds a way to define such
test dependencies in `run_test.py`, so that it can make sure to run any
dependencies before the actual test.
Our repo was complaining about the cryptography package being
vulnerable. This updates it, including our mitmproxy fork, because that
was pinning an outdated version.
Relevant commit on our mitmproxy fork:
2fd18ef051
Relevant PR on the-process:
https://github.com/citusdata/the-process/pull/112
Prevents memory leak during ConvertTable call for a table with a lot of
partitions.
DESCRIPTION: Fixes memory leak during undistribution and alteration of a
table with a lot of partitions.
Postgres got minor updates this starts using the images with the latest
version for our tests.
These new Postgres versions caused a compilation issue in PG14 and PG13
due to some function being backported that we had already backported
ourselves. Due this backport being a static inline function it doesn't
matter who provides this and there will be no linkage errors when either
running old Citus packages on new PG versions or the other way around.
The failure_create_distributed_table_non_empty test would sometimes fail
like this:
```diff
-- in the first test, cancel the first connection we sent from the coordinator
SELECT citus.mitmproxy('conn.cancel(' || pg_backend_pid() || ')');
- mitmproxy
----------------------------------------------------------------------
-
-(1 row)
-
+ERROR: canceling statement due to user request
+CONTEXT: COPY mitmproxy_result, line 0
+SQL statement "COPY mitmproxy_result FROM '/home/circleci/project/src/test/regress/tmp_check/mitmproxy.fifo'"
+PL/pgSQL function citus.mitmproxy(text) line 11 at EXECUTE
SELECT create_distributed_table('test_table', 'id');
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/30474/workflows/be1c9f9d-22c9-465c-964a-dcdd1cb8c99c/jobs/985441
Because the cancel command had no filter it would actually sometimes
cancel the mitmproxy cancel command itself. This PR addresses that by
simply removing this test.
This is basically the exact same issue as #6217, only in a different
place in the file. It's fixed here by removing the test since there's
already many different similar tests.
In #6314 I refactored the connection cleanup to be simpler to
understand and use. However, by doing so I introduced a use-after-free
possibility (that valgrind luckily picked up):
In the `ShouldShutdownConnection` path of
`AfterXactHostConnectionHandling`
we free connections without removing the `transactionNode` from the
dlist that it might be part of. Before the refactoring this wasn't a
problem, because the dlist would be completely reset quickly after in
`ResetGlobalVariables` (without reading or writing the dlist entries).
The refactoring changed this by moving the `dlist_delete` call to
`ResetRemoteTransaction`, which in turn was called in the
`!ShouldShutdownConnection` path of `AfterXactHostConnectionHandling`.
Thus this `!ShouldShutdownConnection` path would now delete from the
`dlist`, but the `ShouldShutdownConnection` path would not. Thus to
remove itself the deleting path would sometimes update nodes in the list
that were freed right before.
There's two ways of fixing this:
1. Call `dlist_delete` from **both** of paths.
2. Call `dlist_delete` from **neither** of the paths.
This commit implements the second approach, and #6684 implements the
first. We need to choose which approach we prefer.
To make calling `dlist_delete` from both paths actually work, we also need
to use a slightly different check to determine if we need to call dlist_delete.
Various regression tests showed that there can be cases where the
`transactionState` is something else than `REMOTE_TRANS_NOT_STARTED`
but the connection was not added to the `InProgressTransactions` list
One example of such a case is when running `TransactionStateMachine`
without calling `StartRemoteTransactionBegin` beforehand. In those
cases the connection won't be added to `InProgressTransactions`, but
the `transactionState` is changed to `REMOTE_TRANS_SENT_COMMAND`.
Sidenote: This bug already existed in 11.1, but valgrind didn't catch it
back then. My guess is that this happened because #6314 was merged after
the initial release branch was cut.
Fixes#6638
If there is a problem with an ongoing rebalance, we did not show details
on background tasks that are stuck in runnable state. Similar to how we
show details for errored tasks, we now show details on tasks that are
being retried.
Earlier we showed the following output when a task was stuck:
```
┌────────────────────────────┐
│ { ↵│
│ "tasks": [ ↵│
│ ], ↵│
│ "task_state_counts": {↵│
│ "done": 13, ↵│
│ "blocked": 2, ↵│
│ "runnable": 1 ↵│
│ } ↵│
│ } │
└────────────────────────────┘
```
Now we show details like the following:
```
+-----------------------------------------------------------------------
| {
| "tasks": [
| {
| "state": "runnable",
| "command": "SELECT pg_catalog.citus_move_shard_placement(1
| "message": "ERROR: Moving shards to a node that shouldn't
| "retried": 2,
| "task_id": 3
| }
| ],
| "task_state_counts": {
| "blocked": 1,
| "runnable": 1
| }
| }
+-----------------------------------------------------------------------
```
DESCRIPTION: Fix background rebalance when reference table has no PK
For the background rebalance we would always fail if a reference table
that was not replicated to all nodes would not have a PK (or replica
identity). Even when we used force_logical or block_writes as the shard
transfer mode. This fixes that and adds some regression tests.
Fixes#6680
We should disallow dropping table_name option if foreign table is in
metadata. Otherwise, we get table not found error which contains
shardid.
DESCRIPTION: Fixes an unexpected foreign table error by disallowing to drop the table_name option.
Fixes#6663
This change is a precursor to attempts to add more editorconfig rules in
our codebase. It is a good idea to comply with POSIX standards and have
an empty newline at the end of text files. However, once we have such a
rule, arbitrary configs scripts used to fail before this change.
Related: #5981
Fixes#6570.
In the past, having columnar tables in the cluster was causing pg
upgrades to fail when attempting to access columnar metadata. This is
because, pg_dump doesn't see objects that we use for columnar-am related
booking as the dependencies of the tables using columnar-am.
To fix that; in #5456, we inserted some "normal dependency" edges (from
those objects to columnar-am) into pg_depend.
This helped us ensuring the existency of a class of metadata objects
--such as columnar.storageid_seq-- and helped fixing #5437.
However, the normal-dependency edges that we added for indexes on
columnar metadata tables --such columnar.stripe_pkey-- didn't help at
all because they were indeed causing dependency loops (#5510) and
pg_dump was not able to take those dependency edges into the account.
For this reason, instead of inserting such dependency edges from indexes
to columnar-am, we allow columnar metadata accessors to fall-back to
sequential scan during pg upgrades.
Sometimes isolation_non_blocking_shard_split would fail like this:
```diff
step s2-show-pg_dist_cleanup:
SELECT object_name, object_type, policy_type FROM pg_dist_cleanup;
object_name |object_type|policy_type
------------------------------+-----------+-----------
+citus_shard_split_slot_2_10_39| 3| 0
public.to_split_table_1500001 | 1| 2
-(1 row)
+(2 rows)
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/30237/workflows/edcf34b7-d7d3-4d10-8293-b6f59b00cdf2/jobs/970960
The reason is that replication slots have now become part of
pg_dist_cleanup too, and sometimes they cannot be cleaned up right away.
This is harmless as they will be cleaned up eventually. So this simply
filters out the replication slots for those tests.
Recursive planner should handle all the tree from bottom to top at
single pass. i.e. It should have already recursively planned all
required parts in its first pass. Otherwise, this means we have bug at
recursive planner, which needs to be handled. We add a check here and
return error.
DESCRIPTION: Fixes wrong results by throwing error in case recursive
planner multipass the query.
We found 3 different cases which causes recursive planner passes the
query multiple times.
1. Sublink in WHERE clause is planned at second pass after we
recursively planned a distributed table at the first pass. Fixed by PR
#6657.
2. Local-distributed joins are recursively planned at both the first and
the second pass. Issue #6659.
3. Some parts of the query is considered to be noncolocated at the
second pass as we do not generate attribute equivalances between
nondistributed and distributed tables. Issue #6653
DESCRIPTION: Fix foreign key validation skip at the end of shard move
In eadc88a we started completely skipping foreign key constraint
validation at the end of a non blocking shard move, instead of only for
foreign keys to reference tables. However, it turns out that this didn't
work at all because of a hard to notice bug: By resetting the
SkipConstraintValidation flag at the end of our utility hook, we
actually make the SET command that sets it a no-op.
This fixes that bug by removing the code that resets it. This is fine
because #6543 removed the only place where we set the flag in C code. So
the resetting of the flag has no purpose anymore. This PR also adds a
regression test, because it turned out we didn't have any otherwise we
would have caught that the feature was completely broken.
It also moves the constraint validation skipping to the utility hook.
The reason is that #6550 showed us that this is the better place to skip
it, because it will also skip the planning phase and not just the
execution.
We should do the sublink conversations at the end of the recursive
planning because earlier steps might have transformed the query into a
shape that needs recursively planning the sublinks.
DESCRIPTION: Fixes early sublink check at recursive planner.
Related to PR https://github.com/citusdata/citus/pull/6650
Fixes#6655.
heap_modify_tuple() fetches values[i] if replace[i] is set true,
regardless of the fact that whether isnull[i] is true or false. So
similar to replace[], let's init values[] & isnull[] too.
DESCRIPTION: Fixes an uninitialized memory access in
create_distributed_function()
This change allows creating a constraint without a name using an index.
The index name will be used as the constraint name the same way postgres
handles it.
Fixes issue #6644
This commit also cleans up some leftovers from nameless constraint checks.
With this commit, we now fully support adding all nameless constraints
directly to a table.
Co-authored-by: naisila <nicypp@gmail.com>
Adds NOT VALID option to deparser. When we need to deparse:
"ALTER TABLE ADD FOREIGN KEY ... NOT VALID"
"ALTER TABLE ADD CHECK ... NOT VALID"
NOT VALID option should be propagated to workers.
Fixes issue #6646
This commit also uses AppendColumnNameList function
instead of repeated code blocks in two appropriate places
in the "ALTER TABLE" deparser.
If an update query on a reference table has a returns clause with a
subquery that accesses some other local table, we end-up with an crash.
This commit prevents the crash, but does not prevent other error
messages from happening due to Citus not being able to pushdown the
results of that subquery in a valid SQL command.
Related: #6634
DESCRIPTION: Fix regression in allowed foreign keys on distributed
tables
In commit eadc88a we changed how we skip foreign key validation. The
goal was to skip it in more cases. However, one change had the
unintended regression of introducing failures when trying to create
certain foreign keys. This reverts that part of the change.
The way of skipping validation of foreign keys that was introduced in
eadc88a was skipping validation during execution. The reason that
this caused this regression was because some foreign key validation
queries already fail during planning. In those cases it never gets to
the execution step where it would later be skipped.
Fixes#6543
Multiple `check-xxx` targets create tablespaces. If you run
two of these at the same time you would get an error like:
```diff
CREATE TABLESPACE test_tablespace LOCATION :'test_tablespace';
+ERROR: directory "/home/rajesh/citus/citus/src/test/regress/tmp_check/ts0/PG_14_202107181" already in use as a tablespace
```
This fixes that by moving creation of table space directory creation and
removal to pg_regress_multi.pl instead of being in the Makefile.
DESCRIPTION: Enable adding FOREIGN KEY constraints on Citus tables
without a name
This PR enables adding a foreign key to a distributed/reference/Citus
local table without specifying the name of the constraint, e.g. `ALTER
TABLE items ADD FOREIGN KEY (user_id) REFERENCES users (id);`
This implements the phase - II of MERGE sql support
Support routable query where all the tables in the merge-sql are distributed, co-located, and both the source and
target relations are joined on the distribution column with a constant qual. This should be a Citus single-task
query. Below is an example.
SELECT create_distributed_table('t1', 'id');
SELECT create_distributed_table('s1', 'id', colocate_with => ‘t1’);
MERGE INTO t1
USING s1 ON t1.id = s1.id AND t1.id = 100
WHEN MATCHED THEN
UPDATE SET val = s1.val + 10
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED THEN
INSERT (id, val, src) VALUES (s1.id, s1.val, s1.src)
Basically, MERGE checks to see if
There are a minimum of two distributed tables (source and a target).
All the distributed tables are indeed colocated.
MERGE relations are joined on the distribution column
MERGE .. USING .. ON target.dist_key = source.dist_key
The query should touch only a single shard i.e. JOIN AND with a constant qual
MERGE .. USING .. ON target.dist_key = source.dist_key AND target.dist_key = <>
If any of the conditions are not met, it raises an exception.
citus_job_list() lists all background jobs by simply showing the records
in pg_dist_background_job.
citus_job_status(job_id bigint, raw boolean default false) shows the
status of a single background job by appending a jsonb details column to
the associated row from pg_dist_background_job. If the raw argument is
set, machine readable sizes are used instead of human readable
alternatives.
citus_rebalance_status(raw boolean default false) shows the status of
the last rebalance operation. If the raw argument is set, machine
readable sizes are used instead of human readable alternatives.
The original implementation of GPIDs didn't work correctly when using
`pg_dist_poolinfo` together with PgBouncer. The reason is that it
assumed that once a connection was made to a worker, the originating
GPID should stay the same for ever. But when pg_dist_poolinfo is used
this isn't the case, because the same connection on the worker might be
used by different backends of the coordinator.
This fixes that issue by updating the GPID whenever a new application
name is set on a connection. This is the only thing that's needed,
because PgBouncer already sets the application name correctly on the
server connection whenever a client is updated.
DESCRIPTION: Enable adding CHECK constraints on distributed tables
without the client having to provide a constraint name.
This PR enables the following command syntax for adding check
constraints to distributed tables.
ALTER TABLE ... ADD CHECK ...
by creating a default constraint name and transforming the command into
the below syntax before sending it to workers.
ALTER TABLE ... ADD CONSTRAINT \<conname> CHECK ...
Table Constraints UNIQUE, PRIMARY KEY and EXCLUDE may have option
DEFERRABLE in their command syntax. This PR handles the option when
deparsing the relevant constraint statements.
NOT DEFERRABLE
and
INITIALLY IMMEDIATE (if DEFERRABLE}
are the default values for the option so we only append the non-default
values to the alter table statement.
In #6412 I made a change to not re-assign the global PID if it was
already set. This inadvertently introduced a regression where `userId`
and `databaseId` would not be set on the backend data when the global
PID was assigned in the authentication hook.
This fixes it by doing two things:
1. Removing `userId` from `BackendData`, since it's not used anywhere
anyway.
2. Move assignment of `databaseId` to dedicated
`SetBackendDataDatabaseId` function, that isn't a no-op when global
pid is already set.
Since #6412 is not released yet this does not need a description.
In #6598 it was noticed that Citus could generate syntactically invalid
statements during logical replication. With #6603 we resolved the direct
issue, by only generating valid subscription names. But there was also
the underlying problem that we did not escape certain identifier
strings. While in theory this should be okay since we should only
generate names that are valid, this issue reiterated that we should not
take this for granted. As an extra line of defense this quotes all
identifiers we use during logical replication setup.
Apparently no-one actually ran the mx_base_schedule, because the tests
in schedule itself were already failing. This updates it to be in line
with multi_mx_schedule again to make the tests pass again. Notably it
doesn't contain multi_mx_node_metadata and multi_extension. Because
those tests take long to run and the were not necessary to make
multi_mx_create_table pass again.
DESCRIPTION: Adds support for creating table constraints UNIQUE and
EXCLUDE via ALTER TABLE command without client having to specify a name.
ALTER TABLE ... ADD CONSTRAINT <conname> UNIQUE ...
ALTER TABLE ... ADD CONSTRAINT <conname> EXCLUDE ...
commands require the client to provide an explicit constraint name.
However, in postgres it is possible for clients not to provide a name
and let the postgres generate it using the following commands
ALTER TABLE ... ADD UNIQUE ...
ALTER TABLE ... ADD EXCLUDE ...
This PR enables the same functionality for citus tables.
DESCRIPTION: Drop `SHARD_STATE_TO_DELETE` and use the cleanup records
instead
Drops the shard state that is used to mark shards as orphaned. Now we
insert cleanup records into `pg_dist_cleanup` so "orphaned" shards will
be dropped either by maintenance daemon or internal cleanup calls. With
this PR, we make the "cleanup orphaned shards" functions to be no-op, as
they would not be needed anymore.
This PR includes some naming changes about placement functions. We don't
need functions that filter orphaned shards, as there will be no orphaned
shards anymore.
We will also be introducing a small script with this PR, for users with
orphaned shards. We'll basically delete the orphaned shard entries from
`pg_dist_placement` and insert cleanup records into `pg_dist_cleanup`
for each one of them, during Citus upgrade.
We also have a lot of flakiness fixes in this PR.
Co-authored-by: Jelte Fennema <github-tech@jeltef.nl>
Sometimes our `isolation_insert_vs_vacuum` test would fail like this.
