* Use CalculateUniformHashRangeIndex in HashPartitionId
INT32_MIN definition can change among different platforms hence it is
possible to get overflow, we would see crashes because of this in debian
distros. We have already solved a similar problem with introducing
CalculateUniformHashRangeIndex method, hence to solve it we can use the
same method, this also removes some duplication and has a single place
to decide that.
* Use PG_INT32_XX instead of INT32_XX to be safer
* use adaptive executor even if task-tracker is set
* Update check-multi-mx tests for adaptive executor
Basically repartition joins are enabled where necessary. For parallel
tests max adaptive executor pool size is decresed to 2, otherwise we
would get too many clients error.
* Update limit_intermediate_size test
It seems that when we use adaptive executor instead of task tracker, we
exceed the intermediate result size less in the test. Therefore updated
the tests accordingly.
* Update multi_router_planner
It seems that there is one problem with multi_router_planner when we use
adaptive executor, we should fix the following error:
+ERROR: relation "authors_range_840010" does not exist
+CONTEXT: while executing command on localhost:57637
* update repartition join tests for check-multi
* update isolation tests for repartitioning
* Error out if shard_replication_factor > 1 with repartitioning
As we are removing the task tracker, we cannot switch to it if
shard_replication_factor > 1. In that case, we simply error out.
* Remove MULTI_EXECUTOR_TASK_TRACKER
* Remove multi_task_tracker_executor
Some utility methods are moved to task_execution_utils.c.
* Remove task tracker protocol methods
* Remove task_tracker.c methods
* remove unused methods from multi_server_executor
* fix style
* remove task tracker specific tests from worker_schedule
* comment out task tracker udf calls in tests
We were using task tracker udfs to test permissions in
multi_multiuser.sql. We should find some other way to test them, then we
should remove the commented out task tracker calls.
* remove task tracker test from follower schedule
* remove task tracker tests from multi mx schedule
* Remove task-tracker specific functions from worker functions
* remove multi task tracker extra schedule
* Remove unused methods from multi physical planner
* remove task_executor_type related things in tests
* remove LoadTuplesIntoTupleStore
* Do initial cleanup for repartition leftovers
During startup, task tracker would call TrackerCleanupJobDirectories and
TrackerCleanupJobSchemas to clean up leftover directories and job
schemas. With adaptive executor, while doing repartitions it is possible
to leak these things as well. We don't retry cleanups, so it is possible
to have leftover in case of errors.
TrackerCleanupJobDirectories is renamed as
RepartitionCleanupJobDirectories since it is repartition specific now,
however TrackerCleanupJobSchemas cannot be used currently because it is
task tracker specific. The thing is that this function is a no-op
currently.
We should add cleaning up intermediate schemas to DoInitialCleanup
method when that problem is solved(We might want to solve it in this PR
as well)
* Revert "remove task tracker tests from multi mx schedule"
This reverts commit 03ecc0a681.
* update multi mx repartition parallel tests
* not error with task_tracker_conninfo_cache_invalidate
* not run 4 repartition queries in parallel
It seems that when we run 4 repartition queries in parallel we get too
many clients error on CI even though we don't get it locally. Our guess
is that, it is because we open/close many connections without doing some
work and postgres has some delay to close the connections. Hence even
though connections are removed from the pg_stat_activity, they might
still not be closed. If the above assumption is correct, it is unlikely
for it to happen in practice because:
- There is some network latency in clusters, so this leaves some times
for connections to be able to close
- Repartition joins return some data and that also leaves some time for
connections to be fully closed.
As we don't get this error in our local, we currently assume that it is
not a bug. Ideally this wouldn't happen when we get rid of the
task-tracker repartition methods because they don't do any pruning and
might be opening more connections than necessary.
If this still gives us "too many clients" error, we can try to increase
the max_connections in our test suite(which is 100 by default).
Also there are different places where this error is given in postgres,
but adding some backtrace it seems that we get this from
ProcessStartupPacket. The backtraces can be found in this link:
https://circleci.com/gh/citusdata/citus/138702
* Set distributePlan->relationIdList when it is needed
It seems that we were setting the distributedPlan->relationIdList after
JobExecutorType is called, which would choose task-tracker if
replication factor > 1 and there is a repartition query. However, it
uses relationIdList to decide if the query has a repartition query, and
since it was not set yet, it would always think it is not a repartition
query and would choose adaptive executor when it should choose
task-tracker.
* use adaptive executor even with shard_replication_factor > 1
It seems that we were already using adaptive executor when
replication_factor > 1. So this commit removes the check.
* remove multi_resowner.c and deprecate some settings
* remove TaskExecution related leftovers
* change deprecated API error message
* not recursively plan single relatition repartition subquery
* recursively plan single relation repartition subquery
* test depreceated task tracker functions
* fix overlapping shard intervals in range-distributed test
* fix error message for citus_metadata_container
* drop task-tracker deprecated functions
* put the implemantation back to worker_cleanup_job_schema_cachesince citus cloud uses it
* drop some functions, add downgrade script
Some deprecated functions are dropped.
Downgrade script is added.
Some gucs are deprecated.
A new guc for repartition joins bucket size is added.
* order by a test to fix flappiness
ActiveReadableWorkerNodeList doesn't include coordinator, however if
coordinator is added as a worker, we should also include that while
planning. The current methods are very easily misusable and this
requires a refactoring to make the distinction between methods that
include coordinator and that don't very explicit as they can introduce
subtle/major bugs pretty easily.
Static analysis found some issues where we used the result from
ExtractResultRelationRTE, without checking that it wasn't NULL. It seems
like in all these cases it can never actually be NULL, since we have checked
before that it isn't a SELECT query. So, this PR is mostly to make static
analysis happy (and protect a bit against future changes of the code).
