Calling ErrorIfUnsupportedConstraint was still giving errors on Semmle. This
makes sure that we check for NULL at runtime. This way we can safely ignore all
errors created by this function.
* Add third column to master_evaluation_modify table
It was already added in some tests, but now make it globally
applicable to the test file.
* Add third column to master_evaluation_select table
As we'll use the column in some tests
* Add modify regression tests
For the combinations of: local/remote, router/fast-path:
- Distribution key is a const.
- Contains a function
- A column which is not dist. key is parametrized
* Add select regression tests
For the combinations of: local/remote, router/fast-path:
- Distribution key is a const.
- Contains a function
- A column which is not dist. key is parametrized
* Make some tests consistent to check-base
As we don't have any other executors to run them.
These schedules were added when we had both the adaptive executor and
the real-time/router executors in the code. Since we only have adaptive
executor anymore, we can remove these.
Add failing tests, make changes to avoid crashes at least
Fix HAVING subquery pushdown ignoring reference table only subqueries,
also include HAVING in recursive planning
Given that we have a function IsDistributedTable which includes reference tables,
it seems best to have IsDistributedTableRTE & QueryContainsDistributedTableRTE
reflect that they do not include reference tables in their check
Similarly SublinkList's name should reflect that it only scans WHERE
contain_agg_clause asserts that we don't have SubLinks,
use contain_aggs_of_level as suggested by pg sourcecode
Before this commit, we considered !ContainsRecurringRTE() enough
for NotContainsOnlyRecurringTuples. However, instead, we can check
for existince of any distributed table.
DESCRIPTION: Fixes a bug that causes wrong results with complex outer joins
When ExecutorSlowStartInterval is set to 0, it has a special meaning
that we do not want to use slow start. Therefore, in the code we have
checks such as ExecutorSlowStartInterval > 0 to understand if it is
enabled or not. However, this is kind of subtle, and it creates an extra
mapping in our mind. Therefore, I thought that using a variable for the
special value removes the mapping and makes it easier to understand.
As @onderkalaci suggested removing the definition of GetWorkerNodeCount() that can potentially cause misunderstandings.
I can advise using ActiveReadableWorkerNodeCount() that returns the number of active primaries is a safer alternative than GetWorkerNodeCount() that returns the total number of workers containing inactives, primaries, and unavailable nodes. I introduced a bug #3556 and in the bugfix #3564 removed the single usage of said function
There are 2 problems with our early exit strategy that this commit fixes:
1- When we decide that a subplan results are sent to all worker nodes,
we used to skip traversing the whole distributed plan, instead of
skipping only the subplan.
2- We used to consider all available nodes in the cluster (secondaries
and inactive nodes as well as active primaries) when deciding on early
exit strategy. This resulted in failures to early exit when there are
secondaries or inactive nodes.
DESCRIPTION: satisfy static analysis tool for a nullptr dereference
During the static analysis project on the codebase this code has been flagged as having the potential for a null pointer dereference. Funnily enough the author had already made a comment of it in the code this was not possible due to us setting the schema name before we pass in the statement. If we want to reuse this code in a later setting this comment might not always apply and we could actually run into null pointer dereference.
This patch changes a bit of the code around to first of all make sure there is no NULL pointer dereference in this code anymore.
Secondly we allow for better deparsing by setting and adhering to the `if_not_exists` flag on the statement.
And finally add support for all syntax described in the documentation of postgres (FROM was missing).
Makees VacuumTaskList function even with other TaskList creator functions.
Also, previously we were generating per-shard vacuum command strings via
unconventional usage of StringInfo struct (setting the stringInfo->len field
manually) which could cause unexepected memory errors (that I cannot foresee now).
If the generated column does not come at the end of the column list,
columnNameList doesn't line up with the column indexes. Seek past
CREATE TABLE test_table (
test_id int PRIMARY KEY,
gen_n int GENERATED ALWAYS AS (1) STORED,
created_at TIMESTAMPTZ NOT NULL DEFAULT now()
);
SELECT create_distributed_table('test_table', 'test_id');
Would raise ERROR: cannot cast 23 to 1184
Without this commit you could still use varCell in the body of loop.
This makes it easy for bad refactors that still use the ListCell to slip
through unnoticed, because the new ListCell will be named the same as the
one used in the old code. By renaming the ListCell to varCellDoNotUse
this will not happen.