```diff
step s2-vacuum-analyze:
VACUUM ANALYZE test_insert_vacuum;
-
+ <waiting ...>
step s1-commit:
COMMIT;
+step s2-vacuum-analyze: <... completed>
```
The reason seems to be that VACUUM ANALYZE tries to take some locks that
conflict with the other transaction, but these locks somehow get
released or VACUUM ANALYZE stops waiting for them. This is somewhat
expected since VACUUM has some special locking logic.
To solve the flakyness we now trigger VACUUM ANALYZE to always report as
blocking and after that we wait explicitly wait for it to complete. This
is done
like is suggested by the flaky test tips from postgres:
c68a183990/src/test/isolation/README (L152)
I've confirmed that this fixes the issue suing our flaky-test-debugging
CI workflow.
DESCRIPTION: Defers cleanup after a failure in shard move or split
We don't need to do a cleanup in case of failure on a shard transfer or
split anymore. Because,
* Maintenance daemon will clean them up anyway.
* We trigger a cleanup at the beginning of shard transfers/splits.
* The cleanup on failure logic also can fail sometimes and instead of
the original error, we throw the error that is raised by the cleanup
procedure, and it causes confusion.
* Skip some exceptional test files in the flaky workflow, like
multi_extension
* Run some tests without a schedule, like single_node_enterprise
* Use minimal schedule for the tests in split and operations schedules
DESCRIPTION: Cleanup the shard on the target node in case of a
failed/aborted shard move
Inserts a cleanup record for the moved shard placement on the target
node. If the move operation succeeds, the record will be deleted. If
not, it will remain there to be cleaned up later.
fixes: #6580
We have several version checks in our Citus upgrade tests. However, as
we drop support for PG versions, we need to update the Citus versions
used in our CI images. Therefore we must compare Citus versions in our
tests instead of using equality checks so that the queries are ran in
all the associated Citus versions.
For example, we have many conditionals where we early exit if the Citus
version is not equal to 9.0. However, as of today we never use version
9.0 and thus we always early exit in those tests.
All the tables (target, source or any CTE present) in the SQL statement are local i.e. a merge-sql with a combination of Citus local and
Non-Citus tables (regular Postgres tables) should work and give the same result as Postgres MERGE on regular tables. Catch and throw an
exception (not-yet-supported) for all other scenarios during Citus-planning phase.
DESCRIPTION: Support ALTER TABLE .. ADD PRIMARY KEY ... command
Before processing
> **ALTER TABLE ... ADD PRIMARY KEY ...**
command
1. Create a primary key name to use as the constraint name.
2. Change the **ALTER TABLE ... ADD PRIMARY KEY ...** command to into
**ALTER TABLE ... ADD CONSTRAINT \<constraint name> PRIMARY KEY ...**
form.
This is the only form we can specify a name for a primary key. If we run
ALTER TABLE .. ADD PRIMARY KEY, postgres
would create a constraint name internally in its own scheme. But the
problem is that we need to create constraint names
for shards in our own scheme which is \<constraint name>_\<shardid>.
Hence we need to create a name and send it to workers so that the
workers can append the shardid.
4. Run the changed command on the coordinator to make sure we are using
the same constraint name across the board.
5. Send the changed command to workers such that it is executed for the
main table as well as for the shards.
Fixes#6515.
Removes unused job boundary tag `SUBQUERY_MAP_MERGE_JOB`.
Only usage is at `BuildMapMergeJob`, which is only called when the
boundary = `JOIN_MAP_MERGE_JOB`. Hence, it should be safe to remove.
Before this commit, we created an additional WaitEventSet for
checking whether the remote socket is closed per connection -
only once at the start of the execution.
However, for certain workloads, such as pgbench select-only
workloads, the creation/deletion of the additional WaitEventSet
adds ~7% CPU overhead, which is also reflected on the benchmark
results.
With this commit, we use the same WaitEventSet for the purposes
of checking the remote socket at the start of the execution.
We use "rebuildWaitEventSet" flag so that the executor can re-use
the existing WaitEventSet.
As a result, we see the following improvements on PG 15:
main : 120051 tps, 0.532 ms latency avg.
avoid_wes_rebuild: 127119 tps, 0.503 ms latency avg.
And, on PG 14, as expected, there is no difference
main : 129191 tps, 0.495 ms latency avg.
avoid_wes_rebuild: 129480 tps, 0.494 ms latency avg.
But, note that PG 15 is slightly (~1.5%) slower than PG 14.
That is probably the overhead of checking the remote socket.
Fixes a missed include in #6315.
While adding the cluster clock we have added some extra steps to
`citus_prepare_pg_upgrade` and `citus_finish_pg_upgrade`. These changes
were not added to the citus upgrade and downgrade scripts, this allowed
for a syntax error to slip in.
This PR adds the new versions of both UDF's to the upgrade script while
adding the old version to the downgrade script. This exposed the syntax
error which is also solved.
- Because of the make command used for vanilla tests, test status is
always shown as success on CI. As a fix, I added `&& false` at the end
of the copying diff file to make the command fail when check-vanilla
fails.
```make
check-vanilla: all
$(pg_regress_multi_check) --vanillatest || (cp $(vanilla_diffs_file) $(citus_abs_srcdir)/regression.diffs && false)
```
- I also fixed some vanilla tests that fails due to recently added clock
related operators shown up at some queries.
We already have citus_job_wait to wait until the job reaches the desired
state. That PR adds waiting on task state to allow more granular
waiting. It can be used for Citus operations. Moreover, it is also
useful for testing purposes. (wait until a task reaches specified state)
Related to #6459.
Fixes task executor SIGTERM handling.
Problem:
When task executors are sent SIGTERM, their default handler
`bgworker_die`, which is set at worker startup, logs FATAL error. But
they do not release locks there before logging the error, which
sometimes causes hanging of the monitor. e.g. Monitor waits for the lock
forever at pg_stat flush after calling proc_exit.
Solution:
Because executors have connection to backend, they should handle SIGTERM
similar to normal backends. Normal backends uses `die` handler, in which
they set ProcDiePending flag and the next CHECK_FOR_INTERRUPTS call
handles it gracefully by releasing any lock before termination.
This PR adds a new CI workflow named ```flaky-test``` to run flaky test
detection on newly introduced regression tests.
Co-authored-by: Jelte Fennema <github-tech@jeltef.nl>
Adding a testing function `wait_for_resource_cleanup` which waits until
all records in `pg_dist_cleanup` are cleaned up. The motivation is to
prevent flakiness in our tests, since the `NOTICE: cleaned up X orphaned
resources` message is not consistent in many cases. This PR replaces
`citus_cleanup_orphaned_resources` calls with
`wait_for_resource_cleanup` calls.
DESCRIPTION: Create replication artifacts with unique names
We're creating replication objects with generic names. This disallows us
to enable parallel shard moves, as two operations might use the same
objects. With this PR, we'll create below objects with operation
specific names, by appending OparationId to the names.
* Subscriptions
* Publications
* Replication Slots
* Users created for subscriptions
1) Regular users fail to use clock UDF with permission issue.
2) Clock functions were declared as STABLE, whereas by definition they are VOLATILE. By design, any clock/time
functions will return different results for each call even within a single SQL statement.
Note: UDF citus_get_transaction_clock() is a misnomer as it internally calls the clock tick which always returns
different results for every invocation in the same transaction.
Adds signal handlers for graceful termination, cancellation of
task executors and detecting config updates. Related to PR #6459.
#### How to handle termination signal?
Monitor need to gracefully terminate all running task executors before
terminating. Hence, we have sigterm handler for the monitor.
#### How to handle cancellation signal?
Monitor need to gracefully cancel all running task executors before
terminating. Hence, we have sigint handler for the monitor.
#### How to detect configuration changes?
Monitor has SIGHUP handler to reflect configuration changes while
executing tasks.
We are having some flakiness in our test schedule because of the objects
leftover from shard moves/splits. With this commit we prevent logging
cleanup object counts.
fixes: #6534
When using multiline strings, we occasionally forget to add a single
space at the end of the first line. When this line is concatenated with
the next one, the resulting string has a missing space.
With this PR, citus code will be tested in all packaging environments.
Sometimes, there can be compile errors which blocks packaging and in
this case unplanned delays may occur.
By testing the code in packaging environments, I'm aiming to detect any
compilation errors before packaging.
Co-authored-by: Onur Tirtir <onurcantirtir@gmail.com>
Co-authored-by: Hanefi Onaldi <Hanefi.Onaldi@microsoft.com>
DESCRIPTION: Extend cleanup process for replication artifacts
This PR adds new cleanup record types for:
* Subscriptions
* Replication slots
* Publications
* Users created for subscriptions
We add records for these object types, to `pg_dist_cleanup` during
creation phase. Once the operation is done, in case of success or
failure, we iterate those records and drop the objects. With this PR we
will not be dropping any of these objects during the operation. In
short, we will always be deferring the drop.
One thing that's worth mentioning is that we sort cleanup records before
processing (dropping) them, because of dependency relations among those
objects, e.g a subscription might depend on a publication. Therefore, we
always drop subscriptions before publications.
We have some renames in this PR:
* `TryDropOrphanedShards` -> `TryDropOrphanedResources`
* `DropOrphanedShardsForCleanup` -> `DropOrphanedResourcesForCleanup`
* `run_try_drop_marked_shards` -> `run_try_drop_marked_resources`
as these functions now process replication artifacts as well.
This PR drops function `DropAllLogicalReplicationLeftovers` and its all
usages, since now we rely on the deferring drop mechanism.
Improvement on our background task monitoring API (PR #6296) to support
concurrent and nonblocking task execution.
Mainly we have a queue monitor background process which forks task
executors for `Runnable` tasks and then monitors their status by
fetching messages from shared memory queue in nonblocking way.
**Problem**: Currently, we error out if we detect recurring tuples in
one side without checking the other side of the join.
**Solution**: When one side of the full join consists recurring tuples
and the other side consists nonrecurring tuples, we should not pushdown
to prevent duplicate results. Otherwise, safe to pushdown.
This PR changes
```citus.propagate_session_settings_for_loopback_connection``` default
value to off not to expose this feature publicly at this point. See
#6488 for details.
When debugging issues it's quite useful to see the originating gpid in
the application_name of a query on a worker. This already happens for
most queries, but not for queries created by the rebalancer or by
run_command_on_worker. This adds a gpid to those two application_names
too.
Note, that if the GPID of the new application_names is different than
the current GPID of the backend the backend will continue to keep
the old gpid as its actual GPID. This PR is just meant to make sure
that the application_name is as useful as it can be for users to
look at. Updating of gpids will be done in a follow-up PR, and
adding gpids to all internal connections will make this easier.
DESCRIPTION: Fixes a potential dangling pointer issue
Need to backport to 11.0 & 11.1 since we might want to release packages
for debian/bookworm based on those branches in future.
Fixes a bug that causes crash when using auto_explain extension with
ALTER TABLE...ADD FOREIGN KEY... queries.
Those queries trigger a SELECT query on the citus tables as part of the
foreign key constraint validation check. At the explain hook, workers
try to explain this SELECT query as a distributed query causing memory
corruption in the connection data structures. Hence, we will not explain
ALTER TABLE...ADD FOREIGN KEY... and the triggered queries on the
workers.
Fixes#6424.
I recently cleaned up our test suite from redundant test outputs: #6111#6140#6214#6140#6434
I had to check many files manually, as they didn't have any
documentation on why the alternative test output existed in the first
place.
Adding a section in our test docs to remind developers to add
alternative test outputs with enough information/keywords.
(Hopefully) Fixes#5000.
If memory allocation done for `SubXactContext *state` in `PushSubXact()`
fails, then `PopSubXact()` might segfault, for example, when grabbing
the
topmost `SubXactContext` from `activeSubXactContexts` if this is the
first
ever subxact within the current xact, with the following stack trace:
```c
citus.so!list_nth_cell(const List * list, int n) (\opt\pgenv\pgsql-14.3\include\server\nodes\pg_list.h:260)
citus.so!PopSubXact(SubTransactionId subId) (\home\onurctirtir\citus\src\backend\distributed\transaction\transaction_management.c:761)
citus.so!CoordinatedSubTransactionCallback(SubXactEvent event, SubTransactionId subId, SubTransactionId parentSubid, void * arg) (\home\onurctirtir\citus\src\backend\distributed\transaction\transaction_management.c:673)
CallSubXactCallbacks(SubXactEvent event, SubTransactionId mySubid, SubTransactionId parentSubid) (\opt\pgenv\src\postgresql-14.3\src\backend\access\transam\xact.c:3644)
AbortSubTransaction() (\opt\pgenv\src\postgresql-14.3\src\backend\access\transam\xact.c:5058)
AbortCurrentTransaction() (\opt\pgenv\src\postgresql-14.3\src\backend\access\transam\xact.c:3366)
PostgresMain(int argc, char ** argv, const char * dbname, const char * username) (\opt\pgenv\src\postgresql-14.3\src\backend\tcop\postgres.c:4250)
BackendRun(Port * port) (\opt\pgenv\src\postgresql-14.3\src\backend\postmaster\postmaster.c:4530)
BackendStartup(Port * port) (\opt\pgenv\src\postgresql-14.3\src\backend\postmaster\postmaster.c:4252)
ServerLoop() (\opt\pgenv\src\postgresql-14.3\src\backend\postmaster\postmaster.c:1745)
PostmasterMain(int argc, char ** argv) (\opt\pgenv\src\postgresql-14.3\src\backend\postmaster\postmaster.c:1417)
main(int argc, char ** argv) (\opt\pgenv\src\postgresql-14.3\src\backend\main\main.c:209)
```
For this reason, to be more defensive against memory-allocation errors
that could happen at `PushSubXact()`, now we use our pre-allocated
memory
context for the objects created in `PushSubXact()`.
This commit also attempts reducing the memory allocations done under
CommitContext to reduce the chances of consuming all the memory
available
to CommitContext.
Note that it's problematic to encounter with such a memory-allocation
error for other objects created in `PushSubXact()` as well, so above is
an **example** scenario that might result in a segfault.
DESCRIPTION: Fixes a bug that might cause segfaults when handling deeply
nested subtransactions
DESCRIPTION: Makes sure to disallow triggers that depend on extensions
We were already doing so for `ALTER trigger DEPENDS ON EXTENSION`
commands. However, we also need to disallow creating Citus tables
having such triggers already, so this PR fixes that.
DESCRIPTION: Improve a query that terminates compeling backends from citus_update_node()
1. Use pg_blocking_pids() function instead of self join on pg_locks. It exists since 9.6 and more accurate than pg_locks.
2. Prefix all function calls with pg_catalog schema to prevent privilege escalation by creating functions with similar names in a public schema.
3. Change logs and update comments to reflect the fact that the pg_terminate_backend() function only sends SIGTERM but not wating for the actual backend termination.
DESCRIPTION: Allow citus_update_node() to work with nodes from different clusters
citus_update_node(), citus_nodename_for_nodeid(), and citus_nodeport_for_nodeid() functions only checked for nodes in their own clusters and hence last two returned NULLs and the first one showed an error is the nodeId was from a different cluster.
Fixes https://github.com/citusdata/citus/issues/6433
increasing logical clock. Clock guarantees to never go back in value after restarts,
and makes best attempt to keep the value close to unix epoch time in milliseconds.
Also, introduces a new GUC "citus.enable_cluster_clock", when true, every
distributed transaction is stamped with logical causal clock and persisted
in a catalog pg_dist_commit_transaction.
DESCRIPTION: Drops GUC defer_drop_after_shard_split
DESCRIPTION: Drops GUC defer_drop_after_shard_move
Drop GUCs and related parts from the code.
Delete tests that specifically added for the GUCs.
Keep tests that can be used without the GUCs.
Update test output changes.
The motivation for this PR is to have an "always deferring" mechanism.
These two GUCs provide an option to not deferring dropping objects
during a shard move/split, and dropping them immediately. With this PR,
we will be always deferring dropping orphaned shards and other types of
objects.
We will have a separate PR to extend the deferred cleanup operation, so
that we would create records for deferred drop, for Subscriptions,
Publications, Replication Slots etc. This will make us be able to keep
track of created objects that needs to be dropped, during a shard
move/split. We will have objects created specifically for the current
operation; and those objects will be dropped at the end.
We have an issue (a draft roadmap) for enabling parallel shard moves.
For details please see: https://github.com/citusdata/citus/issues/6437
Sometimes in CI our failure_split_cleanup test would fail like this:
```diff
CALL pg_catalog.citus_cleanup_orphaned_resources();
-NOTICE: cleaned up 79 orphaned resources
+NOTICE: cleaned up 82 orphaned resources
SELECT operation_id, object_type, object_name, node_group_id, policy_type
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/28107/workflows/4ec712c9-98b5-4e90-9806-e02a37d71679/jobs/846107
The reason was that previous tests in the schedule would also create
some orphaned resources. Sometimes some of those would already be
cleaned up by the maintenance daemon, resulting in a different number of
cleaned up resources than expected. This cleans up any previously
created resources at the start of the test without logging how many
exactly were cleaned up. As a bonus this now also allows running this
test using check-failure-base.