Static analysis found an issue where we could dereference `NULL`, because
`CreateDummyPlacement` could return `NULL` when there were no workers. This
PR changes it so that it never returns `NULL`, which was intended by
@marcocitus when doing this change: https://github.com/citusdata/citus/pull/3887/files#r438136433
While adding tests for citus on a single node I also added some more basic
tests and it turns out we error out on repartition joins. This has been
present since `shouldhaveshards` was introduced and is not trivial to fix.
So I created a separate issue for this: https://github.com/citusdata/citus/issues/3996
This is so we don't need to calculate it twice in
insert_select_executor.c and multi_explain.c, which can
cause discrepancy if an update in one of them is not
reflected in the other site.
In #3901 the "Data received from worker(s)" sections were added to EXPLAIN
ANALYZE. After merging @pykello posted some review comments. This addresses
those comments as well as fixing a other issues that I found while addressing
them. The things this does:
1. Fix `EXPLAIN ANALYZE EXECUTE p1` to not increase received data on every
execution
2. Fix `EXPLAIN ANALYZE EXECUTE p1(1)` to not return 0 bytes as received data
allways.
3. Move `EXPLAIN ANALYZE` specific logic to `multi_explain.c` from
`adaptive_executor.c`
4. Change naming of new explain sections to `Tuple data received from node(s)`.
Firstly because a task can reference the coordinator too, so "worker(s)" was
incorrect. Secondly to indicate that this is tuple data and not all network
traffic that was performed.
5. Rename `totalReceivedData` in our codebase to `totalReceivedTupleData` to
make it clearer that it's a tuple data counter, not all network traffic.
6. Actually add `binary_protocol` test to `multi_schedule` (woops)
7. Fix a randomly failing test in `local_shard_execution.sql`.
Sadly this does not actually work yet for binary protocol data, because
when doing EXPLAIN ANALYZE we send two commands at the same time. This
means we cannot use `SendRemoteCommandParams`, and thus cannot use the
binary protocol. This can still be useful though when using the text
protocol, to find out that a lot of data is being sent.
* Insert select with master query
* Use relid to set custom_scan_tlist varno
* Reviews
* Fixes null check
Co-authored-by: Marco Slot <marco.slot@gmail.com>
DESCRIPTION: Adds support to partially push down tdigest aggregates
tdigest extensions: https://github.com/tvondra/tdigest
This PR implements the partial pushdown of tdigest calculations when possible. The extension adds a tdigest type which can be combined into the same structure. There are several aggregate functions that can be used to get;
- a quantile
- a list of quantiles
- the quantile of a hypothetical value
- a list of quantiles for a list of hypothetical values
These function can work both on values or tdigest types.
Since we can create tdigest values either by combining them, or based on a group of values we can rewrite the aggregates in such a way that most of the computation gets delegated to the compute on the shards. This both speeds up the percentile calculations because the values don't have to be sorted while at the same time making the transfer size from the shards to the coordinator significantly less.
We still recursively plan some cases, eg:
- INSERTs
- SELECT FOR UPDATE when reference tables in query
- Everything must be same single shard & replication model
We wrap worker tasks in worker_save_query_explain_analyze() so we can fetch
their explain output later by a call worker_last_saved_explain_analyze().
Fixes#3519Fixes#2347Fixes#2613Fixes#621
This code is not needed anymore since #3668 was merged.
It's actually causing some issues when using the binary Postgres
protocol, because postgres thinks it gets a `bigint` from
the worker, but actually gets an normal `int`.
The query in question that fails is this:
```sql
CREATE TABLE test_table_1(id int, val1 int);
CREATE TABLE test_table_2(id int, val1 bigint);
SELECT create_distributed_table('test_table_1', 'id');
SELECT create_distributed_table('test_table_2', 'id');
INSERT INTO test_table_1 VALUES(1,1),(2,2),(3,3);
INSERT INTO test_table_2 VALUES(1,1),(3,3),(4,5);
SELECT val1
FROM test_table_1 LEFT JOIN test_table_2 USING(id, val1)
ORDER BY 1;
```
The difference in queries that is sent to the workers after this change is this, for this query:
```diff
--- query_old.sql 2020-06-09 09:51:21.460000000 +0200
+++ query_new.sql 2020-06-09 09:51:39.500000000 +0200
@@ -1 +1 @@
-SELECT worker_column_1 AS val1 FROM (SELECT test_table_1.val1 AS worker_column_1 FROM (public.test_table_1_102015 test_table_1(id, val1) LEFT JOIN public.test_table_2_102019 test_table_2(id, val1) USING (id, val1))) worker_subquery
+SELECT worker_column_1 AS val1 FROM (SELECT val1 AS worker_column_1 FROM (public.test_table_1_102015 test_table_1(id, val1) LEFT JOIN public.test_table_2_102019 test_table_2(id, val1) USING (id, val1))) worker_subquery
```
Implements worker_save_query_explain_analyze and worker_last_saved_explain_analyze.
worker_save_query_explain_analyze executes and returns results of query while
saving its EXPLAIN ANALYZE to be fetched later.
worker_last_saved_explain_analyze returns the saved EXPLAIN ANALYZE result.
If we want to get necessary lockmode for a relation RangeVar within
a query, we can get the lockmode easily from the RangeVar itself (if
pg version >= 12).
However, if we want to decide the lockmode appropriate for the
"query", we can derive this information by using GetQueryLockMode
according to the code comment from RangeTblEntry->rellockmode.
Implements a new `TupleDestination` interface to allow custom tuple processing per task.
This can be specially useful if a task contains multiple queries. An example of this EXPLAIN
ANALYZE, where it needs to add some UDF calls to the query to fetch the explain output
from worker after fetching the actual query results.