Semmle reported quite some places where we use a value that could be NULL. Most of these are not actually a real issue, but better to be on the safe side with these things and make the static analysis happy.
DESCRIPTION: Replace the query planner for the coordinator part with the postgres planner
Closes#2761
Citus had a simple rule based planner for the query executed on the query coordinator. This planner grew over time with the addigion of SQL support till it was getting close to the functionality of the postgres planner. Except the code was brittle and its complexity rose which made it hard to add new SQL support.
Given its resemblance with the postgres planner it was a long outstanding wish to replace our hand crafted planner with the well supported postgres planner. This patch replaces our planner with a call to postgres' planner.
Due to the functionality of the postgres planner we needed to support both projections and filters/quals on the citus custom scan node. When a sort operation is planned above the custom scan it might require fields to be reordered in the custom scan before returning the tuple (projection). The postgres planner assumes every custom scan node implements projections. Because we controlled the plan that was created we prevented reordering in the custom scan and never had implemented it before.
A same optimisation applies to having clauses that could have been where clauses. Instead of applying the filter as a having on the aggregate it will push it down into the plan which could reach a custom scan node.
For both filters and projections we have implemented them when tuples are read from the tuple store. If no projections or filters are required it will directly return the tuple from the tuple store. Otherwise it will loop tuples from the tuple store through the filter and projection until a tuple is found and returned.
Besides filters being pushed down a side effect of having quals that could have been a where clause is that a call to read intermediate result could be called before the first tuple is fetched from the custom scan. This failed because the intermediate result would only be pulled to the coordinator on the first tuple fetch. To overcome this problem we do run the distributed subplans now before we run the postgres executor. This ensures the intermediate result is present on the coordinator in time. We do account for total time instrumentation by removing the instrumentation before handing control to the psotgres executor and update the timings our self.
For future SQL support it is enough to create a valid query structure for the part of the query to be executed on the query coordinating node. As a utility we do serialise and print the query at debug level4 for engineers to inspect what kind of query is being planned on the query coordinator.
We don't actually use these functions anymore since merging #1477.
Advantages of removing:
1. They add work whenever we add a new node.
2. They contain some usage of stdlib APIs that are banned by Microsoft.
Removing it means we don't have to replace those with safe ones.
- Stop the daemon when citus extension is dropped
- Bail on maintenance daemon startup if myDbData is started with a non-zero pid
- Stop maintenance daemon from spawning itself
- Don't use postgres die, just wrap proc_exit(0)
- Assert(myDbData->workerPid == MyProcPid)
The two issues were that multiple daemons could be running for a database,
or that a daemon would be leftover after DROP EXTENSION citus
Comparison between differently sized integers in loop conditions can cause
infinite loops. This can happen when doing something like this:
```c
int64 very_big = MAX_INT32 + 1;
for (int32 i = 0; i < very_big; i++) {
// do something
}
// never reached because i overflows before it can reach the value of very_big
```
When using --allow-group-access option from initdb our keys and
certificates would be created with 0640 permissions. Which is a pretty
serious security issue: This changes that. This would not be exploitable
though, since postgres would not actually enable SSL and would output
the following message in the logs:
```
DETAIL: File must have permissions u=rw (0600) or less if owned by the database user, or permissions u=rw,g=r (0640) or less if owned by root.
```
Since citus still expected the cluster to have SSL enabled handshakes
between workers and coordinator would fail. So instead of a security
issue the cluster would simply be unusable.
Previously a limitation in the shard pruning logic caused multi distribution value queries to always go into all the shards/workers whenever query also used OR conditions in WHERE clause.
Related to https://github.com/citusdata/citus/issues/2593 and https://github.com/citusdata/citus/issues/1537
There was no good workaround for this limitation. The limitation caused quite a bit of overhead with simple queries being sent to all workers/shards (especially with setups having lot of workers/shards).