This didn't cause any bugs since today we're always calling
UpdateAutoConvertedForConnectedRelations with autoconverted=false, so we
don't need to backport this to anywhere.
Good PR descriptions for flaky tests are quite helpful when reviewing.
Although obviously no PR description is the same, there's a few common
pieces of information that are useful for all PRs that fix flaky tests.
We should not introduce breaking sql changes to upgrade files after they
are released. We did that for worker_fetch_foreign_file in v9.0.0 and
worker_repartition_cleanup in v9.2.0. Later when we try to drop those
udfs, they were missing for some clients unexpectedly due to breaking
change in an old upgrade script. For that case, the fix is to add DROP
IF EXISTS for those 2 udfs in 11.0-4--11.1-1.
This crash happens with recursively planned queries. For such queries,
subplans are explained via the ExplainOnePlan function of postgresql.
This function reconstructs the query description from the plan therefore
it expects the ActiveSnaphot for the query be available. This fix makes
sure that the snapshot is in the stack before calling ExplainOnePlan.
Fixes#2920.
DESCRIPTION: Don't leak search_path to workers on DDL
For DDL we have to set the `search_path` on workers to the same as on
the coordinator for some DDL to work. Previously this search_path would
leak outside of the transaction that was used for the DDL. This fixes
that by using `SET LOCAL` instead of `SET`. The only place where we
still use plain `SET` is for DDL commands that are not allowed within
transactions, such as `CREATE INDEX CONCURRENLTY`.
This fixes this flaky test:
```diff
CONTEXT: SQL statement "SELECT change_id FROM distributed_triggers.data_changes
WHERE shard_key_value = NEW.shard_key_value AND object_id = NEW.object_id
ORDER BY change_id DESC LIMIT 1"
-PL/pgSQL function record_change() line XX at SQL statement
+PL/pgSQL function distributed_triggers.record_change() line 17 at SQL statement
while executing command on localhost:57638
DELETE FROM data_ref_table where shard_key_value = 'hello';
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/27849/workflows/75ae5f1a-100b-4b7a-b991-7de069f39ee1/jobs/831429
I had tried to fix this flaky test in #5894 and then I tried
implementing a better fix in #5896, where @marcocitus suggested this
better fix. This change reverts the fix from #5894 and implements the
fix suggested by Marco.
Our multi_mx_alter_distributed_table test actually depended on the old
buggy search_path leaking behavior. After fixing the bug that test would
fail like this:
```diff
CALL proc_0(1.0);
DEBUG: pushing down the procedure
-NOTICE: Res: 3
-DETAIL: from localhost:xxxxx
+ERROR: relation "test_proc_colocation_0" does not exist
+CONTEXT: PL/pgSQL function mx_alter_distributed_table.proc_0(double precision) line 5 at SQL statement
+while executing command on localhost:57637
RESET client_min_messages;
```
I fixed this test by fully qualifying the table names used in the
procedure. I think it's quite unlikely that actual users depend
on this behavior though. Since it would require first doing
DDL before calling a procedure in a session where the
search_path was changed after connecting.
DESCRIPTION: Adds failure test for shard move
DESCRIPTION: Remove function `WaitForAllSubscriptionsToBecomeReady` and
related tests
Adding some failure tests for shard moves.
Dropping the not-needed-anymore function
`WaitForAllSubscriptionsToBecomeReady`, as the subscriptions now start
as ready from the beginning because we don't use logical replication
table sync workers anymore.
fixes: #6260
In CI shard_rebalancer sometimes fails with this error:
```diff
SET citus.node_connection_timeout to 60;
BEGIN;
SET LOCAL citus.shard_replication_factor TO 2;
SET citus.log_remote_commands TO ON;
SET SESSION citus.max_adaptive_executor_pool_size TO 5;
SELECT replicate_table_shards('dist_table_test_2', max_shard_copies := 4, shard_transfer_mode:='block_writes');
+WARNING: could not establish connection after 60 ms
```
Source
https://app.circleci.com/pipelines/github/citusdata/citus/28128/workflows/38eeacc4-4191-4366-87ed-9a628414965a/jobs/847458?invite=true#step-107-21
This PR avoids this issue by increasing
```citus.node_connection_timeout``` to 35s.
I fixed a lot of flaky tests recently and I found some patterns in the
type of issues and type of fixes. This adds a document that lists
these types of issues and explains how to fix them.
To be able to test non-blocking shard moves we take an advisory lock, so
we can pause the shard move at an interesting moment. Originally this
was during the logical replication catch up phase. But when I added
tests for the rebalancer progress I moved this lock before the initial
data copy. This allowed testing of the rebalance progress, but
inadvertently made our non-blocking tests not actually test if we held
unintended locks during logical replication catch up.
This fixes that by creating two types of advisory locks, one before the
copy and one after. This causes the tests to actually test their
intended scenario again.
Furthermore it starts using one of these locks for blocking shard moves
too. Which allowed me to reduce the complexity of the rebalance progress
test suite quite a bit. It also allowed enabling some flaky tests again,
because this stopped them from being flaky. And finally it allowed
testing of rebalance progress for blocking shard copy operations as
well.
In passing it fixes a flaky test during parallel blocking shard moves by
ordering the output.
DESCRIPTION: Adds status column to get_rebalance_progress()
Introduces a new column named `status` for the function
`get_rebalance_progress()`. For each ongoing shard move, this column
will reveal information about that shard move operation's current
status.
For now, candidate status messages could be one of the below.
* Not Started
* Setting Up
* Copying Data
* Catching Up
* Creating Constraints
* Final Catchup
* Creating Foreign Keys
* Completing
* Completed
Deparser function set_relation_column_names() knows that it needs to
re-evaluate column names based on relation's tuple descriptor when
the rte belongs to a relation (RTE_RELATION).
However before this commit, it didn't know about the fact that citus
might wrap such an rte with an rte that points to
citus_extradata_container() placeholder.
And because of this, it was simply taking the column aliases
(e.g., "bar" in "foo AS bar") into the account and this might result in
an incorrectly deparsed query as in below case:
* Say, if we had view based on following query:
```sql
SELECT a FROM table;
```
* And if we rename column "a" to "b", the view query normally becomes:
```sql
SELECT b AS a FROM table;
```
* So before this commit, deparsing a query based on that view was
resulting in such a query due to deparsing based on the column aliases,
which is not correct:
```sql
SELECT a FROM table;
```
Fixes#5932.
DESCRIPTION: Fixes a bug that might cause failing to query the views
based on tables that have renamed columns
PostgreSQL 15 exposes WL_SOCKET_CLOSED in WaitEventSet API, which is
useful for detecting closed remote sockets. In this patch, we use this
new event and try to detect closed remote sockets in the executor.
When a closed socket is detected, the executor now has the ability to
retry the connection establishment. Note that, the executor can retry
connection establishments only for the connection that has not been
used. Basically, this patch is mostly useful for preventing the executor
to fail if a cached connection is closed because of the worker node
restart (or worker failover).
In other words, the executor cannot retry connection establishment if we
are in a distributed transaction AND any command has been sent over the
connection. That requires more sophisticated retry mechanisms. For now,
fixing the above use case is enough.
Fixes#5538
Earlier discussions: #5908, #6259 and #6283
### Summary of the current approach regards to earlier trials
As noted, we explored some alternatives before getting into this.
https://github.com/citusdata/citus/pull/6283 is simple, but lacks an
important property. We should be checking for `WL_SOCKET_CLOSED`
_before_ sending anything over the wire. Otherwise, it becomes very
tricky to understand which connection is actually safe to retry. For
example, in the current patch, we can safely check
`transaction->transactionState == REMOTE_TRANS_NOT_STARTED` before
restarting a connection.
#6259 does what we intent here (e.g., check for sending any command).
However, as @marcocitus noted, it is very tricky to handle
`WaitEventSets` in multiple places. And, the executor is designed such
that it reacts to the events. So, adding anything `pre-executor` seemed
too ugly.
In the end, I converged into this patch. This patch relies on the
simplicity of #6283 and also does a very limited handling of
`WaitEventSets`, just for our purpose. Just before we add any connection
to the execution, we check if the remote session has already closed.
With that, we do a brief interaction of multiple wait event processing,
but with different purposes. The new wait event processing we added does
not even consider cancellations. We let that handled by the main event
processing loop.
Co-authored-by: Marco Slot <marco.slot@gmail.com>
In #6405 I added better improved blocked process detection for isolation
tests. But when cleaning up unnecessary code I cleaned up a bit too
much. This actually includes the new function definition in our
migrations.
In CI multi_partitioning sometimes fails with this error:
```diff
SELECT citus_remove_node('localhost', :master_port);
- citus_remove_node
----------------------------------------------------------------------
-
-(1 row)
-
+ERROR: tuple concurrently deleted
-- d) invalid tables for helper UDFs
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/27993/workflows/685e5b20-c923-43e5-8a0d-b932ef4c4914/jobs/839466
This PR avoids this concurrency issue by not running the
multi_partitioning test in parallel with other tests.
If an operation requires having coordinator in pg_dist_node and if that
is not the case, then we automatically add the coordinator into
pg_dist_node if user didn't add any worker nodes yet.
However, if user have already added some worker nodes before, we throw
an error. With this commit, we improve the error thrown in that case.
Closes#6423 based on the discussion made there.
Sometimes our CI randomly fails on a test in a way similar to this:
```diff
step s2-drop:
DROP TABLE cancel_table;
-
+ <waiting ...>
+step s2-drop: <... completed>
starting permutation: s1-timeout s1-begin s1-sleep10000 s1-rollback s1-reset s1-drop
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/26524/workflows/5415b84f-13a3-482f-bef9-648314c79a67/jobs/756377
I tried to fix that already in #6252 by disabling the maintenance daemon
during isolation tests. But it seems that hasn't fixed all cases of
these errors. This is another attempt at fixing these issues that seems
to have better results.
What it does is that it starts using the pInterestingPids parameter that
citus_isolation_test_session_is_blocked receives. With this change we
start filter out block-edges that are not caused by any of these pids.
In passing this change also makes it possible to run
`isolation_create_distributed_table_concurrently` with
`check-isolation-base`
PG15 introduced a function called ReplicationSlotName that causes
conflicts with our function with the same name. I solved this issue by
renaming our function to ReplicationSlotNameForNodeAndOwner
Relevant PG commit:
c3b5992b91
DESCRIPTION: Fix bug in global PID assignment for rebalancer
sub-connections
In CI our isolation_shard_rebalancer_progress test would sometimes fail
like this:
```diff
+isolationtester: canceling step s1-rebalance-c1-block-writes after 60 seconds
step s1-rebalance-c1-block-writes:
SELECT rebalance_table_shards('colocated1', shard_transfer_mode:='block_writes');
- <waiting ...>
+
+ERROR: canceling statement due to user request
step s7-get-progress:
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/27855/workflows/2a7e335a-f3e8-46ed-b6bd-6920d42f7214/jobs/831710
It turned out this was an actual bug in the way our assigning of global
PIDs interacts with the way we connect to ourselves as the shard
rebalancer. The first command the shard rebalancer sends is a SET
ommand to change the application_name to `citus_rebalancer`. If
`StartupCitusBackend` is called after this command is processed, then it
overwrites the global PID that was extracted from the previous
application_name. This makes sure that we don't do that, and continue to
use the original global PID. While it might seem that we only call
`StartupCitusBackend` once for each query backend, this isn't actually
the case. Whenever pg_dist_partition gets ANALYZEd by autovacuum
we indirectly call `StartupCitusBackend` again, because we invalidate
the cache then.
In passing this fixes two other things as well:
1. It sets `distributedCommandOriginator` correctly in
`AssignGlobalPID`, by using IsExternalClientBackend(). This doesn't
matter much anymore, since AssignGlobalPID effectively becomes a
no-op in this PR for any non-external client backends.
2. It passes the application_name to InitializeBackendData in
StartupCitusBackend, instead of INVALID_CITUS_INTERNAL_BACKEND_GPID
(which effectively got casted to NULL). In practice this doesn't
change the behaviour of the call, since the call is a no-op for every
backend except the maintenance daemon. And the behaviour of the call
is the same for NULL as for the application_name of the maintenance
daemon.
We decrease verbosity level here to avoid the flaky output
https://app.circleci.com/pipelines/github/citusdata/citus/27936/workflows/dc63128a-1570-41a0-8722-08f3e3cfe301/jobs/836153
```diff
select alter_table_set_access_method('ref','heap');
NOTICE: creating a new table for alter_table_set_access_method.ref
NOTICE: moving the data of alter_table_set_access_method.ref
NOTICE: dropping the old alter_table_set_access_method.ref
NOTICE: drop cascades to 2 other objects
-DETAIL: drop cascades to materialized view m_ref
-drop cascades to view v_ref
+DETAIL: drop cascades to view v_ref
+drop cascades to materialized view m_ref
CONTEXT: SQL statement "DROP TABLE alter_table_set_access_method.ref CASCADE"
NOTICE: renaming the new table to alter_table_set_access_method.ref
alter_table_set_access_method
-------------------------------
(1 row)
```
DESCRIPTION: Raises memory limits in columnar from 256MB to 1GB for
reads and writes
This doesn't completely fix#5918 but at least increases the
buffer limits that might cause throwing an error when reading
from or writing into into columnar storage. A way better approach
to fix this is documented in #6420.
Replacing memcpy_s with memcpy is quite safe in those places
since we anyway make sure to allocate enough amount of memory
before writing into related buffers.
When you run vanilla tests in your local environment, some of the tests
tries to find path for regress.so which is not in default lib path. That
is why we need to specify regress.so path as dlpath option.
Example failure:
```
LOAD :'regresslib';
+ERROR: could not access file "/home/aykutbozkurt/.pgenv/pgsql-15beta4/lib/regress.so": No such file or directory
```
It is actually in
`~/.pgenv/src/postgresql-15beta4/src/test/regress/regress.so` which is
found by `$regresslibdir`.
PG15 introduced an optimization on GROUP BY keys that is now reverted on
RC2.
Relevant PG commit:
Revert "Optimize order of GROUP BY keys".
443df6e2db932a7cd6d85ddfb67e11a43345130d
Fixes https://github.com/citusdata/citus/issues/6394.
DESCRIPTION: Fixes a bug that causes creating disabled-triggers on
shards as enabled
Since CREATE TRIGGER doesn't have syntax support to specify
whether the trigger should be enabled/disabled, the underlying
PG function (`pg_get_triggerdef()`) that we use to generate the
command to create the trigger is not enough. For this reason, we
append a second command to enable/disable trigger, right after
creating it.
We don't retain explicit extension dependencies set by using
`ALTER trigger DEPENDS ON EXTENSION` commands too, but apparently
right fix for that is to throw an error as in
`PreprocessAlterTriggerDependsStmt()`; so, opened a separate PR
to fix that #6399.
During alter_distributed_table, we create a new table like the
original table but with the altered options.
To retrieve the name of the distribution column, we were using
the attribute syscache of the new table, since we already created
the new table as identical to the original table.
However, the attribute syscaches of these two tables are not
the same if the original table has dropped columns. The reason
is that dropped columns are all still present in the cache.
Hence, for example, the attnos would be different in the syscaches.
So, let's use the attribute syscache of the original table.
DESCRIPTION: Fixes a bug that prevents retaining columnar table options after a table-rewrite
A fix for this issue: Columnar: options ignored during ALTER TABLE
rewrite #5927
The OID for the temporary table created during ALTER TABLE was not the
same as the original table's OID so the columnar options were not being
applied during rewrite.
The change is that I applied the original table's columnar options to
the new table so that it has the correct options during write. I also
added a test.
DESCRIPTION: Adds source_lsn and target_lsn fields into
get_rebalance_progress
Adding two fields named `source_lsn` and `target_lsn` to the function
`get_rebalance_progress`.
Target lsn data is fetched in `GetShardStatistics`, by expanding the
query sent to workers (joining with pg_subscription_rel and
pg_stat_subscription). Then put into the hashmap, for each shard.
Source lsn data is fetched in `BuildWorkerShardStatististicsHash`, in
the loop that iterate each node, by sending a pg_current_wal_lsn query
to each node. Then put into the hashmap, for each node.