SELECT_TASK is renamed to READ_TASK as a SELECT with modifying CTEs will be a MODIFYING_TASK
RouterInsertJob: Assert originalQuery->commandType == CMD_INSERT
CreateModifyPlan: Assert originalQuery->commandType != CMD_SELECT
Remove unused function IsModifyDistributedPlan
DistributedExecution, ExecutionParams, DistributedPlan: Rename hasReturning to expectResults
SELECTs set expectResults to true
Rename CreateSingleTaskRouterPlan to CreateSingleTaskRouterSelectPlan
DESCRIPTION: Ignore pruned target list entries in coordinator plan
The postgres planner has the ability to prune target list entries that are proven not used in the output relation. When this happens at the `CitusCustomScan` boundary we need to _not_ return these pruned columns to not upset the rest of the planner.
By using the target list the planner asks us to return we fix issues that lead to Assertion failures, and potentially could be runtime errors when they hit in a production build.
Fixes#3809
In the code, we had the assumption that if restriction information
is NULL, it means that we cannot have any disributetd tables in
the subquery.
However, for subqueries in WHERE clause, that is not the case when
the subquery is ANDed with FALSE. In that case, Citus operates
on the originalQuery (which doesn't go through the standard_planner()),
and rely on the restriction information generated by standard_plannner().
As Postgres is smart enough to no generate restriction information for
subqueries ANDed with FALSE, we hit the assertion.
Physical planner doesn't support parameters. If the parameters have already
been resolved when the physical planner handling the queries, mark it.
The reason is that the executor is unaware of this, and sends the parameters
along with the worker queries, which fails for composite types.
(See `DissuadePlannerFromUsingPlan()` for the details of paramater resolving)
This copies over fixes from reference counting branch,
all CitusTableCacheEntry data may be freed when a GetCitusTableCacheEntry call occurs for its relationId
This fix is not complete, but reference counting is being deferred until 9.4
CopyShardInterval: remove dest parameter, always return newly allocated object
When we call SetTaskQueryString we would set the task type to
TASK_QUERY_TEXT, and some parts of the codebase rely on the fact that if
TASK_QUERY_TEXT is set, the data can be read safely. However if
SetTaskQueryString is called with a NULL taskQueryString this can cause
crashes. In that case taskQueryType will simply be set to
TASK_QUERY_NULL.
We have two variables that are related to local execution status.
TransactionAccessedLocalPlacement and
TransactionConnectedToLocalGroup. Only one of these fields should be
set, however we didn't have any check for this contraint and it was
error prone.
What those two variables are used is that we are trying to understand if
we should use local execution, the current session, or if we should be
using a connection to execute the current query, therefore the tasks. In
the enum, now it is more clear what these variables mean.
Also, now we have a method to change the local execution status. The
method will error if we are trying to transition from a state to a wrong
state. This will help us avoid problems.
For shardplacements, we were setting nodeid, nodename, nodeport and
nodegroup manually. This makes it very error prone, and it seems that we
already forgot to set some of them. This would mean that they would have
their default values, e.g group id would be 0 when its group id is not
0.
So the implication is that we would have inconsistent worker metadata.
A new method is introduced, and we call the method to set those fields
now, so that as long as we call this method, we won't be setting
inconsistent metadata.
It probably makes sense to have a struct for these fields. We already
have NodeMetadata but it doesn't have nodename or nodeport. So that
could be done over another refactor to make things simpler.
This is possible whenever we aren't pulling up intermediate rows
We want to do this because this was done in 9.2,
some queries rely on the performance of grouping causing distinct values
This change was introduced when implementing window functions on coordinator
ExecuteTaskListExtended is the common method for different codepaths,
and instead of writing separate local execution logics in different
codepaths, it makes more sense to have the logic here. We still need to
do some refactoring, this is an initial step.
After this commit, we can run create shard commands locally. There is a
special case with shard creation commands. A create shard command might
have a concatenated query string, however local execution did not know
how to execute a task with multiple query strings. This is also
implemented in this commit. We go over each query in the concatenated
query string and plan/execute them one by one.
A more clean solution to this would be to make sure that each task has a
single query. We currently cannot do that because we need to ensure the
task dependencies. However, it would make sense to do that at some point
and it would simplify the code a lot.
We had many fields in task related to query strings. It was kind of
complex, and only of them could be set at a time. Therefore it makes
more sense to abstract this and use a union so that it is clear that
only of them should be set.
We have three fields that could have query related strings:
- queryForLocation
- queryStringLazy
- perPlacementQueryStrings
Relatively, they can be set with:
- SetTaskQueryString
- SetTaskQueryIfShouldLazyDeparse
- SetTaskPerPlacementQueryStrings
The direct usage of the query related fields are also removed.
Rename queryForLocalExecution
Currently queryForLocalExecution is only used for deparsing purposes,
therefore it makes sense to rename it to what it is doing.
TaskQueryStringForPlacement simplifies how the executor gets the query
string for a given placement. Task will use the necessary fields to
return the correct query placement string. Executor doesn't need to know
the details for this.
rename TaskQueryString as TaskQueryStringAllPlacements
TaskQueryString returns the query string that will be the same for all
the placements. In INSERT..SELECT the query string can be different for
each placement. Adaptive executor uses TaskQueryStringForPlacement,
which returns the query string for a placement. It makes sense to rename
TaskQueryString as TaskQueryStringAllPlacements as it is returning the
query string for all placements.
rename SetTaskQuery as SetTaskQueryIfShouldLazyDeparse
SetTaskQuery does not always sets the task query. It can set the query
string as well. So it is more clear to name it
SetTaskQueryIfShouldLazyDeparse, since it will set the query not query
string only when we should deparse the query in a lazy way.
It is possible that a task will have different query string for each
placement. This is the case in INSERT..SELECT via repartitioning. When
we are setting task->perPlacementQueryString, we should set
queryStringLazy to NULL. Therefore a method for that purpose is created.
Sometimes we have concatenated query strings for a task. However,
when we want to find each query string, it is not a trivial task.