An example of a previous plan which was inadequately pruned:
```
EXPLAIN SELECT count(*) FROM orders_hash_partitioned
WHERE (o_orderkey IN (1,2)) AND (o_custkey = 11 OR o_custkey = 22);
QUERY PLAN
---------------------------------------------------------------------
Aggregate (cost=0.00..0.00 rows=0 width=0)
-> Custom Scan (Citus Adaptive) (cost=0.00..0.00 rows=0 width=0)
Task Count: 4
Tasks Shown: One of 4
-> Task
Node: host=localhost port=xxxxx dbname=regression
-> Aggregate (cost=13.68..13.69 rows=1 width=8)
-> Seq Scan on orders_hash_partitioned_630000 orders_hash_partitioned (cost=0.00..13.68 rows=1 width=0)
Filter: ((o_orderkey = ANY ('{1,2}'::integer[])) AND ((o_custkey = 11) OR (o_custkey = 22)))
(9 rows)
```
After this commit the task count is what one would expect from the query defining multiple distinct values for the distribution column:
```
EXPLAIN SELECT count(*) FROM orders_hash_partitioned
WHERE (o_orderkey IN (1,2)) AND (o_custkey = 11 OR o_custkey = 22);
QUERY PLAN
---------------------------------------------------------------------
Aggregate (cost=0.00..0.00 rows=0 width=0)
-> Custom Scan (Citus Adaptive) (cost=0.00..0.00 rows=0 width=0)
Task Count: 2
Tasks Shown: One of 2
-> Task
Node: host=localhost port=xxxxx dbname=regression
-> Aggregate (cost=13.68..13.69 rows=1 width=8)
-> Seq Scan on orders_hash_partitioned_630000 orders_hash_partitioned (cost=0.00..13.68 rows=1 width=0)
Filter: ((o_orderkey = ANY ('{1,2}'::integer[])) AND ((o_custkey = 11) OR (o_custkey = 22)))
(9 rows)
```
"Core" of the pruning logic works as previously where it uses `PrunableInstances` to queue ORable valid constraints for shard pruning.
The difference is that now we build a compact internal representation of the query expression tree with PruningTreeNodes before actual shard pruning is run.
Pruning tree nodes represent boolean operators and the associated constraints of it. This internal format allows us to have compact representation of the query WHERE clauses which allows "core" pruning logic to work with OR-clauses correctly.
For example query having
`WHERE (o_orderkey IN (1,2)) AND (o_custkey=11 OR (o_shippriority > 1 AND o_shippriority < 10))`
gets transformed into:
1. AND(o_orderkey IN (1,2), OR(X, AND(X, X)))
2. AND(o_orderkey IN (1,2), OR(X, X))
3. AND(o_orderkey IN (1,2), X)
Here X is any set of unknown condition(s) for shard pruning.
This allow the final shard pruning to correctly recognize that shard pruning is done with the valid condition of `o_orderkey IN (1,2)`.
Another example with unprunable condition in query
`WHERE (o_orderkey IN (1,2)) OR (o_custkey=11 AND o_custkey=22)`
gets transformed into:
1. OR(o_orderkey IN (1,2), AND(X, X))
2. OR(o_orderkey IN (1,2), X)
Which is recognized as unprunable due to the OR condition between distribution column and unknown constraint -> goes to all shards.
Issue https://github.com/citusdata/citus/issues/1537 originally suggested transforming the query conditions into a full disjunctive normal form (DNF),
but this process of transforming into DNF is quite a heavy operation. It may "blow up" into a really large DNF form with complex queries having non trivial `WHERE` clauses.
I think the logic for shard pruning could be simplified further but I decided to leave the "core" of the shard pruning untouched.
On worker 2 it was waiting for dustbunnies_990001 to be
vacuumed/analyzed. This table doesn't actually exist, so that never
happend. Now it waits for the correct table and throws an error if it
waits more than 10 seconds.
The root of the problem is that, standard_planner() converts the following qual
```
{OPEXPR
:opno 98
:opfuncid 67
:opresulttype 16
:opretset false
:opcollid 0
:inputcollid 100
:args (
{VAR
:varno 1
:varattno 1
:vartype 25
:vartypmod -1
:varcollid 100
:varlevelsup 0
:varnoold 1
:varoattno 1
:location 45
}
{CONST
:consttype 25
:consttypmod -1
:constcollid 100
:constlen -1
:constbyval false
:constisnull true
:location 51
:constvalue <>
}
)
:location 49
}
```
To
```
(
{CONST
:consttype 16
:consttypmod -1
:constcollid 0
:constlen 1
:constbyval true
:constisnull true
:location -1
:constvalue <>
}
)
```
So, Citus doesn't deal with NULL values in real-time or non-fast path router queries.