On our CI our isolation_shard_rebalancer_progress would sometimes
randomly fail like this:
```diff
table_name|shardid|shard_size|sourcename|sourceport|source_shard_size|targetname|targetport|target_shard_size|progress|operation_type
----------+-------+----------+----------+----------+-----------------+----------+----------+-----------------+--------+--------------
-colocated1|1500001| 49152|localhost | 57637| 49152|localhost | 57638| 73728| 1|move
-colocated2|1500005| 376832|localhost | 57637| 376832|localhost | 57638| 401408| 1|move
+colocated1|1500001| 49152|localhost | 57637| 49152|localhost | 57638| 81920| 1|move
+colocated2|1500005| 376832|localhost | 57637| 376832|localhost | 57638| 409600| 1|move
(2 rows)
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/27688/workflows/8c5ca443-5f21-4f21-b74f-0ca7bde69648/jobs/823648/parallel-runs/1
The shard sizes would be slightly larger or smaller than expected. This
fixes this by fixing the output to the nearest expected shard size. To
do so I used a trick described in this stack overflow answer:
https://stackoverflow.com/a/33147437/2570866
When investigating I ran into one more random failure:
```diff
-step s1-shard-move-c1-block-writes: <... completed>
+step s4-shard-move-sep-block-writes: <... completed>
citus_move_shard_placement
--------------------------
(1 row)
-step s4-shard-move-sep-block-writes: <... completed>
+step s1-shard-move-c1-block-writes: <... completed>
citus_move_shard_placement
--------------------------
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/27707/workflows/c3ff4fc7-5068-4096-ab9f-803c941ddac0/jobs/824622/parallel-runs/29?filterBy=FAILED
This random failure happens, because the two parallel moves can complete
at the same time. So, it's non-deterministic which one finishes first. To
make this deterministic I used the "marker" feature from the isolation
tester.
And finally I ran into a third random failure:
```diff
table_name|shardid|shard_size|sourcename|sourceport|source_shard_size|targetname|targetport|target_shard_size|progress|operation_type
----------+-------+----------+----------+----------+-----------------+----------+----------+-----------------+--------+--------------
-colocated1|1500001| 50000|localhost | 57637| 50000|localhost | 57638| 50000| 1|move
-colocated2|1500005| 400000|localhost | 57637| 400000|localhost | 57638| 400000| 1|move
+colocated1|1500001| 50000|localhost | 57637| 50000|localhost | 57638| 8000| 1|move
+colocated2|1500005| 400000|localhost | 57637| 400000|localhost | 57638| 8000| 1|move
colocated1|1500002| 200000|localhost | 57637| 200000|localhost | 57638| 0| 0|move
colocated2|1500006| 8000|localhost | 57637| 8000|localhost | 57638| 0| 0|move
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/27707/workflows/c3ff4fc7-5068-4096-ab9f-803c941ddac0/jobs/824622/parallel-runs/30?filterBy=FAILED
This happened in two of the tests only. For now I commented these tests
out. I have some ideas on how to fix these, but these ideas require more
impactful changes than I would like in this PR. One of these tests had a
copy paste error too, in passing I fixed that in the commented out line.
This test used to contain some utility commands that Citus did not
support. However we added support for most of the commands, and this
test got outdated.
We used to error out on community when user attempted to use pooler
options. Now that we open sourced all enterprise features, the test can
now be removed.
Sometimes our CI randomly fails on a test in a way similar to this:
```diff
step s2-drop:
DROP TABLE cancel_table;
-
+ <waiting ...>
+step s2-drop: <... completed>
starting permutation: s1-timeout s1-begin s1-sleep10000 s1-rollback s1-reset s1-drop
```
Source:
https://app.circleci.com/pipelines/github/citusdata/citus/26524/workflows/5415b84f-13a3-482f-bef9-648314c79a67/jobs/756377
Another example of a failure like this:
```diff
stop_session_level_connection_to_node
-------------------------------------
(1 row)
step s3-display:
SELECT * FROM ref_table ORDER BY id, value;
SELECT * FROM dist_table ORDER BY id, value;
-
+ <waiting ...>
+step s3-display: <... completed>
id|value
--+-----
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26551/workflows/91dca4b2-bb1c-4cae-b2ef-ce3f9c689ce5/jobs/757781
A step that shouldn't be blocked is detected as "waiting..." temporarily
and then gets unblocked automatically immediately after. I'm not
certain of the reason for this, but one explanation is that the
maintenance daemon is doing something that blocks the query. In the
shown case my hunch is that it could be the deferred shard deletion.
This PR disables all the features of the maintenance daemon during
isolation testing to try and prevent process from randomly being
detected as blocking.
NOTE: I'm not certain that this will actually fix this issue. If the
issue persists even after this change, at least we know that it's not
the maintenance daemon that's blocking it.
For the sake of documentation, here is a failing diff:
```diff
step s2-view-dist:
SELECT query, citus_nodename_for_nodeid(citus_nodeid_for_gpid(global_pid)), citus_nodeport_for_nodeid(citus_nodeid_for_gpid(global_pid)), state, wait_event_type, wait_event, usename, datname FROM citus_dist_stat_activity WHERE query NOT ILIKE ALL(VALUES('%pg_prepared_xacts%'), ('%COMMIT%'), ('%BEGIN%'), ('%pg_catalog.pg_isolation_test_session_is_blocked%'), ('%citus_add_node%')) AND backend_type = 'client backend' ORDER BY query DESC;
query |citus_nodename_for_nodeid|citus_nodeport_for_nodeid|state |wait_event_type|wait_event|usename |datname
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+-------------------------+-------------------+---------------+----------+--------+----------
ALTER TABLE test_table ADD COLUMN x INT;
|localhost | 57636|idle in transaction|Client |ClientRead|postgres|regression
-(1 row)
+
+ SELECT coalesce(to_jsonb(array_agg(csa_from_one_node.*)), '[{}]'::JSONB)
+ FROM (
+ SELECT global_pid, worker_query AS is_worker_query, pg_stat_activity.* FROM
+ pg_stat_activity LEFT JOIN get_all_active_transactions() ON process_id = pid
+ ) AS csa_from_one_node;
+ |localhost | 57638|active | | |postgres|regression
+(2 rows)
```
This failure can be seen at [this CI
run](https://app.circleci.com/pipelines/github/citusdata/citus/27653/workflows/d769701c-8f6e-4f97-a412-16f7b9b288a6/jobs/821416)
PG15 now allows users to specify oids when creating databases. This
feature is a side effect of a bigger feature in pg_upgrade.
Relevant PG Commit:
pg_upgrade: Preserve database OIDs.
aa01051418f10afbdfa781b8dc109615ca785ff9
Depends on https://github.com/citusdata/the-process/pull/92Closes: #6371
Updates test dependencies to not rely on a known vulnerable dependency
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
PG15 has suppressed some casts on constants when querying foreign
tables.
For example, we can use text to represent a type that's an enum on the
remote side.
A comparison on such a column will get shipped as "var = 'foo'::text".
But there's no enum = text operator on the remote side.
If we leave off the explicit cast, the comparison will work.
Test we behave in the same way with a Citus foreign table
Reminder: foreign tables cannot be distributed/reference, can only be
Citus local
Relevant PG commit:
f8abb0f5e1
PostgreSQL 15 had some changes to jsonpath to conform with ECMA-262
referenced by SQL standard. This commit adds tests to make sure Citus
also supports the same standards.
Relevant pg commit:
e26114c817b610424010cfbe91a743f591246ff1
In Split, Logical replication logic and ShardCleaner we call
`SendCommandListToWorkerOutsideTransaction` and
`SendOptionalCommandListToWorkerOutsideTransaction` frequently. This
opens new connection for each of those calls, even though we already
have a perfectly good connection lying around.
This PR adds two new APIs
`SendCommandListToWorkerOutsideTransactionWithConnection` and
`SendOptionalCommandListToWorkerOutsideTransactionWithConnection` that
allow sending a list of queries in a transaction over an existing
connection. We also update the callers (Split, ShardCleaner, Logical
Replication) to use these new APIs instead.
Co-authored-by: Nitish Upreti <niupre@microsoft.com>
Co-authored-by: Onder Kalaci <onderkalaci@gmail.com>
In Citus 11.1.0 we changed the order of doing the initial data copy and
the replica identity creation when doing a non blocking shard move. This
was done to try and increase the speed with which shard moves could be
done. But after doing more extensive performance testing this change
turned out to have a negative impact on the speed of moves on the setups
that I tested.
Looking at the resource usage metrics of the VMs the reason for this
seems to be that these shard moves were bottlenecked by disk bandwidth.
While creating replica identities in bulk after the initial copy will
reduce CPU usage a bit, it does require an additional sequence scan of
the just written data. So when a VM is bottlenecked on disk, it makes
sense to spend a little bit more CPU to avoid an additional scan. Since
PKs are usually simple indexes that don't require lots of CPU to update,
as opposed to e.g. GiST indexes.
This reverts the order change to avoid a regression on shard move speed
in these cases.
For future releases we might consider re-evaluating our index creation
order for other indexes too, and create "simple" indexes before the
copy.
Given that we drop DEFAULT nextval('sequence') expressions from
shard relation columns, allowing `ON DELETE/UPDATE SET DEFAULT`
on such columns might cause inserting NULL values as a result
of a delete/update operation.
For this reason, we disallow ON DELETE/UPDATE SET DEFAULT actions
on columns that default to sequences.
DESCRIPTION: Disallows having ON DELETE/UPDATE SET DEFAULT actions on
columns that default to sequences
Fixes#6339.
As we did for GENERATED STORED columns in #4613, we should not drop
column
default expressions that are not based on sequences from shard relation
since
such expressions need to exist e.g. for foreign key actions.
For the column default expressions that are based on sequences we cannot
do much, so we need to disallow having ON DELETE SET DEFAULT actions on
such columns in a separate PR, see #6339.
Fixes#6318.
DESCRIPTION: Fixes a bug that might cause inserting incorrect DEFAULT
values when applying foreign key actions
PG15 added support for security invoker views. Relevant PG conmit:
7faa5fc84b
These views check the permissions for the underlying tables of the view
invoker user, not the view definer user.
When the view has underlying distributed tables, the queries to the
shards are sent by opening connections with the current user, which is
the view invoker, no matter what the type of the view is. This means
that, for distributed views, they were always behaving like security
invoker views. Check the following issue for more details:
https://github.com/citusdata/citus/issues/6161
So, Citus doesn't fully support security definer views.
However Citus does fully support security invoker views. We add tests to
make sure we cover different cases.
DESCRIPTION: Fixes dropping replication slots
As detected by a flaky test, Citus sometimes fails to drop replication
slots, possibly due to a race condition, at the end of a shard split.
With this PR, we retry to drop them in case of an `OBJECT_IN_USE` error,
consistently for 20 seconds.
fixes: #6326
Both tests include pushdown and pull to coordinator type of aggregate
execution.
Relevant PG commits:
Add min() and max() aggregates for xid8
400fc6b6487ddf16aa82c9d76e5cfbe64d94f660
Add range_agg with multirange inputs
7ae1619bc5b1794938c7387a766b8cae34e38d8a
Co-authored-by: Onder Kalaci <onderkalaci@gmail.com>
DESCRIPTION: Improve logging during shard split and resource cleanup
### DESCRIPTION
This PR makes logging improvements to Shard Split :
1. Update confusing logging to fix#6312
2. Added new `ereport(LOG` to make debugging easier as part of telemetry review.
Comment from the code is clear on this:
/*
* The statistics objects of the distributed table are not relevant
* for the distributed planning, so we can override it.
*
* Normally, we should not need this. However, the combination of
* Postgres commit 269b532aef55a579ae02a3e8e8df14101570dfd9 and
* Citus function AdjustPartitioningForDistributedPlanning()
* forces us to do this. The commit expects statistics objects
* of partitions to have "inh" flag set properly. Whereas, the
* function overrides "inh" flag. To avoid Postgres to throw error,
* we override statlist such that Postgres does not try to process
* any statistics objects during the standard_planner() on the
* coordinator. In the end, we do not need the standard_planner()
* on the coordinator to generate an optimized plan. We call
* into standard_planner() for other purposes, such as generating the
* relationRestrictionContext here.
*
* AdjustPartitioningForDistributedPlanning() is a hack that we use
* to prevent Postgres' standard_planner() to expand all the partitions
* for the distributed planning when a distributed partitioned table
* is queried. It is required for both correctness and performance
* reasons. Although we can eliminate the use of the function for
* the correctness (e.g., make sure that rest of the planner can handle
* partitions), it's performance implication is hard to avoid. Certain
* planning logic of Citus (such as router or query pushdown) relies
* heavily on the relationRestrictionList. If
* AdjustPartitioningForDistributedPlanning() is removed, all the
* partitions show up in the, causing high planning times for
* such queries.
*/
DESCRIPTION: Fixes floating exception during
create_distributed_table_concurrently.
Fixes#6332.
During create_distributed_table_concurrently, when there is no active
primary node, it fails with floating exception. We added similar check
with create_distributed_table. It will fail with proper message if
current active node is less than replication factor.
The PR introduces code changes to fix Issue
[6303](https://github.com/citusdata/citus/issues/6303)
`create_distributed_table_concurrently` following drop column, creates a
buggy situation in split decoder.
* Consider the below scenario:
* Session1 : Drop column followed by
create_distributed_table_concurrently
* Session2 : Concurrent insert workload
The child shards created by `create_distributed_table_concurrently` will
have less columns than the source shard because some column were
dropped. The incoming tuple from session2 will have more columns as the
writes happened on source shard. But now the tuple needs to be applied
on child shard. So we need to format existing tuple according to child
schema and skip dropped column values.
The PR fixes this by reformatting the tuple according the target child
schema.
Test:
1) isolation_create_distributed_concurrently_after_drop_column - Repros
the issue and tests on the same.
No need for description, fixing issue introduced with new feature for
11.1
Fixes#6333
Due to Postgres' C api being o-indexed and postgres' attributes being
1-indexed, we were reading the wrong Datum as the Task owner when
cancelling. Here we add a test to show the error and fix the off-by-one
error.
When I built Citus on PG15beta4 locally, I get a warning message.
```
utils/background_jobs.c:902:5: warning: declaration does not declare anything
[-Wmissing-declarations]
__attribute__((fallthrough));
^
1 warning generated.
```
This is a hint to the compiler that we are deliberately falling through
in a switch-case block.
DESCRIPTION: Show citus_copy_shard_placement progress in
get_rebalance_progress
When rebalancing to a new node that does not have reference tables yet
the rebalancer will first copy the reference tables to the nodes.
Depending on the size of the reference tables, this might take a long
time. However, there's no indication of what's happening at this stage
of the rebalance.
This PR improves this situation by also showing the progress of any
citus_copy_shard_placement calls when calling get_rebalance_progress.
We can now do the following:
- Distribute sequence with logged/unlogged option
- ALTER TABLE my_sequence SET LOGGED/UNLOGGED
- ALTER SEQUENCE my_sequence SET LOGGED/UNLOGGED
Relevant PG commit
344d62fb9a
PG15 introduces `CLUSTER` commands for partitioned tables. Similar to a
`CLUSTER` command with no supplied table names, these commands also can
not be run inside transaction blocks and therefore can not be propagated
in a distributed transaction block with ease. Therefore we raise warnings.
Relevant PG commit: cfdd03f45e6afc632fbe70519250ec19167d6765
DESCRIPTION: Add a rebalancer that uses background tasks for its
execution
Based on the baclground jobs and tasks introduced in #6296 we implement
a new rebalancer on top of the primitives of background execution. This
allows the user to initiate a rebalance and let Citus execute the long
running steps in the background until completion.
Users can invoke the new background rebalancer with `SELECT
citus_rebalance_start();`. It will output information on its job id and
how to track progress. Also it returns its job id for automation
purposes. If you simply want to wait till the rebalance is done you can
use `SELECT citus_rebalance_wait();`
A running rebalance can be canelled/stopped with `SELECT
citus_rebalance_stop();`.
Reverting the following commits:
977ddaae564a5cf06def9ae19c181f30447117e5f9c43f433221dba4ed08262932da3e
We have to manually make changes to this file.
Follow the relevant PG commit in ruleutils.c & make the exact same changes in ruleutils_15.c
Relevant PG commit:
96ef3237bf741c12390003e90a4d7115c0c854b7
PG 15 added support for that (d6f96ed94e73052f99a2e545ed17a8b2fdc1fb8a).
We also add support, but we already do not support ON DELETE SET NULL/DEFAULT
for distribution column. So, in essence, we add support for reference tables
and Citus local tables.
The logical replication catchup part for shard splits and shard moves is
very similar. This abstracts most of that similarity away into a single
function. This also improves the logic for non blocking shard splits a
bit, by using faster foreign key creation. It also parallelizes index creation
which shard moves were already doing, but shard splits did not.
DESCRIPTION: Add infrastructure to run long running management operations in background
This infrastructure introduces the primitives of jobs and tasks.
A task consists of a sql statement and an owner. Tasks belong to a
Job and can depend on other tasks from the same job.
When there are either runnable or running tasks we would like to
make sure a bacgrkound task queue monitor process is running. A Task
could be in running state while there is actually no monitor present
due to a database restart or failover. Once the monitor starts it
will reset any running task to its runnable state.
To make sure only one background task queue monitor is ever running
at once it will acquire an advisory lock that self conflicts.
Once a task is done it will find all tasks depending on this task.
After checking that the task doesn't have unmet dependencies it will
transition the task from blocked to runnable state for the task to
be picked up on a subsequent task start.