Therefore, it makes sense to store this in task so that when we need
each query string we can easily get it.
Some refactoring:
Consolidate expression which decides whether GROUP BY/HAVING are pushed down
Rename early pullUpIntermediateRows to hasNonDistributableAggregates
Create WorkerColumnName to handle formatting WORKER_COLUMN_FORMAT
Ignore NULL StringInfo pointers to SafeToPushdownWindowFunction
Fix bug where SubqueryPushdownMultiNodeTree mutates supplied Query,
SafeToPushdownWindowFunction requires the original query as it relies on rtable
A copy will be executed locally if
- Local execution is enabled and current transaction accessed a local placement
- Local execution is enabled and we are inside a transaction block.
So even if local execution is enabled but we are not in a transaction block, the copy will not be run locally.
This will not run locally:
```
COPY distributed_table FROM STDIN;
....
```
This will run locally:
```
SET citus.enable_local_execution to 'on';
BEGIN;
COPY distributed_table FROM STDIN;
COMMIT;
....
```
.
There are 3 ways to do a copy in postgres programmatically:
- from a file
- from a program
- from a callback function
I have chosen to implement it with a callback function, which means that we write the rows of copy from a callback function to the output buffer, which is used to insert tuples into the actual table.
For each shard id, we have a buffer that keeps the current rows to be written, we perform the actual copy operation either when:
- copy buffer for the given shard id reaches to a threshold, which is currently 512KB
- we reach to the end of the copy
The buffer size is debatable(512KB). At a given time, we might allocate (local placement * buffer size) memory at most.
The local copy uses the same copy format as remote copy, which means that we serialize the data in the same format as remote copy and send it locally.
There was also the option to use ExecSimpleRelationInsert to insert
slots one by one, which would avoid the extra
serialization/deserialization but doing some benchmarks it seems that
using buffers are significantly better in terms of the performance.
You can see this comment for more details: https://github.com/citusdata/citus/pull/3557#discussion_r389499054
DESCRIPTION: Fix left join shard pruning in pushdown planner
Due to #2481 which moves outer join planning through the pushdown planner we caused a regression on the shard pruning behaviour for outer joins.
In the pushdown planner we make a union of the placement groups for all shards accessed by a query based on the filters we see during planning. Unfortunately implicit filters for left joins are not available during this part. This causes the inner part of an outer join to not prune any shards away. When we take the union of the placement groups it shows the behaviour of not having any shards pruned.
Since the inner part of an outer query will not return any rows if the outer part does not contain any rows we have observed we do not have to add the shard intervals of the inner part of an outer query to the list of shard intervals to query.
Fixes: #3512
Add failing tests, make changes to avoid crashes at least
Fix HAVING subquery pushdown ignoring reference table only subqueries,
also include HAVING in recursive planning
Given that we have a function IsDistributedTable which includes reference tables,
it seems best to have IsDistributedTableRTE & QueryContainsDistributedTableRTE
reflect that they do not include reference tables in their check
Similarly SublinkList's name should reflect that it only scans WHERE
contain_agg_clause asserts that we don't have SubLinks,
use contain_aggs_of_level as suggested by pg sourcecode
Before this commit, we considered !ContainsRecurringRTE() enough
for NotContainsOnlyRecurringTuples. However, instead, we can check
for existince of any distributed table.
DESCRIPTION: Fixes a bug that causes wrong results with complex outer joins
There are 2 problems with our early exit strategy that this commit fixes:
1- When we decide that a subplan results are sent to all worker nodes,
we used to skip traversing the whole distributed plan, instead of
skipping only the subplan.
2- We used to consider all available nodes in the cluster (secondaries
and inactive nodes as well as active primaries) when deciding on early
exit strategy. This resulted in failures to early exit when there are
secondaries or inactive nodes.
Semmle reported quite some places where we use a value that could be NULL. Most of these are not actually a real issue, but better to be on the safe side with these things and make the static analysis happy.
DESCRIPTION: Replace the query planner for the coordinator part with the postgres planner
Closes#2761
Citus had a simple rule based planner for the query executed on the query coordinator. This planner grew over time with the addigion of SQL support till it was getting close to the functionality of the postgres planner. Except the code was brittle and its complexity rose which made it hard to add new SQL support.
Given its resemblance with the postgres planner it was a long outstanding wish to replace our hand crafted planner with the well supported postgres planner. This patch replaces our planner with a call to postgres' planner.
Due to the functionality of the postgres planner we needed to support both projections and filters/quals on the citus custom scan node. When a sort operation is planned above the custom scan it might require fields to be reordered in the custom scan before returning the tuple (projection). The postgres planner assumes every custom scan node implements projections. Because we controlled the plan that was created we prevented reordering in the custom scan and never had implemented it before.
A same optimisation applies to having clauses that could have been where clauses. Instead of applying the filter as a having on the aggregate it will push it down into the plan which could reach a custom scan node.
For both filters and projections we have implemented them when tuples are read from the tuple store. If no projections or filters are required it will directly return the tuple from the tuple store. Otherwise it will loop tuples from the tuple store through the filter and projection until a tuple is found and returned.
Besides filters being pushed down a side effect of having quals that could have been a where clause is that a call to read intermediate result could be called before the first tuple is fetched from the custom scan. This failed because the intermediate result would only be pulled to the coordinator on the first tuple fetch. To overcome this problem we do run the distributed subplans now before we run the postgres executor. This ensures the intermediate result is present on the coordinator in time. We do account for total time instrumentation by removing the instrumentation before handing control to the psotgres executor and update the timings our self.
For future SQL support it is enough to create a valid query structure for the part of the query to be executed on the query coordinating node. As a utility we do serialise and print the query at debug level4 for engineers to inspect what kind of query is being planned on the query coordinator.
We don't actually use these functions anymore since merging #1477.