And, in the FastPathRouter planner, we check constisnull in DistKeyInSimpleOpExpression().
However, in deferred pruning case, we do not check for isnull for const.
Thus, the fix consists of two parts:
- Let PruneShards() not crash when NULL parameter is passed
- For deferred shard pruning in fast-path queries, explicitly check that we have CONST which is not NULL
Mark existing objects that are not included in distributed object infrastructure
in older versions of Citus (but now should be) as distributed, after updating
Citus successfully.
DESCRIPTION: Fix unnecessary repartition on joins with more than 4 tables
In 9.1 we have introduced support for all CH-benCHmark queries by widening our definitions of joins to include joins with expressions in them. This had the undesired side effect of Q5 regressing on its plan by implementing a repartition join.
It turned out this regression was not directly related to widening of the join clause, nor the schema employed by CH-benCHmark. Instead it had to do with 4 or more tables being joined in a chain. A chain meaning:
```sql
SELECT * FROM a,b,c,d WHERE a.part = b.part AND b.part = c.part AND ....
```
Due to how our join order planner was implemented it would only keep track of 1 of the partition columns when comparing if the join could be executed locally. This manifested in a join chain of 4 tables to _always_ be executed as a repartition join. 3 tables joined in a chain would have the middle table shared by the two outer tables causing the local join possibility to be found.
With this patch we keep a unique list (or set) of all partition columns participating in the join. When a candidate table is checked for a possibility to execute a local join it will check if there is any partition column in that set that matches an equality join clause on the partition column of the candidate table.
By taking into account all partition columns in the left relation it will now find the local join path on >= 4 tables joined in a chain.
fixes: #3276
For example, a PARAM might reside inside a function just because
of a casting of a type such as the follows:
```
{FUNCEXPR
:funcid 1740
:funcresulttype 1700
:funcretset false
:funcvariadic false
:funcformat 2
:funccollid 0
:inputcollid 0
:args (
{PARAM
:paramkind 0
:paramid 15
:paramtype 23
:paramtypmod -1
:paramcollid 0
:location 356
}
)
```
We should recursively check the expression before bailing out.
Sometimes during errors workers will create files while we're deleting intermediate directories
example:
DEBUG: could not remove file "base/pgsql_job_cache/10_0_431": Directory not empty
DETAIL: WARNING from localhost:57637
Previously we only prevented AVG from being pushed down, but this is incorrect:
- array_agg, while somewhat non sensical to order by, will potentially be missing values
- combinefunc aggregation will raise errors about cstrings not being comparable (while we also can't know if the aggregate is commutative)
This commit limits approximating LIMIT pushdown when ordering by aggregates to:
min, max, sum, count, bit_and, bit_or, every, any
Which means of those we previously supported, we now exclude:
avg, array_agg, jsonb_agg, jsonb_object_agg, json_agg, json_object_agg, hll_add, hll_union, topn_add, topn_union
Previously, the logic for evaluting the functions and the parameters
were the same. That ended-up evaluting the functions inaccurately
on the coordinator. Instead, split the function evaluation logic
from parameter evalution logic.
As that is powerful and cause metadata inconsistency. See the following steps:
(Note that we cannot use PGC_SUSET because on Citus MX we need this flag for non-
superusers as well)
```SQL
CREATE TABLE test_ref_table(key int);
SELECT create_reference_table('test_ref_table');
SELECT logicalrelid, logicalrelid::oid FROM pg_dist_partition;
┌────────────────┬──────────────┐
│ logicalrelid │ logicalrelid │
├────────────────┼──────────────┤
│ test_ref_table │ 16831 │
└────────────────┴──────────────┘
(1 row)
Time: 0.929 ms
SELECT relname FROM pg_class WHERE oid = 16831;
┌────────────────┐
│ relname │
├────────────────┤
│ test_ref_table │
└────────────────┘
(1 row)
Time: 0.785 ms
SET citus.enable_ddl_propagation TO off;
DROP TABLE test_ref_table ;
SELECT logicalrelid, logicalrelid::oid FROM pg_dist_partition;
┌──────────────┬──────────────┐
│ logicalrelid │ logicalrelid │
├──────────────┼──────────────┤
│ 16831 │ 16831 │
└──────────────┴──────────────┘
(1 row)
Time: 0.972 ms
SELECT relname FROM pg_class WHERE oid = 16831;
┌─────────┐
│ relname │
├─────────┤
└─────────┘
(0 rows)
Time: 0.908 ms
SELECT master_add_node('localhost', 9703);
server closed the connection unexpectedly
This probably means the server terminated abnormally
before or while processing the request.