Currently only one task can be running at a time. This can be
improved upon in later releases without changes to the higher level
API.
The initial goal for this background tasks is to allow a rebalance
to run in the background. This will be implemented in a subsequent PR.
Previously we would create foreign keys to reference table in an extra
fast way at the end of a shard move. This uses that same logic to also
do it for foreign keys between distributed tables.
Fixes#6141
Introduces a new GUC named citus.skip_constraint_validation, which basically skips constraint validation when set to on.
For some several places that we hack to skip the foreign key validation phase, now we use this GUC.
When introducing our overrides of pg_cancel_backend and
pg_terminate_backend we accidentally did that in such a way that we
cannot call the original pg_cancel_backend and pg_terminate_backend from
C anymore. This happened because we defined the exact same symbols in
our shared library as postgres does in its own binary.
This fixes that by using a different names for the C function than for
the SQL function.
Making this work in all upgrade and downgrade scenarios is not trivial
though, because we actually need to remove the C function definition.
Postgres errors in two different times when the symbol that a C function
wants to call is not defined in the library it expects it in:
1. When creating the SQL function definition
2. When calling the SQL function
Item 1 causes an issue when creating our extension for the first time.
We then go execute all the migrations that we have. So if the 11.0
migration contains a SQL function definition that still references the
pg_cancel_backend symbol, that migration will fail. This issue is solved
by actually changing the SQL definition in the old migration.
This is not enough to fix all issues though. Item 2 causes an issue
after an upgrade to 11.1, because it won't have the new definition of
the SQL function. This is solved by recreating the SQL functions in the
migration to 11.1. That way it gets the new definition.
Then finally there's the case of downgrades. To continue to make our
pg_cancel_backend SQL function work after downgrading, we will need to
make a patch release for 11.0 that includes the new citus_cancel_backend
symbol. This is done in a separate commit.
DESCRIPTION:
This PR adds support for 'Deferred Drop' and robust 'Shard Cleanup' for Splits.
Common Infrastructure
This PR introduces new common infrastructure so as any operation that wants robust cleanup of resources can register with the cleaner and have the resources cleaned appropriately based on a specified policy. 'Shard Split' is the first consumer using this new infrastructure.
Note : We only support adding 'shards' as resources to be cleaned-up right now but the framework will be extended to support other resources in future.
Deferred Drop for Split
Deferred Drop Support ensures that shards undergoing split are not dropped inline as part of operation but dropped later when no active read queries are running on shard. This helps with :
Avoids any potential deadlock scenarios that can cause long running Split operation to rollback.
Avoids Split operation blocking writes and then getting blocked (due to running queries on the shard) when trying to drop shards.
Deferred drop is the new default behavior going forward.
Shard Cleaner Extension
Shard Cleaner is a background task responsible for deferred drops in case of 'Move' operations.
The cleaner has been extended to ensure robust cleanup of shards (dummy shards and split children) in case of a failure based on the new infrastructure mentioned above. The cleaner also handles deferred drop for 'Splits'.
TESTING:
New test ''citus_split_shard_by_split_points_deferred_drop' to test deferred drop support.
New test 'failure_split_cleanup' to test shard cleanup with failures in different stages.
Update 'isolation_blocking_shard_split and isolation_non_blocking_shard_split' for deferred drop.
Added non-deferred drop version of existing tests : 'citus_split_shard_no_deferred_drop' and 'citus_non_blocking_splits_no_deferred_drop'
* Fix issue : 6109 Segfault or (assertion failure) is possible when using a SQL function
* DESCRIPTION: Ensures disallowing the usage of SQL functions referencing to a distributed table and prevents a segfault.
Using a SQL function may result in segmentation fault in some cases.
This change fixes the issue by throwing an error message when a SQL function cannot be handled.
Fixes#6109.
* DESCRIPTION: Ensures disallowing the usage of SQL functions referencing to a distributed table and prevents a segfault.
Using a SQL function may result in segmentation fault in some cases. This change fixes the issue by throwing an error message when a SQL function cannot be handled.
Fixes#6109.
Co-authored-by: Emel Simsek <emel.simsek@microsoft.com>
PG15 allows numeric scale to be negative or greater than precision. This
causes issues and we may end up routing queries to a wrong shard due to
differing hash results after rounding.
Formerly, when specifying NUMERIC(precision, scale), the scale had to be
in the range [0, precision], which was per SQL spec. PG15 extends the
range of allowed scales to [-1000, 1000].
A negative scale implies rounding before the decimal point. For
example, a column might be declared with a scale of -3 to round values
to the nearest thousand. Note that the display scale remains
non-negative, so in this case the display scale will be zero, and all
digits before the decimal point will be displayed.
Relevant PG commit: 085f931f52494e1f304e35571924efa6fcdc2b44
Pre PG15, renaming child triggers on partitions is allowed. When
creating a trigger in a distributed parent partitioned table, the
triggers on the shards of the partitions have the same name with
the triggers on the corresponding parent shards of the parent
table. Therefore, they don't have the same appended shard id as
the shard id of the partition. Hence, when trying to rename a
child trigger on a partition of a distributed table, we can't
correctly find the triggers on the shards of the partition in
order to rename them since we append a different shard id to the
name of the trigger. Since we can't find the trigger we get a
misleading error of inexistent trigger.
In this commit we prohibit renaming child triggers on distributed
partitions altogether.
Sometimes in CI our isolation_citus_dist_activity test fails randomly
like this:
```diff
step s2-view-dist:
SELECT query, citus_nodename_for_nodeid(citus_nodeid_for_gpid(global_pid)), citus_nodeport_for_nodeid(citus_nodeid_for_gpid(global_pid)), state, wait_event_type, wait_event, usename, datname FROM citus_dist_stat_activity WHERE query NOT ILIKE ALL(VALUES('%pg_prepared_xacts%'), ('%COMMIT%'), ('%BEGIN%'), ('%pg_catalog.pg_isolation_test_session_is_blocked%'), ('%citus_add_node%')) AND backend_type = 'client backend' ORDER BY query DESC;
query |citus_nodename_for_nodeid|citus_nodeport_for_nodeid|state |wait_event_type|wait_event|usename |datname
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+-------------------------+-------------------+---------------+----------+--------+----------
INSERT INTO test_table VALUES (100, 100);
|localhost | 57636|idle in transaction|Client |ClientRead|postgres|regression
-(1 row)
+
+ SELECT coalesce(to_jsonb(array_agg(csa_from_one_node.*)), '[{}]'::JSONB)
+ FROM (
+ SELECT global_pid, worker_query AS is_worker_query, pg_stat_activity.* FROM
+ pg_stat_activity LEFT JOIN get_all_active_transactions() ON process_id = pid
+ ) AS csa_from_one_node;
+ |localhost | 57636|active | | |postgres|regression
+(2 rows)
step s3-view-worker:
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26692/workflows/3406e4b4-b686-4667-bec6-8253ee0809b1/jobs/765119
I intended to fix this with #6263, but the fix turned out to be
insufficient. This PR tries to address the issue by setting
distributedCommandOriginator correctly in more situations. However, even
with this change it's still possible to reproduce the flaky test in CI.
In any case this should fix at least some instances of this issue.
In passing this changes the isolation_citus_dist_activity test to allow
running it multiple times in a row.
PRE PG15, Renaming the parent triggers on partitioned tables doesn't
recurse to renaming the child triggers on the partitions as well.
In PG15, Renaming triggers on partitioned tables
recurses to renaming the triggers on the partitions as well.
Add an upgrade test to make sure we are not breaking anything
with distributed triggers on distributed partitioned tables.
Relevant PG commit:
80ba4bb383538a2ee846fece6a7b8da9518b6866
pg_dist_node and pg_dist_colocation have a primary key index, not a replica identity index.
Citus catalog tables are created in public schema, which has replica identity index by default
as primary key index. Later the citus catalog tables are moved to pg_catalog schema.
During pg_upgrade, all tables are recreated, and given that pg_dist_colocation is found in
pg_catalog schema, it is recreated in that schema, and when it is recreated it doesn't
have a replica identity index, because catalog tables have no replica identity.
Further action:
Do we even need to acquire this lock on the primary key index?
Postgres doesn't acquire such locks on indexes before deleting catalog tuples.
Also, catalog tuples don't have replica identities by definition.
In commit 31faa88a4e I removed some features of the rebalance progress
monitor. I did this because the plan was to remove the foreground shard
rebalancer later in the PR that would add the background shard
rebalancer. So, I didn't want to spend time fixing something that we
would throw away anyway.
As it turns out we're not removing the foreground shard rebalancer after
all, so it made sens to fix the stuff that I broke. This PR does that.
For the most part this commit reverts the changes in commit 31faa88a4e.
It's not a full revert though, because it keeps the improved tests and
the changes to `citus_move_shard_placement`.
Before, this was the default mode for CustomScan providers.
Now, the default is to assume that they can't project.
This causes performance penalties due to adding unnecessary
Result nodes.
Hence we use the newly added flag, CUSTOMPATH_SUPPORT_PROJECTION
to get it back to how it was.
In PG15 support branch we created explain functions to ignore
the new Result nodes, so we undo that in this commit.
Relevant PG commit:
955b3e0f9269639fb916cee3dea37aee50b82df0
Sometimes in CI our multi_utilities test fails like this:
```diff
VACUUM (INDEX_CLEANUP ON, PARALLEL 1) local_vacuum_table;
SELECT CASE WHEN s BETWEEN 20000000 AND 25000000 THEN 22500000 ELSE s END size
FROM pg_total_relation_size('local_vacuum_table') s ;
size
----------
- 22500000
+ 39518208
(1 row)
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26641/workflows/5caea99c-9f58-4baa-839a-805aea714628/jobs/762870
Apparently VACUUM is not as reliable in cleaning up as we thought. This
increases the range of allowed values. Important to note is that the
range is still completely outside of the allowed range of the initial
size. So we know for sure that some data was cleaned up.
Sometimes in CI our adaptive_executor test would fail randomly with the
following error:
```diff
SELECT sum(result::bigint) FROM run_command_on_workers($$
SELECT count(*) FROM pg_stat_activity
WHERE pid <> pg_backend_pid() AND query LIKE '%8010090%'
$$);
sum
-----
- 4
+ 2
(1 row)
END;
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26665/workflows/40665680-0044-4852-8fe4-5fd628f9fb47/jobs/764371
This means that the low slow start interval did not have any effect on
the number of connections being opened. I could see two possibilities
for this to happen:
1. CI was slow and actually doing the start of the second connection. I
tried to solve this by doubling the time a query to the worker takes.
2. The second option is that the shards were queried in the oposite
order than we expect. This would mean that the first query to the
worker completes quickly because there's no, sleep because it doesn't
contain any rows. I tried to solve this option by adding a row to
each shard.
After trying to reproduce the random failure in CI it turned out that I
needed both of these fixes to resolve the random failure.
On CI our citus_split_shard_columnar_partitioned test would sometimes
randomly fail like this:
```diff
8970008 | colocated_dist_table | -2147483648 | 2147483647 | localhost | 57637
8970009 | colocated_partitioned_table | -2147483648 | 2147483647 | localhost | 57637
8970010 | colocated_partitioned_table_2020_01_01 | -2147483648 | 2147483647 | localhost | 57637
- 8970011 | reference_table | | | localhost | 57637
8970011 | reference_table | | | localhost | 57638
+ 8970011 | reference_table | | | localhost | 57637
(13 rows)
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26651/workflows/f695b4fb-ad81-46ff-b97e-0100e5d167ea/jobs/763517
This is a harmless diff due to a missing column in the order by list.
This fixes that by adding the nodeport as a tiebreaker.
Added create_distributed_table_concurrently which is nonblocking variant of create_distributed_table.
It bases on the split API which takes advantage of logical replication to support nonblocking split operations.
Co-authored-by: Marco Slot <marco.slot@gmail.com>
Co-authored-by: aykutbozkurt <aykut.bozkurt1995@gmail.com>
Sometimes in CI our isolation_citus_dist_activity test fails randomly
like this:
```diff
step s2-view-dist:
SELECT query, citus_nodename_for_nodeid(citus_nodeid_for_gpid(global_pid)), citus_nodeport_for_nodeid(citus_nodeid_for_gpid(global_pid)), state, wait_event_type, wait_event, usename, datname FROM citus_dist_stat_activity WHERE query NOT ILIKE ALL(VALUES('%pg_prepared_xacts%'), ('%COMMIT%'), ('%BEGIN%'), ('%pg_catalog.pg_isolation_test_session_is_blocked%'), ('%citus_add_node%')) AND backend_type = 'client backend' ORDER BY query DESC;
query |citus_nodename_for_nodeid|citus_nodeport_for_nodeid|state |wait_event_type|wait_event|usename |datname
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+-------------------------+-------------------------+-------------------+---------------+----------+--------+----------
INSERT INTO test_table VALUES (100, 100);
|localhost | 57636|idle in transaction|Client |ClientRead|postgres|regression
-(1 row)
+
+ SELECT coalesce(to_jsonb(array_agg(csa_from_one_node.*)), '[{}]'::JSONB)
+ FROM (
+ SELECT global_pid, worker_query AS is_worker_query, pg_stat_activity.* FROM
+ pg_stat_activity LEFT JOIN get_all_active_transactions() ON process_id = pid
+ ) AS csa_from_one_node;
+ |localhost | 57636|active | | |postgres|regression
+(2 rows)
step s3-view-worker:
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26605/workflows/56d284d2-5bb3-4e64-a0ea-7b9b1626e7cd/jobs/760633
The reason for this is that citus_dist_stat_activity sometimes shows the
query that it uses itself to get the data from pg_stat_activity. This is
actually a bug, because it's a worker query and thus shouldn't show up
there. To try and solve this bug, we remove two small opportunities for a
race condition. These race conditions could happen when the backenddata
was marked as active, but the distributedCommandOriginator was not set
correctly yet/anymore. There was an opportunity for this to happen both
during connection start and shutdown.
Sometimes in CI our drop_partitioned_talbe test would fail with the
following error:
```diff
NOTICE: issuing SELECT worker_drop_distributed_table('drop_partitioned_table.child1')
NOTICE: issuing SELECT worker_drop_distributed_table('drop_partitioned_table.child1')
NOTICE: issuing DROP TABLE IF EXISTS drop_partitioned_table.child1_727001 CASCADE
-NOTICE: issuing SELECT pg_catalog.citus_internal_delete_colocation_metadata(100047)
-NOTICE: issuing SELECT pg_catalog.citus_internal_delete_colocation_metadata(100047)
+NOTICE: issuing SELECT pg_catalog.citus_internal_delete_colocation_metadata(100046)
+NOTICE: issuing SELECT pg_catalog.citus_internal_delete_colocation_metadata(100046)
ROLLBACK;
NOTICE: issuing ROLLBACK
NOTICE: issuing ROLLBACK
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26631/workflows/31536032-e1ba-493b-b12a-f40757f3a7d6/jobs/762170
For some reason the colocationid of the distributed partitioned table
would be one less than we expected. Why this happens I'm not sure, but
it seems fairly harmless that it does.
In an attempt to work around this flakyness I now reset the colocation
id sequence right before creating the table in question. This is good
practice in general, because it allows us to run the test successfully
using `check-minimal` and it also allows us to rerun it multiple times.
Our python based tests didn't always copy the normalized files after the
regress run. I had the problem where running the following command would
result in non-normalized files in the expected directory after running
our PG upgrade tests locally:
```
cp src/test/regress/{results,expected}/upgrade_list_citus_objects.out
```
This PR fixes that by always running `copy_modified` even if the tests
fail. The same was already being done for our perl based tests at the
end of the `pg_regress_multi.pl` file.
We currently do a `pg_relation_total_size('t1') + pg_relation_total_size('t2') + ..` on shard lists, especially when rebalancing the shards. This in some cases goes huge. With this PR, we basically use a SUM for all table sizes, instead of using thousands of pluses.
Sometimes in CI failure_online_move_shard_placement fails with the
following error:
```diff
SELECT citus.mitmproxy('conn.onQuery(query="^ALTER SUBSCRIPTION .* ENABLE").cancel(' || :pid || ')');
mitmproxy
-----------
(1 row)
SELECT master_move_shard_placement(101, 'localhost', :worker_1_port, 'localhost', :worker_2_proxy_port);
-ERROR: canceling statement due to user request
+ERROR: tuple concurrently updated
+CONTEXT: while executing command on localhost:9060
-- failure on polling subscription state
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26441/workflows/dd6e3475-6121-47b3-aea3-4ac92be114f4/jobs/751476/steps
This error is not completely harmless, because based on the logs it mean
that our cleanup logic failed, which in turn means that replication
slots are left around:
```
2022-08-24 16:01:29.247 UTC [1219] ERROR: XX000: tuple concurrently updated
2022-08-24 16:01:29.247 UTC [1219] LOCATION: simple_heap_update, heapam.c:4179
2022-08-24 16:01:29.247 UTC [1219] STATEMENT: ALTER SUBSCRIPTION citus_shard_move_subscription_10 DISABLE
```
However, we have other mechanisms to clean up any leftovers in case of a
failed cleanup. So it's not that big of a problem.