Advantages of removing:
1. They add work whenever we add a new node.
2. They contain some usage of stdlib APIs that are banned by Microsoft.
Removing it means we don't have to replace those with safe ones.
Comparison between differently sized integers in loop conditions can cause
infinite loops. This can happen when doing something like this:
```c
int64 very_big = MAX_INT32 + 1;
for (int32 i = 0; i < very_big; i++) {
// do something
}
// never reached because i overflows before it can reach the value of very_big
```
Previously a limitation in the shard pruning logic caused multi distribution value queries to always go into all the shards/workers whenever query also used OR conditions in WHERE clause.
Related to https://github.com/citusdata/citus/issues/2593 and https://github.com/citusdata/citus/issues/1537
There was no good workaround for this limitation. The limitation caused quite a bit of overhead with simple queries being sent to all workers/shards (especially with setups having lot of workers/shards).
An example of a previous plan which was inadequately pruned:
```
EXPLAIN SELECT count(*) FROM orders_hash_partitioned
WHERE (o_orderkey IN (1,2)) AND (o_custkey = 11 OR o_custkey = 22);
QUERY PLAN
---------------------------------------------------------------------
Aggregate (cost=0.00..0.00 rows=0 width=0)
-> Custom Scan (Citus Adaptive) (cost=0.00..0.00 rows=0 width=0)
Task Count: 4
Tasks Shown: One of 4
-> Task
Node: host=localhost port=xxxxx dbname=regression
-> Aggregate (cost=13.68..13.69 rows=1 width=8)
-> Seq Scan on orders_hash_partitioned_630000 orders_hash_partitioned (cost=0.00..13.68 rows=1 width=0)
Filter: ((o_orderkey = ANY ('{1,2}'::integer[])) AND ((o_custkey = 11) OR (o_custkey = 22)))
(9 rows)
```
After this commit the task count is what one would expect from the query defining multiple distinct values for the distribution column:
```
EXPLAIN SELECT count(*) FROM orders_hash_partitioned
WHERE (o_orderkey IN (1,2)) AND (o_custkey = 11 OR o_custkey = 22);
QUERY PLAN
---------------------------------------------------------------------
Aggregate (cost=0.00..0.00 rows=0 width=0)
-> Custom Scan (Citus Adaptive) (cost=0.00..0.00 rows=0 width=0)
Task Count: 2
Tasks Shown: One of 2
-> Task
Node: host=localhost port=xxxxx dbname=regression
-> Aggregate (cost=13.68..13.69 rows=1 width=8)
-> Seq Scan on orders_hash_partitioned_630000 orders_hash_partitioned (cost=0.00..13.68 rows=1 width=0)
Filter: ((o_orderkey = ANY ('{1,2}'::integer[])) AND ((o_custkey = 11) OR (o_custkey = 22)))
(9 rows)
```
"Core" of the pruning logic works as previously where it uses `PrunableInstances` to queue ORable valid constraints for shard pruning.
The difference is that now we build a compact internal representation of the query expression tree with PruningTreeNodes before actual shard pruning is run.
Pruning tree nodes represent boolean operators and the associated constraints of it. This internal format allows us to have compact representation of the query WHERE clauses which allows "core" pruning logic to work with OR-clauses correctly.
For example query having
`WHERE (o_orderkey IN (1,2)) AND (o_custkey=11 OR (o_shippriority > 1 AND o_shippriority < 10))`
gets transformed into:
1. AND(o_orderkey IN (1,2), OR(X, AND(X, X)))
2. AND(o_orderkey IN (1,2), OR(X, X))
3. AND(o_orderkey IN (1,2), X)
Here X is any set of unknown condition(s) for shard pruning.
This allow the final shard pruning to correctly recognize that shard pruning is done with the valid condition of `o_orderkey IN (1,2)`.
Another example with unprunable condition in query
`WHERE (o_orderkey IN (1,2)) OR (o_custkey=11 AND o_custkey=22)`
gets transformed into:
1. OR(o_orderkey IN (1,2), AND(X, X))
2. OR(o_orderkey IN (1,2), X)
Which is recognized as unprunable due to the OR condition between distribution column and unknown constraint -> goes to all shards.
Issue https://github.com/citusdata/citus/issues/1537 originally suggested transforming the query conditions into a full disjunctive normal form (DNF),
but this process of transforming into DNF is quite a heavy operation. It may "blow up" into a really large DNF form with complex queries having non trivial `WHERE` clauses.
I think the logic for shard pruning could be simplified further but I decided to leave the "core" of the shard pruning untouched.
The root of the problem is that, standard_planner() converts the following qual
```
{OPEXPR
:opno 98
:opfuncid 67
:opresulttype 16
:opretset false
:opcollid 0
:inputcollid 100
:args (
{VAR
:varno 1
:varattno 1
:vartype 25
:vartypmod -1
:varcollid 100
:varlevelsup 0
:varnoold 1
:varoattno 1
:location 45
}
{CONST
:consttype 25
:consttypmod -1
:constcollid 100
:constlen -1
:constbyval false
:constisnull true
:location 51
:constvalue <>
}
)
:location 49
}
```
To
```
(
{CONST
:consttype 16
:consttypmod -1
:constcollid 0
:constlen 1
:constbyval true
:constisnull true
:location -1
:constvalue <>
}
)
```
So, Citus doesn't deal with NULL values in real-time or non-fast path router queries.
And, in the FastPathRouter planner, we check constisnull in DistKeyInSimpleOpExpression().
However, in deferred pruning case, we do not check for isnull for const.
Thus, the fix consists of two parts:
- Let PruneShards() not crash when NULL parameter is passed
- For deferred shard pruning in fast-path queries, explicitly check that we have CONST which is not NULL
DESCRIPTION: Fix unnecessary repartition on joins with more than 4 tables
In 9.1 we have introduced support for all CH-benCHmark queries by widening our definitions of joins to include joins with expressions in them. This had the undesired side effect of Q5 regressing on its plan by implementing a repartition join.