The connection to the server was lost. Attempting reset: Failed.
Time: 5.028 ms
!>
```
Previously, we've identified the usedSubPlans by only looking
to the subPlanId.
With this commit, we're expanding it to also include information
on the location of the subPlan.
This is useful to distinguish the cases where the subPlan is used
either on only HAVING or both HAVING and any other part of the query.
First, diff is updated to not update the files in-place
For some reason diff is being called multiple times,
so $file1.unmodified becomes normalized on second invocation
Secondly, diff-filter updates output to come from the unmodified version
Normalization is serving two purposes:
- avoid diff noise in regressions
- avoid diff noise in commits when expected result is updated
The first purpose only wants to reduce the lines which diff registers,
whereas the second wants those changes to be committed
* Update shardPlacement->nodeId to uint
As the source of the shardPlacement->nodeId is always workerNode->nodeId,
and that is uint32.
We had this hack because of: 0ea4e52df5 (r266421409)
And, that is gone with: 90056f7d3c (diff-c532177d74c72d3f0e7cd10e448ab3c6L1123)
So, we're safe to do it now.
* Relax the restrictions on using the local execution
Previously, whenever any local execution happens, we disabled further
commands to do any remote queries. The basic motivation for doing that
is to prevent any accesses in the same transaction block to access the
same placements over multiple sessions: one is local session the other
is remote session to the same placement.
However, the current implementation does not distinguish local accesses
being to a placement or not. For example, we could have local accesses
that only touches intermediate results. In that case, we should not
implement the same restrictions as they become useless.
So, this is a pre-requisite for executing the intermediate result only
queries locally.
* Update the error messages
As the underlying implementation has changed, reflect it in the error
messages.
* Keep track of connections to local node
With this commit, we're adding infrastructure to track if any connection
to the same local host is done or not.
The main motivation for doing this is that we've previously were more
conservative about not choosing local execution. Simply, we disallowed
local execution if any connection to any remote node is done. However,
if we want to use local execution for intermediate result only queries,
this'd be annoying because we expect all queries to touch remote node
before the final query.
Note that this approach is still limiting in Citus MX case, but for now
we can ignore that.
* Formalize the concept of Local Node
Also some minor refactoring while creating the dummy placement
* Write intermediate results locally when the results are only needed locally
Before this commit, Citus used to always broadcast all the intermediate
results to remote nodes. However, it is possible to skip pushing
the results to remote nodes always.
There are two notable cases for doing that:
(a) When the query consists of only intermediate results
(b) When the query is a zero shard query
In both of the above cases, we don't need to access any data on the shards. So,
it is a valuable optimization to skip pushing the results to remote nodes.
The pattern mentioned in (a) is actually a common patterns that Citus users
use in practice. For example, if you have the following query:
WITH cte_1 AS (...), cte_2 AS (....), ... cte_n (...)
SELECT ... FROM cte_1 JOIN cte_2 .... JOIN cte_n ...;
The final query could be operating only on intermediate results. With this patch,
the intermediate results of the ctes are not unnecessarily pushed to remote
nodes.
* Add specific regression tests
As there are edge cases in Citus MX and with round-robin policy,
use the same queries on those cases as well.
* Fix failure tests
By forcing not to use local execution for intermediate results since
all the tests expects the results to be pushed remotely.
* Fix flaky test
* Apply code-review feedback
Mostly style changes
* Limit the max value of pg_dist_node_seq to reserve for internal use
This can helpful in guiding us where to look when this test fails.
For example, if the result file has repartitioned_results_ prefix,
then we need to look into repartitioned insert/select. Otherwise
it is probably a CTE or a subquery.
In #3374 a new way of locking shard distribution metadata was
implemented. However, this was only done in the function
`LockShardDistributionMetadata` and not in
`TryLockShardDistributionMetadata`. This is bad, since it causes these
locks to not block eachother in some cases.