The reason we run into this error is arguably because of a Postgres bug,
so I created a patch for Postgres that fixes this.
While we wait for this (or a similar) patch to be merged, this PR
disables the flaky test. There's still a test that tests in case of a
connection "kill" instead of a "cancel", so I don't think we lose very
important coverage by disabling this test. When trying to reproduce this
I only hit this issue in the cancel case, so I don't think there's a
need to disable the kill case for now.
In CI sometimes failure_connection_establishment would fail with the
following error:
```diff
-- cancel all connections to this node
SELECT citus.mitmproxy('conn.onAuthenticationOk().cancel(' || pg_backend_pid() || ')');
- mitmproxy
----------------------------------------------------------------------
-
-(1 row)
-
+ERROR: canceling statement due to user request
+CONTEXT: COPY mitmproxy_result, line 1: ""
+SQL statement "COPY mitmproxy_result FROM '/home/circleci/project/src/test/regress/tmp_check/mitmproxy.fifo'"
+PL/pgSQL function citus.mitmproxy(text) line 11 at EXECUTE
SELECT * FROM citus_check_cluster_node_health();
```
The reason for this is that the mitm command that was used is very
broad and doesn't actually do what the comment says. What happens is
that if any connection is made, the current backend is cancelled, which
is not the always the same as the backend that made the connection. My
assessment is that likely the maintenance daemon makes a connection to
the node while we are executing the mitmproxy command. The mitmproxy
command goes through, and then triggers a cancel of itself due to the
connection made by the maintenance daemon.
This PR simply removes this test, since it doesn't seem to test what it
intended to test anyway. There's also still the "kill" version of this
test, which does do the intended thing. So I don't think we lose
important coverage by removing this test.
Sometimes in CI multi_transaction_recovery would fail with the following
error:
```diff
SET LOCAL citus.defer_drop_after_shard_move TO OFF;
SELECT citus_move_shard_placement((SELECT * FROM selected_shard), 'localhost', :worker_1_port, 'localhost', :worker_2_port, shard_transfer_mode := 'block_writes');
- citus_move_shard_placement
----------------------------------------------------------------------
-
-(1 row)
-
+ERROR: could not find placement matching "localhost:57637"
+HINT: Confirm the placement still exists and try again.
COMMIT;
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26510/workflows/8269ea93-d9b4-4376-ae0e-8332a5c15fc6/jobs/755548
The reason for this was that when choosing `selected_shard` we didn't
ensure that it was actually located on the node that we were moving it
from. Instead we simply picked the first shard for the table that was
returned by the query.
To fix this issue this PR adds a filter to only choose shards that are
located on the intended node.
Our isolation_distributed_deadlock_detection test would fail randomly in
CI in three different ways.
The first type of failure looked like this:
```diff
check_distributed_deadlocks
---------------------------
t
(1 row)
-step s1-update-5: <... completed>
step s5-update-1: <... completed>
ERROR: canceling the transaction since it was involved in a distributed deadlock
+step s1-update-5: <... completed>
step s1-commit:
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26399/workflows/d213ee85-397a-467a-9ffb-39e4f44e6688/jobs/749533
This random change in output was harmless and happened because when the
deadlock detector cancelled a query, two queries would continue: The one
that was cancelled would throw an error (and thus complete), and the one
that was unblocked would now complete.
It was random which of the two the isolation tester would first detect
as completed. To resolve this PR starts using the ["marker" feature][1],
this allows us to make sure one of the steps won't be marked as
completed until the other one completed first.
The second random failure was very similar:
```diff
check_distributed_deadlocks
---------------------------
t
(1 row)
-step s2-update-2: <... completed>
-step s3-update-3: <... completed>
-ERROR: canceling the transaction since it was involved in a distributed deadlock
step s6-commit:
COMMIT;
step s5-update-6: <... completed>
+step s2-update-2: <... completed>
+step s3-update-3: <... completed>
+ERROR: canceling the transaction since it was involved in a distributed deadlock
step s5-commit:
```
Again a harmless difference in test output. In this case it's possible
that the deadlock detector would not detect the unblocked processes
right away, and would thus continue with to the next step. This step was
a commit on a session that was not blocked, and which thus could
complete without issues.
To solve this I changed the order of the commits at the end of the
permutation, to always have the first session that would commit be the
session that would be unblocked the last. This ensures that no commit
will ever be executed before completing all the queries.
The third issue was different and looked like this:
```diff
step s4-update-5: <... completed>
step s4-commit:
COMMIT;
+step s1-update-4: <... completed>
+isolationtester: canceling step s3-update-4 after 5 seconds
step s3-update-4: <... completed>
+ERROR: canceling statement due to user request
+step s2-update-2: <... completed>
step s3-commit:
COMMIT;
-step s2-update-2: <... completed>
-step s1-update-4: <... completed>
step s1-commit:
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26411/workflows/9089beec-4f0f-4027-b4ce-0e84889afc06/jobs/750143
The reason for this failure is not entirely clear to me, but I was able
to remove the flakyness without impacting the goal of the test. What was
happening was that both `s1` and `s3` were waiting for `s4` to commit
and release it's lock on the row 4. For some reason it wasn't
deterministic which of the two sessions would be granted the lock after
it was released by row 4. The test expected `s3` to be granted the lock,
but sometimes it would be granted to `s1` instead. Which would in turn
cause `s3` to still be blocked.
To solve this I simply removed `s1` completely from this test. It wasn't
actually part of the cycle that the deadlock detector should detect and
was an unrelated appendage:
```mermaid
graph TD;
s2-->s3;
s3-->s4;
s1-->s4;
s4-->s5;
s5-->s6;
s6-->s5;
```
By removing `s1` completely there was no contention for the lock and
`s3` could always acquire it.
[1]: a73d6c87f2/src/test/isolation/README (L163-L188)
In CI multi_utilities would sometimes fail randomly with this error:
```diff
VACUUM (INDEX_CLEANUP ON, PARALLEL 1) local_vacuum_table;
SELECT pg_size_pretty( pg_total_relation_size('local_vacuum_table') );
pg_size_pretty
----------------
- 21 MB
+ 22 MB
(1 row)
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26459/workflows/da47d9b6-f70b-49fe-806f-5ebf75bf0b11/jobs/752482
This is a harmless change in output where the relation size after
vacuuming was slightly more than we expected. This changes the size
checks for the local_vacuum_table to allow a wider range of values.
It uses the same trick as #6216 to show the actual value when it's
outside this valid range, which is useful if this test ever starts
failing again.
When trying to fix#6245 I realized that multi_utilities was leaking
some tables that it created during the test. This fixes that by
creating all these tables in a schema that's dedicated for this test.
When running `make check-base` locally it would fail with two different
errors.
The first one was this:
```diff
SELECT create_distributed_table('pg_class', 'relname');
-ERROR: cannot create a citus table from a catalog table
+ERROR: deadlock detected
+DETAIL: Process 28950 waits for ExclusiveLock on relation 16551 of database 16384; blocked by process 28951.
+Process 28951 waits for RowExclusiveLock on relation 1259 of database 16384; blocked by process 28950.
+HINT: See server log for query details.
SELECT create_reference_table('pg_class');
```
This happened because multi_behavioral_analytics_create_table and
multi_create_table were being run in parallel. Running them separately
resolved this issue.
The second one was this:
```diff
CREATE OR REPLACE FUNCTION wait_until_metadata_sync(timeout INTEGER DEFAULT 15000)
RETURNS void
LANGUAGE C STRICT
AS 'citus';
+ERROR: duplicate key value violates unique constraint "pg_proc_proname_args_nsp_index"
+DETAIL: Key (proname, proargtypes, pronamespace)=(wait_until_metadata_sync, 23, 2200) already exists.
-- Add some helper functions for sending commands to mitmproxy
```
Which was because failure_test_helpers and multi_test_helpers were
trying to create the same function at the exact same time. The easy fix
here is to simply not create this function in the failure_test_helpers
file. This is fine, because any test schedule that runs
failure_test_helpers also runs multi_test_helpers.
I upgraded my OS to Ubuntu 22.04 a while back and since then some tests
order output slightly differently. I think it might be because of the
glibc upgrade that changed ordering for things like underscores and
spaces.
Changing the locale to C.UTF-8 solves this issue.
* Alter_distributed_table colocateWith:none bug fix for partitioned tables.
* Regression tests added for alter_distributed_table colocateWith:none for partitioned tables
* Update query comparision to be more accurate
Postgres supports JSON_TABLE feature on PG 15.
We treat JSON_TABLE the same as correlated functions (e.g., recurring tuples).
In the end, for multi-shard JSON_TABLE commands, we apply the same
restrictions as reference tables (e.g., cannot be in the outer part of
an outer join etc.)
Co-authored-by: Onder Kalaci <onderkalaci@gmail.com>
* Adjust configure script to allow PG15
* Adds copy of ruleutils_14.c as ruleutils_15.c
* Uses get_namespace_name_or_temp in ruleutils_15.c
Relevant PG commit:
48c5c9068211e0a04fd9553c8714b2821ed3ad17
* Clean up code using "(expr) ? true : false" in ruleutils_15.c
Relevant PG commit:
fd0625c7a9c679c0c1e896014b8f49a489c3a245
* Change varno from Index (unsigned int) to int in ruleutils_15.c
Relevant PG commit:
e3ec3c00d85bd2844ffddee83df2bd67c4f8297f
* Adds find_recursive_union to ruleutils_15.c
Relevant PG commit:
3f50b82639637c9908afa2087de7588450aa866b
* Fix display of SQL-std func's args in INSERT/SELECT in ruleutils_15.c
Relevant PG commit:
a8d8445a7b2f80f6d0bfe97b19f90bd2cbef8759
* Fix ruleutils_15.c's dumping of whole-row Vars in more contexts
Relevant PG commit:
43c2175121c829c8591fc5117b725f1f22bfb670
* Fix assorted missing logic for GroupingFunc nodes in ruleutils_15.c
Relevant PG commit:
2591ee8ec44d8cbc8e1226550337a64c684746e4
* Adds grammar support for SQL/JSON clauses in ruleutils_15.c
Relevant PG commit:
f79b803dcc98d707450e158db3638dc67ff8380b
* Adds SQL/JSON constructors to ruleutils_15.c
Relevant PG commits:
f4fb45d15c59d7add2e1b81a9d477d0119a9691a
cc7401d5ca498a84d9b47fd2e01cebd8e830e558
* Adds support for MERGE in ruleutils_15.c
Relevant PG commit:
7103ebb7aae8ab8076b7e85f335ceb8fe799097c
* Add IS JSON predicate to ruleutils_15.c
Relevant PG commit:
33a377608fc29cdd1f6b63be561eab0aee5c81f0
* Add SQL/JSON query functions to ruleutils_15.c
Relevant PG commit:
1a36bc9dba8eae90963a586d37b6457b32b2fed4
* Adds three different SQL/JSON values to ruleutils_15.c
Relevant PG commits:
606948b058dc16bce494270eea577011a602810e
49082c2cc3d8167cca70cfe697afb064710828ca
* Adds JSON table functions in ruleutils_15.c
Relevant PG commit:
4e34747c88a03ede6e9d731727815e37273d4bc9
* Add PLAN function for JSON table in ruleutils_15.c
Relevant PG commit:
fadb48b00e02ccfd152baa80942de30205ab3c4f
* Remove extra blank lines before block-closing braces ruleutils_15.c
Relevant PG commit:
24d2b2680a8d0e01b30ce8a41c4eb3b47aca5031
* set_deparse_plan: Reuse variable to appease Coverity ruleutils_15.c
Relevant PG commit:
e70813fbc4aaca35ec012d5a426706bd54e4acab
* Mechanical code beautification ruleutils_15.c
Relevant PG commit:
23e7b38bfe396f919fdb66057174d29e17086418
* Rename value_type to item_type in ruleutils_15.c
Relevant PG commit:
3ab9a63cb638a1fd99475668e2da9c237495aeda
* Show 'AS "?column?"' explicitly when it's important in ruleutils_15.c
Relevant PG commit:
c7461fc25558832dd347a9c8150b0f1ed85e36e8
* Fix ruleutils_15.c issues with dropped cols in funcs-returning-composite
Relevant PG commit:
c1d1e8469c77ce6b8e5310955580b4a3eee7fe96
* Change comment regarding functions returning composite in ruleutils_15.c
Relevant PG commit:
c2fa113ddb1117b1f03e91960f65d5d7d8a90270
* Replace int nodes with bool nodes where needed
In PG15, Boolean nodes are added. Pre PG15, internal Boolean values
in Create Role commands were represented by Integer nodes. This
commit replaces int nodes logic with bool nodes logic where needed.
Mostly there are CREATE ROLE logic changes.
Relevant PG commit:
941460fcf731a32e6a90691508d5cfa3d1f8eeaf
* Handle new option colliculocale in CREATE COLLATION logic
In PG15, there is an added option to use ICU as global locale provider.
pg_collation has three locale-related fields: collcollate and collctype,
which are libc-related fields, and a new one colliculocale, which is the
ICU-related field. Only the libc-related fields or the ICU-related field
is set, never both.
Relevant PG commits:
f2553d43060edb210b36c63187d52a632448e1d2
54637508f87bd5f07fb9406bac6b08240283be3b
* Add PG15 tests to CI using test images that have 15beta2 (#6093)
* Change warning message in pg_signal_backend()
Relevant PG commit:
7fa945b857cc1b2964799411f1633468826861ff
* Revert "Add missing ifdef for PG 15"
This reverts commit c7b51025ab.
* Fixes tests for ALTER TRIGGER RENAME consistency for part. tables
Relevant PG commit:
80ba4bb383538a2ee846fece6a7b8da9518b6866
* Prevent creating child triggers on partitions when adding new node
Pre PG15, tgisinternal is true for a "child" trigger on a partition
cloned from the trigger on the parent.
In PG15, tgisinternal is false in that case. However, we don't want to
create this trigger on the partition since it will create a conflict
when we try to attach the partition to the parent table:
ERROR: trigger "..." for relation "{partition_name}" already exists
Relevant PG commit:
f4566345cf40b068368cb5617e61318da60676ec
* Fix tests for generated columns dependency changes
In PG15, For GENERATED columns, all dependencies of the generation
expression are recorded as NORMAL dependencies of the column itself.
This requires CASCADE to drop generated cols with the original col.
PRE PG15, dependencies were recorded as AUTO, with which
generated columns are silently dropped with the original column.
Relevant PG commit:
cb02fcb4c95bae08adaca1202c2081cfc81a28b5
* Explicitly cast catalog "char" column to text before concatenation
Relevant PG commit:
07eee5a0dc642d26f44d65c4e6263304208e8583
* Remove 'AS "?column?"' from test outputs
There were some instances in the following tst outputs
in planning debug outputs where AS "?column?" is added.
We add a normalization rule to remove it as it is not
important.
cte_inline.out
recursive_relation_planning_restriction_pushdown.out
Relevant PG commit:
c7461fc25558832dd347a9c8150b0f1ed85e36e8
* Use pg_backup_stop(PG15) instead of pg_stop_backup(PG<15)
Add an alternative test output because of the change in the
backup modes of Postgres. Specifically here, there is a renaming
issue: pg_stop_backup PRE PG15 vs pg_backup_stop PG15+
The alternative output can be deleted when we drop support for PG14
Relevant PG commit:
39969e2a1e4d7f5a37f3ef37d53bbfe171e7d77a
* Adds citus.mitmfifo GUC
Previously we setting this configuration parameter
in the fly for failure tests schedule.
However, PG15 doesn't allow that anymore: reserved prefixes
like "citus" cannot be used to set non-existing GUCs.
Relevant PG commit:
88103567cb8fa5be46dc9fac3e3b8774951a2be7
* Handles EXPLAIN output diffs in PG15 - Extra result lines
To handle extra "Result" lines in explain outputs, we add explain
method to multi_test_helpers.sql file
- plan_without_result_lines() is added for cases where we want the
whole explain output with only "Result" lines removed
* Handles EXPLAIN output diffs in PG15, Hash Agg/Join leverage
To handle differences in usage of GroupAggregate vs HashAggregate
or Merge Join vs Hash join in cases where this detail doesn't
seem to matter, we use coordinator_plan().
- coordinator_plan() is updated to remove "Result" lines
There are some cases where we have subplans so we add a new
function that prints all Task Count lines as well
- coordinator_plan_with_subplans()
Still not sure of the relevant PG commit
Could be db0d67db2401eb6238ccc04c6407a4fd4f985832
but disabling enable_group_by_reordering didn't help.