It turned out this regression was not directly related to widening of the join clause, nor the schema employed by CH-benCHmark. Instead it had to do with 4 or more tables being joined in a chain. A chain meaning:
```sql
SELECT * FROM a,b,c,d WHERE a.part = b.part AND b.part = c.part AND ....
```
Due to how our join order planner was implemented it would only keep track of 1 of the partition columns when comparing if the join could be executed locally. This manifested in a join chain of 4 tables to _always_ be executed as a repartition join. 3 tables joined in a chain would have the middle table shared by the two outer tables causing the local join possibility to be found.
With this patch we keep a unique list (or set) of all partition columns participating in the join. When a candidate table is checked for a possibility to execute a local join it will check if there is any partition column in that set that matches an equality join clause on the partition column of the candidate table.
By taking into account all partition columns in the left relation it will now find the local join path on >= 4 tables joined in a chain.
fixes: #3276
Previously we only prevented AVG from being pushed down, but this is incorrect:
- array_agg, while somewhat non sensical to order by, will potentially be missing values
- combinefunc aggregation will raise errors about cstrings not being comparable (while we also can't know if the aggregate is commutative)
This commit limits approximating LIMIT pushdown when ordering by aggregates to:
min, max, sum, count, bit_and, bit_or, every, any
Which means of those we previously supported, we now exclude:
avg, array_agg, jsonb_agg, jsonb_object_agg, json_agg, json_object_agg, hll_add, hll_union, topn_add, topn_union
Previously, we've identified the usedSubPlans by only looking
to the subPlanId.
With this commit, we're expanding it to also include information
on the location of the subPlan.
This is useful to distinguish the cases where the subPlan is used
either on only HAVING or both HAVING and any other part of the query.
* Update shardPlacement->nodeId to uint
As the source of the shardPlacement->nodeId is always workerNode->nodeId,
and that is uint32.
We had this hack because of: 0ea4e52df5 (r266421409)
And, that is gone with: 90056f7d3c (diff-c532177d74c72d3f0e7cd10e448ab3c6L1123)
So, we're safe to do it now.
* Relax the restrictions on using the local execution
Previously, whenever any local execution happens, we disabled further
commands to do any remote queries. The basic motivation for doing that
is to prevent any accesses in the same transaction block to access the
same placements over multiple sessions: one is local session the other
is remote session to the same placement.
However, the current implementation does not distinguish local accesses
being to a placement or not. For example, we could have local accesses
that only touches intermediate results. In that case, we should not
implement the same restrictions as they become useless.
So, this is a pre-requisite for executing the intermediate result only
queries locally.
* Update the error messages
As the underlying implementation has changed, reflect it in the error
messages.
* Keep track of connections to local node
With this commit, we're adding infrastructure to track if any connection
to the same local host is done or not.
The main motivation for doing this is that we've previously were more
conservative about not choosing local execution. Simply, we disallowed
local execution if any connection to any remote node is done. However,
if we want to use local execution for intermediate result only queries,
this'd be annoying because we expect all queries to touch remote node
before the final query.
Note that this approach is still limiting in Citus MX case, but for now
we can ignore that.
* Formalize the concept of Local Node
Also some minor refactoring while creating the dummy placement
* Write intermediate results locally when the results are only needed locally
Before this commit, Citus used to always broadcast all the intermediate
results to remote nodes. However, it is possible to skip pushing
the results to remote nodes always.
There are two notable cases for doing that:
(a) When the query consists of only intermediate results
(b) When the query is a zero shard query
In both of the above cases, we don't need to access any data on the shards. So,
it is a valuable optimization to skip pushing the results to remote nodes.
The pattern mentioned in (a) is actually a common patterns that Citus users
use in practice. For example, if you have the following query:
WITH cte_1 AS (...), cte_2 AS (....), ... cte_n (...)
SELECT ... FROM cte_1 JOIN cte_2 .... JOIN cte_n ...;
The final query could be operating only on intermediate results. With this patch,
the intermediate results of the ctes are not unnecessarily pushed to remote
nodes.
* Add specific regression tests
As there are edge cases in Citus MX and with round-robin policy,
use the same queries on those cases as well.
* Fix failure tests
By forcing not to use local execution for intermediate results since
all the tests expects the results to be pushed remotely.
* Fix flaky test
* Apply code-review feedback
Mostly style changes
* Limit the max value of pg_dist_node_seq to reserve for internal use
Comment from code:
/*
* We had to implement this hack because on Postgres11 and below, the originalQuery
* and the query would have significant differences in terms of CTEs where CTEs
* would not be inlined on the query (as standard_planner() wouldn't inline CTEs
* on PG 11 and below).
*
* Instead, we prefer to pass the inlined query to the distributed planning. We rely
* on the fact that the query includes subqueries, and it'd definitely go through
* query pushdown planning. During query pushdown planning, the only relevant query
* tree is the original query.
*/
Deparsing and parsing a query can be heavy on CPU. When locally executing
the query we don't need to do this in theory most of the time.
This PR is the first step in allowing to skip deparsing and parsing
the query in these cases, by lazily creating the query string and
storing the query in the task. Future commits will make use of this and
not deparse and parse the query anymore, but use the one from the task
directly.
This is purely to enable better performance with prepared statements.
Before this commit, the fast path queries with prepared statements
where the distribution key includes a parameter always went through
distributed planning. After this change, we only go through distributed
planning on the first 5 executions.
In this commit, we're introducing a way to prevent CTE inlining via a GUC.
The GUC is used in all the tests where PG 11 and PG 12 tests would diverge
otherwise.
Note that, in PG 12, the restriction information for CTEs are generated. It
means that for some queries involving CTEs, Citus planner (router planner/
pushdown planner) may behave differently. So, via the GUC, we prevent
tests to diverge on PG 11 vs PG 12.