This commit fixes this issue by sharing the code that sets the locktag
between the two function.
When creating a new distributed table. The shards would colocate with shards
with SHARD_STATE_TO_DELETE (shardstate = 4). This means if that state was
because of a shard move the new shard would be created on two nodes and it
would not get deleted since it's shard state would be 1.
adaptive_executor: sort includes, use foreach_ptr, remove lies from FinishDistributedExecution docs
connection_management: rename msecs, which isn't milliseconds
placement_connection: small typos
Comment from code:
/*
* We had to implement this hack because on Postgres11 and below, the originalQuery
* and the query would have significant differences in terms of CTEs where CTEs
* would not be inlined on the query (as standard_planner() wouldn't inline CTEs
* on PG 11 and below).
*
* Instead, we prefer to pass the inlined query to the distributed planning. We rely
* on the fact that the query includes subqueries, and it'd definitely go through
* query pushdown planning. During query pushdown planning, the only relevant query
* tree is the original query.
*/
Deparsing and parsing a query can be heavy on CPU. When locally executing
the query we don't need to do this in theory most of the time.
This PR is the first step in allowing to skip deparsing and parsing
the query in these cases, by lazily creating the query string and
storing the query in the task. Future commits will make use of this and
not deparse and parse the query anymore, but use the one from the task
directly.
This is purely to enable better performance with prepared statements.
Before this commit, the fast path queries with prepared statements
where the distribution key includes a parameter always went through
distributed planning. After this change, we only go through distributed
planning on the first 5 executions.
DESCRIPTION: Fixes a problem when adding a new node due to tables referenced in a functions body
Fixes#3378
It was reported that `master_add_node` would fail if a distributed function has a table name referenced in its declare section of the body. By default postgres validates the body of a function on creation. This is not a problem in the normal case as tables are replicated to the workers when we distribute functions.
However when a new node is added we first create dependencies on the workers before we try to create any tables, and the original tables get created out of bound when the metadata gets synced to the new node. This causes the function body validator to raise an error the table is not on the worker.
To mitigate this issue we set `check_function_bodies` to `off` right before we are creating the function.
The added test shows this does resolve the issue. (issue can be reproduced on the commit without the fix)
In this commit, we're introducing a way to prevent CTE inlining via a GUC.
The GUC is used in all the tests where PG 11 and PG 12 tests would diverge
otherwise.
Note that, in PG 12, the restriction information for CTEs are generated. It
means that for some queries involving CTEs, Citus planner (router planner/
pushdown planner) may behave differently. So, via the GUC, we prevent
tests to diverge on PG 11 vs PG 12.
When we drop PG 11 support, we should get rid of the GUC, and mark
relevant ctes as MATERIALIZED, which does the same thing.
These set of tests has changed in both PG 11 and PG 12.
The changes are only about CTE inlining kicking in both
versions, and yielding the exact same distributed planning.
With this commit, we're adding the specific tests for CTE inlining.
The test has a different output file for pg 11, because as mentioned
in the previous commits, PG 12 generates more restriction information
for CTEs.
The idea is simple: Inline CTEs(if any), try distributed planning.
If the planning yields a successful distributed plan, simply return
it.
If the planning fails, fallback to distributed planning on the query
tree where CTEs are not inlined. In that case, if the planning failed
just because of the CTE inlining, via recursive planning, the same
query would yield a successful plan.
A very basic set of examples:
WITH cte_1 AS (SELECT * FROM test_table)
SELECT
*, row_number() OVER ()
FROM
cte_1;
or
WITH a AS (SELECT * FROM test_table),
b AS (SELECT * FROM test_table)
SELECT * FROM a JOIN b ON (a.value> b.value);
With this commit we add the necessary Citus function to inline CTEs
in a queryTree.
You might ask, why do we need to inline CTEs if Postgres is already
going to do it?
Few reasons behind this decision:
- One techinal node here is that Citus does the recursive CTE planning
by checking the originalQuery which is the query that has not gone
through the standard_planner().
CTEs in Citus is super powerful. It is practically key for full SQL
coverage for multi-shard queries. With CTEs, you can always reduce
any query multi-shard query into a router query via recursive
planning (thus full SQL coverage).
We cannot let CTE inlining break that. The main idea is Citus should
be able to retry planning if anything goes after CTE inlining.