* Handles EXPLAIN output diffs in PG15: enable_group_by_reordering
Relevant PG commit
db0d67db2401eb6238ccc04c6407a4fd4f985832
* Normalizes Memory Usage, Buckets, Batches for PG15 explain diffs
We create a new function in multi_test_helpers, which is similar
to explain_merge function in PG15. This explain helper function
normalies Memory Usage, Buckets and Batches, and we use it in the
tests which give a different output for PG15.
* Bump test images to 15beta3 (#6172)
* Omit namespace in post-copy errmsg
Relevant PG commit:
069d33d0c5a021601245e44df77a0423ddd69359
* Handles EXPLAIN output diffs in PG15: extra arrows&result lines
To handle extra "->" arrows resulting from extra Result lines
in explain outputs, we add the following explain method to
multi_test_helpers.sql file
- plan_without_arrows() is added for cases where we want the
whole explain output without arrows and without Result lines
* Alters public schema's owner to pg_database_owner in PG15
In PG15, public schema is owned by pg_database_owner role.
In multi_extension, we drop and recreate the ppublic schema,
hence its owner become the default user in our tests, postgres.
Change that to pg_database_owner for PG15 consistency.
This results in alternative test output for public schema grants
in the following test:
grant_on_schema_propagation.sql
Relevant PG commit: b073c3ccd06e4cb845e121387a43faa8c68a7b62
* Add alternative test outputs for change in Insert Select display
citus_local_tables_queries.sql
coordinator_shouldhaveshards.sql
cte_inline.sql
insert_select_repartition.sql
intermediate_result_pruning.sql
local_shard_execution.sql
local_shard_execution_replicated.sql
multi_deparse_shard_query.sql
multi_insert_select.sql
multi_insert_select_conflict.sql
multi_mx_insert_select_repartition.sql
mx_coordinator_shouldhaveshards.sql
single_node.sql
Relevant PG commit:
a8d8445a7b2f80f6d0bfe97b19f90bd2cbef8759
* Fixes columnar tap tests for PG15
In PG15, Perl test modules have been moved to a new namespace.
Also, postgres node new() and get_new_node() methods have been
unified to one method: new()
We create separate tap tests for PG13/14 and PG15+
and update the Makefiles accordingly.
Relevant PG commits:
201a76183e2056c2217129e12d68c25ec9c559c8
b3b4d8e68ae83f432f43f035c7eb481ef93e1583
* Handles EXPLAIN output diffs in PG15: HashAgg Leverage,alt. output
Still not sure of the relevant PG commit
Could be db0d67db2401eb6238ccc04c6407a4fd4f985832
but disabling enable_group_by_reordering didn't help.
In CI multi_replicate_reference_table would sometimes fail like this:
```diff
-- detects correctly that referecence table doesn't have replica identity
SELECT replicate_reference_tables();
-ERROR: cannot use logical replication to transfer shards of the relation initially_not_replicated_reference_table since it doesn't have a REPLICA IDENTITY or PRIMARY KEY
+ERROR: cannot use logical replication to transfer shards of the relation ref_table since it doesn't have a REPLICA IDENTITY or PRIMARY KEY
DETAIL: UPDATE and DELETE commands on the shard will error out during logical replication unless there is a REPLICA IDENTITY or PRIMARY KEY.
HINT: If you wish to continue without a replica identity set the shard_transfer_mode to 'force_logical' or 'block_writes'.
```
Because `CitusTableTypeIdList` returns tables in heap order so it's
a bit random which one is first in the list. And the test contained
multiple tables that didn't have a primary key or replica identity. So
it made sense that the error could be for either one of these tables.
This PR makes the test output consistent by changing one of the tables
to have a primary key.
Example of failing test: https://app.circleci.com/pipelines/github/citusdata/citus/26387/workflows/fc3196e7-ddf2-4000-a70b-5ac71c836321/jobs/748940
The isolation_tenant_isolation_nonblocking test would sometimes randomly
fail in CI, because we have a limit of runtime limit of 2 minutes per test.
```
test isolation_tenant_isolation_nonblocking ... make: *** [Makefile:171: check-enterprise-isolation] Terminated
Too long with no output (exceeded 2m0s): context deadline exceeded
```
One solution would obviously be to increase the timeout, but instead I
spent some time to increase the speed of our tests by tweaking some
timings. On my local machine the time it took to run the
isolation_tenant_isolation_nonblocking test went from 75s to 15s.
So now we should easily stay within the 2 minute per test limit.
I also checked if the new settings improved other logical replication
tests, but the impect differs wildly per test. One other example of a
test that runs much quicker due to the change is
isolation_non_blocking_shard_split_fkey. But the shard move tests I
tried are impacted much less.
Example of failed tests: https://app.circleci.com/pipelines/github/citusdata/citus/26373/workflows/4fa660e4-63c8-4844-bef8-70a7bea902b7/jobs/748199
One of our arbitrary config tests would sometimes fail like this in CI:
```diff
su_nationkey,
cust_nation,
l_year;
- supp_nation | cust_nation | l_year | revenue
----------------------------------------------------------------------
- 9 | C | 2008 | 3.00
-(1 row)
-
+ERROR: cannot connect to localhost:10212 to fetch intermediate results
+CONTEXT: while executing command on localhost:10211
```
When looking at the logs it seems like we were running out of
connections:
```
2022-08-23 14:03:52.856 UTC [28122] FATAL: sorry, too many clients already
2022-08-23 14:03:52.860 UTC [21027] ERROR: cannot connect to localhost:10212 to fetch intermediate results
```
This happened with `CitusThreeWorkersManyShards` config. This test on
purpose tries to push the limits of Citus quite far. And the
`ch_benchmarks_1` test is also run in parallel with a few more ones. So
it's not too weird that it ran out of connections. This doubles the
connection limit in the arbitrary config tests to hopefully not hit this
error again.
Example of failed test: https://app.circleci.com/pipelines/github/citusdata/citus/26365/workflows/7a1b5688-85cc-4bc3-ade5-9bd1d83cd0ed/jobs/747908/parallel-runs/1
Using binary encoding can save a lot of CPU cycles, both on the sender
and on the receiver. Since the walsender and walreceiver processes are
single threaded, this can matter a lot for the throughput if they are
bottlenecked on CPU.
This feature is only available in PG14, not PG13. It should be safe to
always enable because it's only used for types that support binary
encoding according to the PG docs:
> Even when this option is enabled, only data types that have binary
> send and receive functions will be transferred in binary.
But in case it causes problems, it can still be disabled by setting
`citus.enable_binary_protocol` to `false`.
In CI our failure_connection_establishment sometimes failed randomly
with the following error:
```diff
-- verify a connection attempt was made to the intercepted node, this would have cause the
-- connection to have been delayed and thus caused a timeout
SELECT * FROM citus.dump_network_traffic() WHERE conn=0;
conn | source | message
------+--------+---------
- 0 | coordinator | [initial message]
-(1 row)
+(0 rows)
SELECT citus.mitmproxy('conn.allow()');
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26318/workflows/d3354024-9a67-4b01-9416-5cf79aec6bd8/jobs/745558
The way I fixed this was by removing the dump_network_traffic call. This
might sound simple, but doing this while continuing to let the test
serve its intended purpose required quite some more changes.
This dump_network_traffic call was there because we didn't want to show
warnings in the queries above, because the exact warnings were not
reliable. The main reason this error was not reliable was because we
were using round-robin task assignment. We did the same query twice, so
that it would hit the node with the intercepted connection in one of
those connections. Instead of doing that I'm now using the
"first-replica" policy and do the queries only once. This works, because
the first placements by placementid for each of the used tables are on
the second node, so first-replica will cause the first connection to go
there.
This solved most of the flakyness, but when confirming that the
flakyness was fixed I found some additional errors:
```diff
-- show that INSERT failed
SELECT citus.mitmproxy('conn.allow()');
mitmproxy
-----------
(1 row)
SELECT count(*) FROM single_replicatated WHERE key = 100;
- count
----------------------------------------------------------------------
- 0
-(1 row)
-
+ERROR: could not establish any connections to the node localhost:9060 after 400 ms
RESET client_min_messages;
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26321/workflows/fd5f4622-400c-465e-8d82-83f5f55a87ec/jobs/745666
I addressed this with a combination of two things:
1. Only change citus.node_connection_timeout for the queries that we
want to test timeout behaviour for. When those queries are done I
reset the value to the default again.
2. Change our mitm framework to only delay the initial connection packet
instead of all packets. I think sometimes a follow on packet of a previous
connection attempt was causing the next connection attempt to be delayed
even if `conn.allow()` was already called. For our tests we only care about
connection timeouts, so there's no reason to delay any other packets than
the initial connection packet.
Then there was some last flakyness in the exact error that was given:
```diff
-- tests for connectivity checks
SELECT name FROM r1 WHERE id = 2;
WARNING: could not establish any connections to the node localhost:9060 after 900 ms
+WARNING: connection to the remote node localhost:9060 failed with the following error:
name
------
bar
(1 row)
```
Source: https://app.circleci.com/pipelines/github/citusdata/citus/26338/workflows/9610941c-4d01-4f62-84dc-b91abc56c252/jobs/746467
I don't have a good explaination for this slight change in error message, but
given that it is missing the actual error message I expected this to be related
to some small difference in timing: e.g. the server responding to the connection
attempt right after the coordinator determined that the connection timed out.
To solve this last flakyness I increased the connection timeouts and made the
difference between the timeout and the delay a bit bigger. With these tweaks
I wasn't able to reproduce this error on CI anymore.
Finally, I made most of the same changes to failure_failover_to_local_execution,
since it was using the `conn.delay()` mitm method too. The only change that
I left out was the timing increase, since it might not be strictly necessary and
increases time it takes to run the test. If this test ever becomes flaky the first
thing we should try is increase its timeout.
The failure_single_select test would sometimes fail with an error that's
similar to this:
```diff
-- cancel after first SELECT; txn should fail and nothing should be marked as invalid
SELECT citus.mitmproxy('conn.onQuery(query="^SELECT").cancel(' || pg_backend_pid() || ')');
- mitmproxy
----------------------------------------------------------------------
-
-(1 row)
-
+ERROR: canceling statement due to user request
+CONTEXT: COPY mitmproxy_result, line 1: ""
+SQL statement "COPY mitmproxy_result FROM '/home/circleci/project/src/test/regress/tmp_check/mitmproxy.fifo'"
+PL/pgSQL function citus.mitmproxy(text) line 11 at EXECUTE
BEGIN;
```
This error looked very to the one from #6217 and indeed the cause turned
out to be similar. Because we were canceling all SELECT queries, we
would actually sometimes cancel our mitmproxy SELECT queries itself.
This puts some additional restrictions on the queries that we cancel,
most importantly it should contain the name of the table that we're
selecting from.
I was able to reproduce the original issue locally pretty reliably. With
the changes in this PR it didn't happen again.
In passing this also changes one other failure test that was cancelling
all selects and puts similar additional restrictions on those
cancellations.
Example of failed test in CI: https://app.circleci.com/pipelines/github/citusdata/citus/26305/workflows/4d942b91-f83c-453c-8d9a-ae22d608e756/jobs/745071
The failure_create_distributed_table_non_empty test would sometimes fail
like this:
```diff
-- in the first test, cancel the first connection we sent from the coordinator
SELECT citus.mitmproxy('conn.cancel(' || pg_backend_pid() || ')');
- mitmproxy
----------------------------------------------------------------------
-
-(1 row)
-
+ERROR: canceling statement due to user request
+CONTEXT: COPY mitmproxy_result, line 1: ""
+SQL statement "COPY mitmproxy_result FROM '/home/circleci/project/src/test/regress/tmp_check/mitmproxy.fifo'"
+PL/pgSQL function citus.mitmproxy(text) line 11 at EXECUTE
SELECT create_distributed_table('test_table', 'id');
```
Because the cancel command had no filter it would actually sometimes
cancel the mitmproxy cancel command itself. This PR addresses that by
filtering on CREATE TABLE, which is one of the command that
create_distributed_table will send to the workers.
Example of failing test: https://app.circleci.com/pipelines/github/citusdata/citus/26252/workflows/1b7e5464-cca4-4ec1-99b3-48ddf25c29fa/jobs/742829
Sometimes in CI the columnar_memory test was using slightly more memory
than expected.
```diff
SELECT CASE WHEN 1.0 * TopMemoryContext / :top_post BETWEEN 0.98 AND 1.02 THEN 1 ELSE 1.0 * TopMemoryContext / :top_post END AS top_growth
FROM columnar_test_helpers.columnar_store_memory_stats();
--[ RECORD 1 ]-
-top_growth | 1
+-[ RECORD 1 ]------------------
+top_growth | 1.0206132116232119
-- before this change, max mem usage while executing inserts was 28MB and
```
This PR changes the expectation to be slightly higher, such that this
random increase in memory usage doesn't cause a flaky test.
Failing test: https://app.circleci.com/pipelines/github/citusdata/citus/26256/workflows/c0870f66-3346-4f8d-a1d3-36dfd7c98289/jobs/743028
In the logical_replication test we test that the cleanup logic at the
start of a shard move works as expected. To do so we create a
subscription and publication slot manually. This changes the test to
make that subscription actually connect to the database that the
publication is in.
Useful for #5987#6085
By running isolation tests in parallel we're just asking for flaky
tasks. The first test might temporarily block one of the commands in the
second test, which we then detect as waiting like this:
```diff
step s2-vacuum-analyze:
VACUUM ANALYZE test_insert_vacuum;
-
+ <waiting ...>
step s1-commit:
COMMIT;
+step s2-vacuum-analyze: <... completed>
```
Debugging flaky tests is also much harder when they are run in parallel.
This PR starts running all our isolation tests sequentially.
The reason for opening this PR was me seeing this failing test:
https://app.circleci.com/pipelines/github/citusdata/citus/26194/workflows/ff57e2cf-8ac4-40fe-bc0c-74a7f8fecb53/jobs/740454
As well as having fixed a similar issue recently in #6122
* Adjust some isolation test for the recent PG commits
In 3f32395612,
Postgres starts any isolation session with `set application_name`.
However, one of the tests we had expected that it is exactly the first
command in the session. The test tries to show that even if a gpid
has not been assigned, we can show it in the citus_lock_waits graph.
Now that, it is literally not possible to have such test as gpid
would be assigned after `set application_name` command. Still,
it is good to have a test where a command is blocked on the parser
Sometimes the columnar_memory test fails in CI with the following error:
```diff
SELECT 1.0 * TopMemoryContext / :top_post BETWEEN 0.98 AND 1.02 AS top_growth_ok
FROM columnar_test_helpers.columnar_store_memory_stats();
-[ RECORD 1 ]-+--
-top_growth_ok | t
+top_growth_ok | f
-- before this change, max mem usage while executing inserts was 28MB and
```
This is almost certainly a harmless failure that simply requires bumping
the margin a little bit. However, it's impossible to say with the
current output. I was unable to reproduce this on-demand on my local
machine or even in CI. So this changes the test to include the actual
value difference in the size of TopMemoryContext when it's outside the
expected range. Then next time it fails we at least have some
information about why.
Example of failing test: https://app.circleci.com/pipelines/github/citusdata/citus/25966/workflows/d472a57b-419a-4f33-b8bc-2e174a98d4d6/jobs/730576
As shown in #6196 the output of s1-view-locks is sometimes not as
expected. However, because it's output is very minimal it's hard to
understand the reason for that. This adds some more columns and
aggregates less, so we can more easily see what locks are unexpectedly
held or released.
In passing this also fixes the following flaky part of this test by excluding
locks taken by the maintenance daemon. After running it with this more
detailed output for s1-view-locks it became obvious that that was the
problem here.
```diff
diff -dU10 -w /home/jelte/work/citus/src/test/regress/expected/isolation_ref2ref_foreign_keys.out /home/jelte/work/citus/src/test/regress/results/isolation_ref2ref_foreign_keys.out
--- /home/jelte/work/citus/src/test/regress/expected/isolation_ref2ref_foreign_keys.out.modified 2022-08-18 15:42:08.689525233 +0200
+++ /home/jelte/work/citus/src/test/regress/results/isolation_ref2ref_foreign_keys.out.modified 2022-08-18 15:42:08.729525233 +0200
@@ -288,21 +288,22 @@
step s1-view-locks:
SELECT mode, count(*)
FROM pg_locks
WHERE locktype='advisory'
GROUP BY mode
ORDER BY 1, 2;
mode |count
------------------------+-----
-(0 rows)
+ShareUpdateExclusiveLock| 1
+(1 row)
starting permutation: s2-begin s2-insert-table-3 s1-view-locks s2-rollback s1-view-locks
step s2-begin:
BEGIN;
step s2-insert-table-3:
INSERT INTO ref_table_3 VALUES (7, 5);
step s1-view-locks:
```
In CI sometimes failure_setup will fail with the following error:
```diff
SELECT master_add_node('localhost', :worker_2_proxy_port); -- an mitmproxy which forwards to the second worker
- master_add_node
----------------------------------------------------------------------
- 2
-(1 row)
-
+ERROR: connection to the remote node localhost:9060 failed with the following error: could not connect to server: Connection refused
+ Is the server running on host "localhost" (127.0.0.1) and accepting
+ TCP/IP connections on port 9060?