When we drop PG 11 support, we should get rid of the GUC, and mark
relevant ctes as MATERIALIZED, which does the same thing.
These set of tests has changed in both PG 11 and PG 12.
The changes are only about CTE inlining kicking in both
versions, and yielding the exact same distributed planning.
The idea is simple: Inline CTEs(if any), try distributed planning.
If the planning yields a successful distributed plan, simply return
it.
If the planning fails, fallback to distributed planning on the query
tree where CTEs are not inlined. In that case, if the planning failed
just because of the CTE inlining, via recursive planning, the same
query would yield a successful plan.
A very basic set of examples:
WITH cte_1 AS (SELECT * FROM test_table)
SELECT
*, row_number() OVER ()
FROM
cte_1;
or
WITH a AS (SELECT * FROM test_table),
b AS (SELECT * FROM test_table)
SELECT * FROM a JOIN b ON (a.value> b.value);
With this commit we add the necessary Citus function to inline CTEs
in a queryTree.
You might ask, why do we need to inline CTEs if Postgres is already
going to do it?
Few reasons behind this decision:
- One techinal node here is that Citus does the recursive CTE planning
by checking the originalQuery which is the query that has not gone
through the standard_planner().
CTEs in Citus is super powerful. It is practically key for full SQL
coverage for multi-shard queries. With CTEs, you can always reduce
any query multi-shard query into a router query via recursive
planning (thus full SQL coverage).
We cannot let CTE inlining break that. The main idea is Citus should
be able to retry planning if anything goes after CTE inlining.
So, by taking ownership of CTE inlining on the originalQuery, Citus
can fallback to recursive planning of CTEs if the planning with the
inlined query fails. It could have been a lot harder if we had relied
on standard_planner() to have the inlined CTEs on the original query.
- We want to have this feature in PostgreSQL 11 as well, but Postgres
only inlines in version 12
All the code in this commit is direct copy & paste from Postgres
source code.
We can classify the copy&paste code into two:
- Copy paste from CTE inline patch from postgres
(https://git.postgresql.org/gitweb/?p=postgresql.git;a=commitdiff;h=608b167f9f9c4553c35bb1ec0eab9ddae643989b)
These include the functions inline_cte(), inline_cte_walker(),
contain_dml(), contain_dml_walker().
It also include the code in function PostgreSQLCTEInlineCondition().
We prefer to extract that code into a seperate function, because
(a) we'll re-use the logic later (b) we added one check for PG_11
Finally, the struct "inline_cte_walker_context" is also copied from
the same Postgres commit.
- Copy paste from the other parts of the Postgres code
In order to implement CTE inlining in Postgres 12, the hackers
modified the query_tree_walker()/range_table_walker() with the
18c0da88a5
Since Citus needs to support the same logic in PG 11, we copy & pasted
that functions (and related flags) with the names pg_12_query_tree_walker()
and pg_12_range_table_walker()
* WIP
* wip
* add basic logic to run a single job with repartioning joins with adaptive executor
* fix some warnings and return in ExecuteDependedTasks if there is none
* Add the logic to run depended jobs in adaptive executor
The execution of depended tasks logic is changed. With the current
logic:
- All tasks are created from the top level task list.
- At one iteration:
- CurTasks whose dependencies are executed are found.
- CurTasks are executed in parallel with adapter executor main
logic.
- The iteration is repeated until all tasks are completed.
* Separate adaptive executor repartioning logic
* Remove duplicate parts
* cleanup directories and schemas
* add basic repartion tests for adaptive executor
* Use the first placement to fetch data
In task tracker, when there are replicas, we try to fetch from a replica
for which a map task is succeeded. TaskExecution is used for this,
however TaskExecution is not used in adaptive executor. So we cannot use
the same thing as task tracker.
Since adaptive executor fails when a map task fails (There is no retry
logic yet). We know that if we try to execute a fetch task, all of its
map tasks already succeeded, so we can just use the first one to fetch
from.
* fix clean directories logic
* do not change the search path while creating a udf
* Enable repartition joins with adaptive executor with only enable_reparitition_joins guc
* Add comments to adaptive_executor_repartition
* dont run adaptive executor repartition test in paralle with other tests
* execute cleanup only in the top level execution
* do cleanup only in the top level ezecution
* not begin a transaction if repartition query is used
* use new connections for repartititon specific queries
New connections are opened to send repartition specific queries. The
opened connections will be closed at the FinishDistributedExecution.
While sending repartition queries no transaction is begun so that
we can see all changes.
* error if a modification was done prior to repartition execution
* not start a transaction if a repartition query and sql task, and clean temporary files and schemas at each subplan level
* fix cleanup logic
* update tests
* add missing function comments
* add test for transaction with DDL before repartition query
* do not close repartition connections in adaptive executor
* rollback instead of commit in repartition join test
* use close connection instead of shutdown connection
* remove unnecesary connection list, ensure schema owner before removing directory
* rename ExecuteTaskListRepartition
* put fetch query string in planner not executor as we currently support only replication factor = 1 with adaptive executor and repartition query and we know the query string in the planner phase in that case
* split adaptive executor repartition to DAG execution logic and repartition logic
* apply review items
* apply review items
* use an enum for remote transaction state and fix cleanup for repartition
* add outside transaction flag to find connections that are unclaimed instead of always opening a new transaction
* fix style
* wip
* rename removejobdir to partition cleanup
* do not close connections at the end of repartition queries
* do repartition cleanup in pg catch
* apply review items
* decide whether to use transaction or not at execution creation
* rename isOutsideTransaction and add missing comment
* not error in pg catch while doing cleanup
* use replication factor of the creation time, not current time to decide if task tracker should be chosen
* apply review items
* apply review items
* apply review item
Use partition column's collation for range distributed tables
Don't allow non deterministic collations for hash distributed tables
CoPartitionedTables: don't compare unequal types
Previously,
- we'd push down ORDER BY, but this doesn't order intermediate results between workers
- we'd keep FILTER on master aggregate, which would raise an error about unexpected cstrings
Support for ARRAY[] expressions is limited to having a consistent shape,
eg ARRAY[(int,text),(int,text)] as opposed to ARRAY[(int,text),(float,text)] or ARRAY[(int,text),(int,text,float)]
Initialization of queryWindowClause and queryOrderByLimit "memset" underflow these variables.