So, by taking ownership of CTE inlining on the originalQuery, Citus
can fallback to recursive planning of CTEs if the planning with the
inlined query fails. It could have been a lot harder if we had relied
on standard_planner() to have the inlined CTEs on the original query.
- We want to have this feature in PostgreSQL 11 as well, but Postgres
only inlines in version 12
All the code in this commit is direct copy & paste from Postgres
source code.
We can classify the copy&paste code into two:
- Copy paste from CTE inline patch from postgres
(https://git.postgresql.org/gitweb/?p=postgresql.git;a=commitdiff;h=608b167f9f9c4553c35bb1ec0eab9ddae643989b)
These include the functions inline_cte(), inline_cte_walker(),
contain_dml(), contain_dml_walker().
It also include the code in function PostgreSQLCTEInlineCondition().
We prefer to extract that code into a seperate function, because
(a) we'll re-use the logic later (b) we added one check for PG_11
Finally, the struct "inline_cte_walker_context" is also copied from
the same Postgres commit.
- Copy paste from the other parts of the Postgres code
In order to implement CTE inlining in Postgres 12, the hackers
modified the query_tree_walker()/range_table_walker() with the
18c0da88a5
Since Citus needs to support the same logic in PG 11, we copy & pasted
that functions (and related flags) with the names pg_12_query_tree_walker()
and pg_12_range_table_walker()
In two places I've made code more straight forward by using ROUTINE in our own codegen
Two changes which may seem extraneous:
AppendFunctionName was updated to not use pg_get_function_identity_arguments.
This is because that function includes ORDER BY when printing an aggregate like my_rank.
While ALTER AGGREGATE my_rank(x "any" ORDER BY y "any") is accepted by postgres,
ALTER ROUTINE my_rank(x "any" ORDER BY y "any") is not.
Tests were updated to use macaddr over integer. Using integer is flaky, our logic
could sometimes end up on tables like users_table. I originally wanted to use money,
but money isn't hashable.
We might need to send commands from workers to other workers. In
these cases we shouldn't override the xact id assigned by coordinator,
or otherwise we won't read the consistent set of result files
accross the nodes.
We need to know which placement succeeded in executing the worker_partition_query_result() call. Otherwise we wouldn't know which node to fetch from. This change allows that by introducing Task::perPlacementQueryStrings.
Fixes#3331
In #2389, we've implemented support for partitioned tables with rep > 1.
The implementation is limiting the use of modification queries on the
partitions. In fact, we error out when any partition is modified via
EnsurePartitionTableNotReplicated().
However, we seem to forgot an important case, where the parent table's
partition is marked as INVALID. In that case, at least one of the partition
becomes INVALID. However, we do not mark partitions as INVALID ever.
If the user queries the partition table directly, Citus could happily send
the query to INVALID placements -- which are not marked as INVALID.
This PR fixes it by marking the placements of the partitions as INVALID
as well.
The shard placement repair logic already re-creates all the partitions,
so should be fine in that front.
Different versions of reindent tool reformatted citus_custom_scan.c
and citus_copyfuncs.c differently. So some developers spent some
extra attention not to commit these two files after reindent.
This PR tries to address this.
* WIP
* wip
* add basic logic to run a single job with repartioning joins with adaptive executor
* fix some warnings and return in ExecuteDependedTasks if there is none
* Add the logic to run depended jobs in adaptive executor
The execution of depended tasks logic is changed. With the current
logic:
- All tasks are created from the top level task list.
- At one iteration:
- CurTasks whose dependencies are executed are found.
- CurTasks are executed in parallel with adapter executor main
logic.
- The iteration is repeated until all tasks are completed.
* Separate adaptive executor repartioning logic
* Remove duplicate parts
* cleanup directories and schemas
* add basic repartion tests for adaptive executor
* Use the first placement to fetch data
In task tracker, when there are replicas, we try to fetch from a replica
for which a map task is succeeded. TaskExecution is used for this,
however TaskExecution is not used in adaptive executor. So we cannot use
the same thing as task tracker.
Since adaptive executor fails when a map task fails (There is no retry
logic yet). We know that if we try to execute a fetch task, all of its
map tasks already succeeded, so we can just use the first one to fetch
from.