+could not connect to server: Connection refused
+ Is the server running on host "localhost" (127.0.0.1) and accepting
+ TCP/IP connections on port 9060?
+could not connect to server: Cannot assign requested address
+ Is the server running on host "localhost" (::1) and accepting
+ TCP/IP connections on port 9060?
diff -dU10 -w /home/circleci/project/src/test/regress/expected/failure_online_move_shard_placement.out /home/circleci/project/src/test/regress/results/failure_online_move_shard_placement.out
```
This then breaks all the tests run after it as well, because we're
missing one worker node.
Locally I was able to reproduce this error by sleeping for 10 seconds in
the forked process sleep before actually starting mitmproxy. So I'm
expecting what's happening in CI is that due to limited resources,
mitmproxy is not up yet when we try to add its port as a workernode.
This PR fixes this by waiting until mitmproxy is listening on its socket
before actually starting to run our tests. This fixed it locally for me
when I made the forked process sleep for 10 seconds before starting
mitmproxy.
In passing it also improves the detection and errors that we already
had for the case where something was already listening on the
mitmproxy port.
Because both @gledis69 and me were changing things in our CI images
at the same time this also includes a bump of the style checker tools.
Closes#6200
This removes some warnings that are present when building on Ubuntu 22.04.
It removes warnings on PG13 + OpenSSL 3.0. OpenSSL 3.0 has marked some
functions that we use as deprecated, but we want to continue support OpenSSL
1.0.1 for the time being too. This indicates that to OpenSSL 3.0, so it doesn't
show warnings.
Sometimes this multi_utilities would fail with the following error:
```diff
SET citus.log_remote_commands TO ON;
-- should propagate to all workers because no table is specified
ANALYZE;
NOTICE: issuing BEGIN TRANSACTION ISOLATION LEVEL READ COMMITTED;SELECT assign_distributed_transaction_id(0, 3461, '2022-08-19 01:56:06.35816-07');
DETAIL: on server postgres@localhost:57637 connectionId: 1
NOTICE: issuing BEGIN TRANSACTION ISOLATION LEVEL READ COMMITTED;SELECT assign_distributed_transaction_id(0, 3461, '2022-08-19 01:56:06.35816-07');
DETAIL: on server postgres@localhost:57638 connectionId: 2
NOTICE: issuing SET citus.enable_ddl_propagation TO 'off'
DETAIL: on server postgres@localhost:57637 connectionId: 1
-NOTICE: issuing SET citus.enable_ddl_propagation TO 'off'
-DETAIL: on server postgres@localhost:xxxxx connectionId: xxxxxxx
NOTICE: issuing ANALYZE
DETAIL: on server postgres@localhost:57637 connectionId: 1
+NOTICE: issuing SET citus.enable_ddl_propagation TO 'off'
+DETAIL: on server postgres@localhost:57638 connectionId: 2
NOTICE: issuing ANALYZE
DETAIL: on server postgres@localhost:57638 connectionId: 2
```
This is simply a harmless change in output due to some timing
differences. This PR makes the test output consistent by only logging
the remote ANALYZE commands, not the SET commands.
This fixes our most commonly randomly failing failure test. The failing
diff is as follows:
```diff
SELECT citus.mitmproxy('conn.onQuery(query="fetch_intermediate_results").kill()');
mitmproxy
-----------
(1 row)
INSERT INTO target_table SELECT * FROM source_table;
-ERROR: connection to the remote node localhost:xxxxx failed with the following error: connection not open
+ERROR: could not open file "base/pgsql_job_cache/10_0_40/repartitioned_results_20770193413_from_4213590_to_1.data": No such file or directory
+CONTEXT: while executing command on localhost:9060
+while executing command on localhost:57637
SELECT * FROM target_table ORDER BY a;
```
As far as I can tell this is the cause of a race condition: After killing
fetch_intermediate_results on worker 9060, the previously created data
file gets cleaned up. The fetch_intermediate_results call that's sent
to worker 57637 will be cancelled and rolled back soon because of the
failure on the other connection. But if that fetch_intermediate_results
call is able to connect to 9060 before it is cancelled, it won't find
the file it's looking for there anymore. So while it's not the error we
expect, it does indicate that we succeeded.
To avoid this issue instead of killing the fetch_intermediate_results
call directly, we kill the COPY command that it uses to do the fetch.
This results in stable output as can be seen here, where 227 runs of
failure_insert_select_repartition succeeded:
https://app.circleci.com/pipelines/github/citusdata/citus/26168/workflows/9c64a3b6-f46c-4725-9fb4-8f6a2d00a023/jobs/739389
To be clear this changes the test to affects the opposite
fetch_intermediate_results call. This kills the fetch_intermediate_results
call of worker 57637, instead of killing the fetch_intermediate_results call
on worker 9060.
Example of failing test: https://app.circleci.com/pipelines/github/citusdata/citus/26147/workflows/780e95ea-264a-4c9f-ad2e-cf11449a795e/jobs/738467
We're in the processes of totally changing the shard rebalancer
experience and infrastructure. Soon the shard rebalancer will include
retries, crash recovery and support for running in the background.
These improvements come at a cost though, the way the
get_rebalance_progress UDF currently works is very hard to replicate
with this new structure. This is mostly because the old behaviour
doesn't really make sense anymore with this new infrastructure. A new
and better way to track the progress will be included as part of the new
infrastructure.
This PR is in preparation of the new code rebalancer experience.
It changes the get_rebalance_progress UDF to only display the moves that
are in progress at the moment, not the ones that happened in the past or
that are planned in the future. Another option would have been to
completely remove the current get_rebalance_progress functionality and
point people to the new way of tracking progress. But old blogposts
still reference the old UDF and users might have some automation on top
of it. Showing the progress of the current moves is fairly simple to
achieve, even with the new infrastructure.
So this PR is a kind of compromise: It doesn't have complete feature
parity with the old get_rebalance_progress, but the most common use
cases will still work.
There's also an advantage of the change: You can now see progress of
shard moves that were triggered by calling citus_move_shard_placement
manually. Instead of only being able to see progress of moves that were
initiated using get_rebalance_table_shards.
We used to rely on a seperate session to add the coordinator.
However, that might prevent the existing sessions to get
assigned proper gpids, which causes flaky tests.
This removes a flaky test that I introduced in #3868 after I fixed the
issue described in #3622. This test is sometimes fails randomly in CI.
The way it fails indicates that there might be some bug: A connection
breaks after rolling back to a savepoint.
I tried reproducing this issue locally, but I wasn't able to. I don't
understand what causes the failure.
Things that I tried were:
1. Running the test with:
```sql
SET citus.force_max_query_parallelization = true;
```
2. Running the test with:
```sql
SET citus.max_adaptive_executor_pool_size = 1;
```
3. Running the test in parallel with the same tests that it is run in
parallel with in multi_schedule.
None of these allowed me to reproduce the issue locally.
So I think it's time to give on fixing this test and simply remove the
test. The regression that this test protects against seems very unlikely
to reappear, since in #3868 I also added a big comment about the need
for the newly added `UnclaimConnection` call. So, I think the need for
the test is quite small, and removing it will make our CI less flaky.
In case the cause of the bug ever gets found, I tracked the bug in #6189
Example of a failing CI run:
https://app.circleci.com/pipelines/github/citusdata/citus/26098/workflows/f84741d9-13b1-4ae7-9155-c21ed3466951/jobs/736424
For reference the unexpected diff is this (so both warnings and an error):
```diff
INSERT INTO t SELECT i FROM generate_series(1, 100) i;
+WARNING: connection to the remote node localhost:57638 failed with the following error:
+WARNING:
+CONTEXT: while executing command on localhost:57638
+ERROR: connection to the remote node localhost:57638 failed with the following error:
ROLLBACK;
```
This test is also mentioned as the most failing regression test in #5975
There are 3 different ways that a sequence can be interacting
with tables. (1) and (2) are already supported. This commit adds
support for (3).
(1) column DEFAULT nextval('seq'):
The dependency is roughly like below,
and ExpandCitusSupportedTypes() is responsible
for finding the depending sequences.
schema <--- table <--- column <---- default value
^ |
|------------------ sequence <--------|
(2) serial columns: Bigserial/small serial etc:
The dependency is roughly like below,
and ExpandCitusSupportedTypes() is responsible
for finding the depending sequences.
schema <--- table <--- column <---- default value
^ |
| |
sequence <--------|
(3) Sequence OWNED BY table.column: Added support for
this type of resolution in this commit.
The dependency is almost like the following, and
ExpandCitusSupportedTypes() is NOT responsible for finding
the dependency.
schema <--- table <--- column
^
|
sequence
Object type ids have changed in PG15 because of at least two added
objects in the list: OBJECT_PARAMETER_ACL, OBJECT_PUBLICATION_NAMESPACE
To avoid different output between pg versions, let's use the object
name in the error, and put the object id in the error detail.
Relevant PG commits:
a0ffa885e478f5eeacc4e250e35ce25a4740c487
5a2832465fd8984d089e8c44c094e6900d987fcd
DESCRIPTION: Fix reference table lock contention
Dropping and creating reference tables unintentionally blocked on each other due to the use of an ExclusiveLock for both the Drop and conditionally copying existing reference tables to (new) nodes.
The patch does the following:
- Lower lock lever for dropping (reference) tables to `ShareLock` so they don't self conflict
- Treat reference tables and distributed tables equally and acquire the colocation lock when dropping any table that is in a colocation group
- Perform the precondition check for copying reference tables twice, first time with a lower lock that doesn't conflict with anything. Could have been a NoLock, however, in preparation for dropping a colocation group, it is an `AccessShareLock`
During normal operation the first check will always pass and we don't have to escalate that lock. Making it that we won't be blocked on adding and remove reference tables. Only after a node addition the first `create_reference_table` will still need to acquire an `ExclusiveLock` on the colocation group to perform the copy.
This is a refactoring PR that starts using our new hash table creation
helper function. It adds a few more macros for ease of use, because C
doesn't have default arguments. It also adds a macro to check if a
struct contains automatic padding bytes. No struct that is hashed using
tag_hash should have automatic padding bytes, because those bytes are
undefined and thus using them to create a hash will result in undefined
behaviour (usually a random hash).
**Intro**
This adds support to Citus to change the CPU priority values of
backends. This is created with two main usecases in mind:
1. Users might want to run the logical replication part of the shard moves
or shard splits at a higher speed than they would do by themselves.
This might cause some small loss of DB performance for their regular
queries, but this is often worth it. During high load it's very possible
that the logical replication WAL sender is not able to keep up with the
WAL that is generated. This is especially a big problem when the
machine is close to running out of disk when doing a rebalance.
2. Users might have certain long running queries that they don't impact
their regular workload too much.
**Be very careful!!!**
Using CPU priorities to control scheduling can be helpful in some cases
to control which processes are getting more CPU time than others.
However, due to an issue called "[priority inversion][1]" it's possible that
using CPU priorities together with the many locks that are used within
Postgres cause the exact opposite behavior of what you intended. This
is why this PR only allows the PG superuser to change the CPU priority
of its own processes. Currently it's not recommended to set `citus.cpu_priority`
directly. Currently the only recommended interface for users is the setting
called `citus.cpu_priority_for_logical_replication_senders`. This setting
controls CPU priority for a very limited set of processes (the logical
replication senders). So, the dangers of priority inversion are also limited
with when using it for this usecase.
**Background**
Before reading the rest it's important to understand some basic
background regarding process CPU priorities, because they are a bit
counter intuitive. A lower priority value, means that the process will
be scheduled more and whatever it's doing will thus complete faster. The
default priority for processes is 0. Valid values are from -20 to 19
inclusive. On Linux a larger difference between values of two processes
will result in a bigger difference in percentage of scheduling.
**Handling the usecases**
Usecase 1 can be achieved by setting `citus.cpu_priority_for_logical_replication_senders`
to the priority value that you want it to have. It's necessary to set
this both on the workers and the coordinator. Example:
```
citus.cpu_priority_for_logical_replication_senders = -10
```
Usecase 2 can with this PR be achieved by running the following as
superuser. Note that this is only possible as superuser currently
due to the dangers mentioned in the "Be very carefull!!!" section.
And although this is possible it's **NOT** recommended:
```sql
ALTER USER background_job_user SET citus.cpu_priority = 5;
```
**OS configuration**
To actually make these settings work well it's important to run Postgres
with more a more permissive value for the 'nice' resource limit than
Linux will do by default. By default Linux will not allow a process to
set its priority lower than it currently is, even if it was lower when
the process originally started. This capability is necessary to reset
the CPU priority to its original value after a transaction finishes.
Depending on how you run Postgres this needs to be done in one of two
ways:
If you use systemd to start Postgres all you have to do is add a line
like this to the systemd service file:
```conf
LimitNice=+0 # the + is important, otherwise its interpreted incorrectly as 20
```
If that's not the case you'll have to configure `/etc/security/limits.conf`
like so, assuming that you are running Postgres as the `postgres` OS user:
```
postgres soft nice 0
postgres hard nice 0
```
Finally you'd have add the following line to `/etc/pam.d/common-session`
```
session required pam_limits.so
```
These settings would allow to change the priority back after setting it
to a higher value.
However, to actually allow you to set priorities even lower than the
default priority value you would need to change the values in the
config to something lower than 0. So for example:
```conf
LimitNice=-10
```
or
```
postgres soft nice -10
postgres hard nice -10
```
If you use WSL2 you'll likely have to do another thing. You have to
open a new shell, because when PAM is only used during login, and
WSL2 doesn't actually log you in. You can force a login like this:
```
sudo su $USER --shell /bin/bash
```
Source: https://stackoverflow.com/a/68322992/2570866
[1]: https://en.wikipedia.org/wiki/Priority_inversion
The long description of the `citus.distributed_deadlock_detection_factor`
setting was incorrectly stating that 1000 would disable it. Instead -1
is the value that disables distributed deadlock detection.
When introducing non-blocking shard split functionality it was based
heavily on the non-blocking shard moves. However, differences between
usage was slightly to big to be able to reuse the existing functions
easily. So, most logical replication code was simply copied to dedicated
shard split functions and modified for that purpose.
This PR tries to create a more generic logical replication
infrastructure that can be used by both shard splits and shard moves.
There's probably more code sharing possible in the future, but I believe
this is at least a good start and addresses the lowest hanging fruit.
This also adds a CreateSimpleHash function that makes creating the
most common type of hashmap common.
This creates consistent test output for isolation tests that involve
`CREATE INDEX CONCURRENTLY`. `CREATE INDEX CONCURRENTLY` is sometimes
temporarily detected as blocking, even though it will complete without any other
queries needing to be run. This change makes sure that we wait until that happens
without running any other queries in the meantime. This way we always get consistent
output. The way we do that is addressed by using an empty step in the same
session as the `CREATE INDEX CONCURRENLTY` command. Doing so forces
the isolation tester to wait until the command is finished and not continue with
steps from other sessions. This is [the recommended approach by Postgres][1].
There's two separate cases which are addressed in slightly different ways:
1. If `CREATE INDEX CONCURRENTLY` is actually blocked on another session: Add an
empty step right after the commit of blocking session.
e.g. `"s2-ddl-create-index-concurrently" "s1-commit" "s2-empty"`
2. If it's not actually blocked on another session: Add [an asterisk marker][2] to make
it look like it's blocked (because sometimes this happens randomly) and right
after that we add an empty step to trigger waiting.
e.g. `"s2-ddl-create-index-concurrently"(*) "s2-empty" "s1-commit"`
In passing this also enables isolation tests that were disabled due to a
bug that has already been fixed for a while.
Fixes#5993
Related to #5910 and #2966
[1]: 5f0adec253/src/test/isolation/README (L197-L204)
[2]: 5f0adec253/src/test/isolation/README (L174-L179)
Co-authored-by: Hanefi Onaldi <Hanefi.Onaldi@microsoft.com>
ahmet gedemenli
Halil Ozan Akgül
Teja Mupparti
Onur Tirtir
Jelte Fennema
Emel Şimşek
Hanefi Onaldi
Ivan Kush
Naisila Puka
aykut-bozkurt
Gokhan Gulbiz
rajeshkt78
Marco Slot
aykutbozkurt
Marco Slot
Gledis Zeneli
Jelte Fennema
Önder Kalacı
Nils Dijk
Gürkan İndibay
dependabot[bot]
songjinzhou
Fabrízio de Royes Mello
Philip Dubé
Alexander Kukushkin
oohira
Ying Xu
Nitish Upreti
Sameer Awasekar
naisila
yxu2162