It's possible due to the invalid usage sizeof this part of the program cause buffer overflow and function return data corruption in future changes.
In plain words, each distributed plan pulls the necessary intermediate
results to the worker nodes that the plan hits. This is primarily useful
in three ways.
(i) If the distributed plan that uses intermediate
result(s) is a router query, then the intermediate results are only
broadcasted to a single node.
(ii) If a distributed plan consists of only intermediate results, which
is not uncommon, the intermediate results are broadcasted to a single
node only.
(iii) If a distributed query hits a sub-set of the shards in multiple
workers, the intermediate results will be broadcasted to the relevant
node(s).
The final item (iii) becomes crucial for append/range distributed
tables where typically the distributed queries hit a small subset of
shards/workers.
To do this, for each query that Citus creates a distributed plan, we keep
track of the subPlans used in the queryTree, and save it in the distributed
plan. Just before Citus executes each subPlan, Citus first keeps track of
every worker node that the distributed plan hits, and marks every subPlan
should be broadcasted to these nodes. Later, for each subPlan which is a
distributed plan, Citus does this operation recursively since these
distributed plans may access to different subPlans, and those have to be
recorded as well.
DESCRIPTION: Expression in reference join
Fixed: #2582
This patch allows arbitrary expressions in the join clause when joining to a reference table. An example of such joins could be found in CHbenCHmark queries 7, 8, 9 and 11; `mod((s_w_id * s_i_id),10000) = su_suppkey` and `ascii(substr(c_state,1,1)) = n2.n_nationkey`. Since the join is on a reference table these queries are able to be pushed down to the workers.
To implement these queries we will widen the `IsJoinClause` predicate to not check if the expressions are a type `Var` after stripping the implicit coerciens. Instead we define a join clause when the `Var`'s in a clause come from more than 1 table.
This allows more clauses to pass into the logical planner's `MultiNodeTree(...)` planning function. To compensate for this we tighten down the `LocalJoin`, `SinglePartitionJoin` and `DualPartitionJoin` to check for direct column references when planning. This allows the planner to work with arbitrary join expressions on reference tables.
When the user picks "round-robin" policy, the aim is that the load
is distributed across nodes. However, for reference tables on the
coordinator, since local execution kicks in immediately, round-robin
is ignored.
With this change, we're excluding the placement on the coordinator.
Although the approach seems a little bit invasive because of
modifications in the placement list, that sounds acceptable.
We could have done this in some other ways such as:
1) Add a field to "Task->roundRobinPlacement" (or such), which is
updated as the first element after RoundRobinPolicy is applied.
During the execution, if that placement is local to the coordinator,
skip it and try the other remote placements.
2) On TaskAccessesLocalNode()@local_execution.c, check
task_assignment_policy, if round-robin selected and there is local
placement on the coordinator, skip it. However, task assignment is done
on planning, but this decision is happening on the execution, which
could create weird edge cases.
This change was actually already intended in #3124. However, the
postgres Makefile manually enables this warning too. This way we undo
that.
To confirm that it works two functions were changed to make use of not
having the warning anymore.
Phase 1 seeks to implement minimal infrastructure, so does not include:
- dynamic generation of support aggregates to handle multiple arguments
- configuration methods to direct aggregation strategy,
or mark an aggregate's serialize/deserialize as safe to operate across nodes
Aggregates can be distributed when:
- they have a single argument
- they have a combinefunc
- their transition type is not a pseudotype
This is necassery to support Q20 of the CHbenCHmark: #2582.
To summarize the fix: The subquery is converted into an INNER JOIN on a
table. This fixes the issue, since an INNER JOIN on a table is already
supported by the repartion planner.
The way this replacement is happening.:
1. Postgres replaces `col in (subquery)` with a SEMI JOIN (subquery) on col = subquery_result
2. If this subquery is simple enough Postgres will replace it with a
regular read from a table
3. If the subquery returns unique results (e.g. a primary key) Postgres
will convert the SEMI JOIN into an INNER JOIN during the planning. It
will not change this in the rewritten query though.
4. We check if Postgres sends us any SEMI JOINs during its join order
planning, if it doesn't we replace all SEMI JOINs in the rewritten
query with INNER JOIN (which we already support).
Postgres doesn't require you to add all columns that are in the target list to
the GROUP BY when you group by a unique column (or columns). It even actively
removes these group by clauses when you do.
This is normally fine, but for repartition joins it is not. The reason for this
is that the temporary tables don't have these primary key columns. So when the
worker executes the query it will complain that it is missing columns in the
group by.
This PR fixes that by adding an ANY_VALUE aggregate around each variable in
the target list that does is not contained in the group by or in an aggregate.
This is done only for repartition joins.
The ANY_VALUE aggregate chooses the value from an undefined row in the
group.
It looks like the logic to prevent RETURNING in reference tables to
have duplicate entries that comes from local and remote executions
leads to missing some tuples for distributed tables.
With this PR, we're ensuring to kick in the logic for reference tables
only.
SaitTalhaNisanci
Onder Kalaci
Hadi Moshayedi
Jelte Fennema
citus bot
Marco Slot
Marco Slot
Halil Ozan Akgül
Nils Dijk
Philip Dubé
Onur Tirtir
Hanefi Onaldi
Markus Sintonen
Önder Kalacı
Khashayar Fereidani
Philip Dubé
Hanefi Onaldi