* fix clean directories logic
* do not change the search path while creating a udf
* Enable repartition joins with adaptive executor with only enable_reparitition_joins guc
* Add comments to adaptive_executor_repartition
* dont run adaptive executor repartition test in paralle with other tests
* execute cleanup only in the top level execution
* do cleanup only in the top level ezecution
* not begin a transaction if repartition query is used
* use new connections for repartititon specific queries
New connections are opened to send repartition specific queries. The
opened connections will be closed at the FinishDistributedExecution.
While sending repartition queries no transaction is begun so that
we can see all changes.
* error if a modification was done prior to repartition execution
* not start a transaction if a repartition query and sql task, and clean temporary files and schemas at each subplan level
* fix cleanup logic
* update tests
* add missing function comments
* add test for transaction with DDL before repartition query
* do not close repartition connections in adaptive executor
* rollback instead of commit in repartition join test
* use close connection instead of shutdown connection
* remove unnecesary connection list, ensure schema owner before removing directory
* rename ExecuteTaskListRepartition
* put fetch query string in planner not executor as we currently support only replication factor = 1 with adaptive executor and repartition query and we know the query string in the planner phase in that case
* split adaptive executor repartition to DAG execution logic and repartition logic
* apply review items
* apply review items
* use an enum for remote transaction state and fix cleanup for repartition
* add outside transaction flag to find connections that are unclaimed instead of always opening a new transaction
* fix style
* wip
* rename removejobdir to partition cleanup
* do not close connections at the end of repartition queries
* do repartition cleanup in pg catch
* apply review items
* decide whether to use transaction or not at execution creation
* rename isOutsideTransaction and add missing comment
* not error in pg catch while doing cleanup
* use replication factor of the creation time, not current time to decide if task tracker should be chosen
* apply review items
* apply review items
* apply review item
DESCRIPTION: Fix counter that keeps track of internal depth in executor
While reviewing #3302 I ran into the `ExecutorLevel` variable which used a variable to keep the original value to restore on successful exit. I haven't explored the full space and if it is possible to get into an inconsistent state. However using `PG_TRY`/`PG_CATCH` seems generally more correct.
Given very bad things will happen if this level is not reset, I kept the failsafe of setting the variiable back to 0 on the `XactCallback` but I did add an assert to treat it as a developer bug.
Currently in mx isolation tests the setup is the same except the creation of tables. Isolation framework lets us define multiple `setup` stages, therefore I thought that we can put the `mx_setup` to one file and prepend this prior to running tests.
How the structure works:
- cpp is used before running isolation tests to preprocess spec files. This way we can include any file we want to. Currently this is used to include mx common part.
- spec files are put to `/build/specs` for clear separation between generated files and template files
- a symbolic link is created for `/expected` in `build/expected/`.
- when running isolation tests, as the `inputdir`, `build` is passed so it runs the spec files from `build/specs` and checks the expected output from `build/expected`.
`/specs` is renamed as `/spec` because postgres first look at the `specs` file under current directory, so this is renamed to avoid that since we are running the isolation tests from `build/specs` now.
Note: now we use `//` instead of `#` in comments in spec files, because cpp interprets `#` as a directive and it ignores `//`.
Postgres keeps track of recursive CTEs in the queryTree in two ways:
- queryTree->hasRecursive is set to true, whenever a RECURSIVE CTE
is used in the SQL. Citus checks for it
- If the CTE is actually a recursive one (a.k.a., references itself)
Postgres marks CommonTableExpr->cterecursive as true as well
The tests that are changed in the PR doesn't cover (b), and this becomes
an issue with CTE inlining (#3161). In that case, Citus/Postgres can inline
such CTEs, and the queries works with Citus.
However, this tests intend to check if there is any recursive CTE in the queryTree.
So, we're actually making the CTEs recursive CTEs by referring itself.
We'll add cases where a recursive CTE works by inlining in #3161.
Use partition column's collation for range distributed tables
Don't allow non deterministic collations for hash distributed tables
CoPartitionedTables: don't compare unequal types
Jelte Fennema
Philip Dubé
Önder Kalacı
Onder Kalaci
Onur Tirtir
Marco Slot
SaitTalhaNisanci
Hanefi Onaldi
Hanefi Onaldi
Nils Dijk
Philip Dubé
Hadi Moshayedi
Markus Sintonen
Halil Ozan Akgul